RyanVM.net Discussion Board

PROBLEMCHYLD

Here you go... Thanks for the last update.

PROBLEMCHYLD

The web ain't what it used to be. More and more people are shutting down sites. Best thing is to make copies of everything. Nothing last forever.

PROBLEMCHYLD

Getting an error Setup failed to install the product catalogs after sliptreaming the latest updates from POS EOL....

PROBLEMCHYLD

What are you guys going to do in the future if this happens again? I can say this, start backing up stuff that's important. Me personally, I won't be doing the back and forth thing. Glad things are working out but a contingency plan needs to be in place and not run here (only) when msfn is down. Bes...

PROBLEMCHYLD

It appears that Microsoft has yanked the Windows Update fix (KB3161608) due in part to it breaking Intel BlueTooth and then in its wisdom replaced it with KB3172605 which still breaks BlueTooth, details here: http://www.infoworld.com/article/3099109/microsoft-windows/microsoft-yanks-buggy-speed-up-...

PROBLEMCHYLD

Kurt_Aust wrote:It worked fine with KB3161608 (update fix) being installed after KB3125574 (convenience update) in VirtualBox testing.

Don't matter, after or before - before or after.

PROBLEMCHYLD

Or, one could just create the batch files for both versions, zipp'em up and post a link.
Lot easier, but also leave the contents of the batch posted. This is a reputable site and members know us, so it shouldn't be a problem uploading the files here in zip format.

PROBLEMCHYLD

I'll assume that you haven't installed WAIK and have gotten oscdimg.exe another way. As it works fine for me just check that: 1. The digital signature of windows6.1-kb3125574-v4-x86_***.msu is valid 2. There is at least 20GB free space on drive C 3. Any security software is disabled 4. All windows ...

PROBLEMCHYLD

Here is a log file of my results using your .cmd file. What drive are \7SP1 and \7RVM on? (Default C):c 1 file(s) copied. The system cannot find the path specified. Check that etfsboot.com and oscdimg.exe have been copied to c:\7RVM, close all other windows and disable your anti-virus program, then ...

PROBLEMCHYLD

I should have listen to my friend and avoided this clueless bullsh!+Â£r.
Propaganda all over again. I'm going to have a drink to this.
Thanks Syvat for exposing this fraud.

PROBLEMCHYLD

I'm using WinXp Pro SP4 and termsrv.dll 5.1.2600.5815 doesn't seem to work. I always get kicked out when a new user login.

PROBLEMCHYLD

I just had to right click the file, click properties and change open with. It was already set to Windows Pic and Fax, but was not remembering my preference. All is fine now. Thanks for a great package. I don't know what caused it but everything is working as normal.

PROBLEMCHYLD

I have found a small but. I use Windows Picture and Fax viewer for slideshows. When ever I click always open with and check the box, it does not remember my preference.

PROBLEMCHYLD

I always install SP4 right after a clean install and everything works great. This is one way of doing it, but you will not get full benefit from it. Best to make an new ISO, with the uSP4 slipstreamed into it. With nLite and RUFUS, its too easy and offers best way to implement the SP What do you me...

PROBLEMCHYLD

I always install SP4 right after a clean install and everything works great.

PROBLEMCHYLD

Just did a clean install, and everything is working great. Thank you for your contribution.

PROBLEMCHYLD

I have to say, you are on top of your updates. Wish I had known before I released SP3.49. Thanks again.

PROBLEMCHYLD

Just so you know, there are tons of hotfixes for WinXp. If I come a cross a list I will post it. Thanks

PROBLEMCHYLD

Here is a small example, NTFS.SYS
the version included in your package is NTFS.SYS 5.1.2600.5712 which is the QFE version and then you have NTFS.SYS 5.1.2600.5782 which is the hotfix version. QFE and Hotfix are NOT the same thing. I think thats where the confusion comes in at.

PROBLEMCHYLD

user_hidden wrote:to get a request only update use the following link and replace the X's with the KBnumber without the "KB"
Code: Select all
http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=XXXXXXX

I know how to get them, I was asking can you make a separate pack with all them in it.

PROBLEMCHYLD

user_hidden wrote:
PROBLEMCHYLD wrote:What I meant was can you create an hotfix package with only hotfixes?
isn't that what WU does (autoupdate), or am I misunderstanding the question?

The hotfixes are by request. You can't get them thru windows update.

PROBLEMCHYLD

PROBLEMCHYLD wrote:@ user_hidden

Do you think its possible to create an updated hotfix package?

What I meant was can you create an hotfix package with only hotfixes?

PROBLEMCHYLD

@ user_hidden

Do you think its possible to create an updated hotfix package?

