RyanVM Update Pack 1.2.2 - Released May 12, 2005

Post by **RyanVM** » Thu May 12, 2005 5:41 pm

Replies are welcome in this thread, just try to keep them on topic.

What's New

ALL: Added KB885280 Hotfix.
ALL: Added KB887710 Hotfix. (Replaces KB890951 Hotfix).
ALL: Added KB887820 Hotfix.
ALL: Added KB889178 Hotfix. (Replaces KB890552 Hotfix).
ALL: Added KB890210 Hotfix.
ALL: Added KB892050 Hotfix.
ALL: Added KB892235 Hotfix.
ALL: Added KB893310 Hotfix.
ALL: Added KB893605 Hotfix.
ALL: Added KB894069 Hotfix. (Replaces KB893226 Hotfix).
ALL: Added KB894072 Hotfix.
ALL: Added KB894088 Hotfix.
ALL: Added KB894463 Hotfix. (Replaces KB885936 Hotfix).
ALL: Added KB894480 Hotfix. (Replaces KB891570 Hotfix).
ALL: Added KB894686 Hotfix.
ALL: Added KB894871 Hotfix. (Replaces KB887816 and KB888239 Hotfixes).
ALL: Added KB895181 Hotfix.
ALL: Added KB895536 Hotfix. (Replaces KB888603 Hotfix).
ALL: Added KB896017 Hotfix.
ALL: Added KB896156 Hotfix.
ALL: Added KB896166 Hotfix. (Replaces KB890953 Hotfix).
ALL: Added KB896178 Hotfix. (Replaces KB889136 Hotfix).
ALL: Added KB896430 Hotfix. (Replaces KB884047 Hotfix).
ALL: Added KB896626 Hotfix.
ALL: Added KB896684 Hotfix.
ALL: Added KB896725 Hotfix.
ALL: Added KB896984 Hotfix. (Replaces KB885855 Hotfix).
ALL: Added KB896728 Hotfix. (Replaces KB873333 Hotfix).
ALL: Added KB897327 Hotfix.
ALL: Added KB898060 Hotfix. (Replaces KB893066 Hotfix).
ALL: Added KB898444 Hotfix. (Replaces KB893086 Hotfix).
ALL: Added SafeDisc Driver Fix 4.00.060.
ALL: CAB SDK version of makecab used for all CAB compression.
ALL: Improved compression ratio on driver CAB recompression (saves about 3MB).
ALL: Updated KB892559 Hotfix.
ALL: Updated KB893357 Hotfix.
ALL: Updated Malicious Software Removal Tool registry entry to version 1.4.
FULL: Added Unlocker 1.6.1.
LITE: Added Windows Update 5.4.3790.2182.

Same installation directions as last time, for a change.

Download Here

Known Issues

Windows Explorer crashes when viewing a network share.
Windows Installer 3.1 still shows up on Windows Update

Both of these are fixed by the mini update below:
http://www.ryanvm.net/forum/viewtopic.php?p=2444#2444

dragonfixed · Post by **dragonfixed** » Thu May 12, 2005 8:09 pm

New pack not on website to download

Post by **RyanVM** » Thu May 12, 2005 8:16 pm

Yes it is. If you're not seeing it, it's a problem on your end.

(And posting in my forums and PMing on MSFN is very annoying. Pick one form or another).

EDIT: And clearly it is for at least one person

http://www.ryanvm.net/forum/viewtopic.php?t=205

dkreifus · Post by **dkreifus** » Fri May 13, 2005 8:58 am

You the best man. Post-paycheck, I'll try to give you a small donation!

PsiMoon314 · Post by **PsiMoon314** » Fri May 13, 2005 2:22 pm

Hi Ryan,

I've tested the Full 1.2.2 update pack on Windows XP Home OEM (UK Release) and so far no problems have been seen.

This was tested on a real PC, not a virtual one and QFECheck reports all hotfixes are installed.

Hope this helps.

Kind Regards

Simon
--

war59312 · Post by **war59312** » Fri May 13, 2005 5:11 pm

Another great release. No issues atm!

Thanks once again,
Will

Post by **RyanVM** » Fri May 13, 2005 5:22 pm

1.2.2 is appearing to be the smoothest release yet so far

itsme_4ucz · Post by **itsme_4ucz** » Sat May 14, 2005 5:32 am

Hi
@RyanVM
ur right this time my installation went flawless.
Thks for the gr8 work.

nuhi · Post by **nuhi** » Sat May 14, 2005 2:37 pm

Flawless...SP3 go home

smc1979 · Post by **smc1979** » Sat May 14, 2005 6:25 pm

I installed your 1.2.2 pack and installed it on a computer. works great but one problem. When I view a network share drwatson shows up in the processes and closes every single window that is open to any share. I installed an older version with pack 1.2 and it doesnt have the problem. Also if I right click on a open share it locks up that window. If I kil drwatson the window closes. Like I said this doesnt happen with a prev. version of your pack. ONLY 1.2.2

Post by **RyanVM** » Sat May 14, 2005 6:34 pm

Can anyone else reproduce?

sleepnmojo · Post by **sleepnmojo** » Sat May 14, 2005 9:21 pm

smc1979 wrote:I installed your 1.2.2 pack and installed it on a computer. works great but one problem. When I view a network share drwatson shows up in the processes and closes every single window that is open to any share. I installed an older version with pack 1.2 and it doesnt have the problem. Also if I right