PROBLEMCHYLD

I have an issue. I have slipstream SP4 to WinXP SP3 Pro and all works fine until I use FDV WinXP fileset files. I get errors when the following files needs to be copied. I know I need to change the flags for the files below. My problem is I don't know what to change them to. I'm in the process of up...

PROBLEMCHYLD

And the fact that you have to run chkdsk multiple times is not a good sign, either. Are you positive that you HDD is perfectly fine? There might be some bad sectors causing this unexpected behaviour (different file is broken every time you run chkdsk). 50740 kb in bad sectors. Windows reports drive...

PROBLEMCHYLD

Looks like there may have been a communication problem, PRIOR to the DRIVERs getting installed. This is why I a tool to INSTALL the motherboard drivers and AHCI (hard drive) driver during the install of windows, so its got the newest installed, right from the start. Just something for you to think ...

PROBLEMCHYLD

[ http://s13.postimg.org/6m91gkvpv/error.jpg http://s21.postimg.org/tnjvq3arn/error2.jpg What is your hardware and what drivers are you installing with it? Its a Dell C600 Latitude. All is working fine after about four chkdsk runs. I get no chkdsk errors until after I install the SP. All of my hard...

PROBLEMCHYLD

[ http://s13.postimg.org/6m91gkvpv/error.jpg http://s21.postimg.org/tnjvq3arn/error2.jpg @ PROBLEMCHYLD When do you get the netcfgw.ch_ error? I haven't reproduced this error. I get it during the middle of installation. I did this on a clean install, nothing but the hardware drivers was on my system...

PROBLEMCHYLD

Everything seems to be working fine so far. I did get one error netcfgw.ch_ could not copy. I had to extract the file and point to the location of the said file, all went well afterwards. Thank you very much.

PROBLEMCHYLD

The issues I reported seems to be fixed. Thanks

PROBLEMCHYLD

poolside wrote: Wait for RC and then integrate it into the source.

That's fine and dandy, but how can he fixed something he's not aware of. Besides, I fixed computers on my spare time, so waiting for RC won't cut it for the customers.

PROBLEMCHYLD

These are the errors I get on a clean install. The machine is Compaq DC7700 CMT. I done a clean install, installed all the drivers and then SP4. This seems to be the only computer to give me problems. The other computers I tested were Laptops and this is a Desktop. http://s30.postimg.org/arp7xamv1/E...

PROBLEMCHYLD

harkaz wrote:For Upgrade Installations to function properly, I need to delete specific Active Setup keys under all HKEY_USERS branches. Is there a way to do it using INF Delreg or should I create a small app doing this?

Yes, this would be the easiest way using the INF option.

PROBLEMCHYLD

Windows Components Wizard patching is now complete! I have found the ideal way to patch ntoc.dll: - If NtComponents line is not present the OC Manager Window appears. - If NtComponents line is present the OC Manager Window DOES NOT appear :) - In both cases the "Installing components" guide appears...

PROBLEMCHYLD

The only updates that appeared at Windows Updates Malicious Software Removal Tool WEPOS and POSReady Microsoft .NET Framework 4 Client Profile. Everything else seem to be fine. I have tested this on a Compaq Armada E500 800 MHz CPU, 512MB Ram, 40GB Seagate HDD. The system is very snappy to be so old...

PROBLEMCHYLD

You mean this nice purple looking calculator. :lol: http://images.six.betanews.com/screenshots/1095797403-1.png EDIT (clarification): The problem I have to solve now is finding the right way of registering xpfixit.inf, without triggering various error messages. Welcome in the club. :D Yup, but I li...

PROBLEMCHYLD

Thanks a lot. I have just tested on real hardware and the install went smooth. I will test a couple of weeks and see if I find any bugs. Congrats!

P.S

Do you think its possible to add Microsoft Calculator Plus in replace of the original file?

PROBLEMCHYLD

Is it possible to keep the original timestamps on all the files? Every file has the date of packaging.

PROBLEMCHYLD

I'm about to start stripping down fdv 2000 Server fileset. I'm going to need some help. What I mean by strip, is that I will be removing everything that is (NOT) server related. No NOTEPAD No WORDPAD No CALCULATOR etc..... The fileset will install only system core files + server files. Nothing more,...

PROBLEMCHYLD

You don't need all three versions of

Microsoft Windows Script 5.6
Microsoft Windows Script 5.7
Microsoft Windows Script 5.8 v3

PROBLEMCHYLD

Once you get all the packages done and release them, I will start working on fdv 2000 Server fileset. Breathe some new life into it. I will remove everything except system files and server files. That means no Calculator, Wordpad, Notepad, etc.......

RyanVM.net Discussion Board

Search found 41 matches

Re: Welcome to Windows XP Service Pack 4

Re: Shutting this down

Re: Welcome to Windows XP Service Pack 4

Re: MSFN.org state

Windows 2000 Server Stripped Down to Core/Server files only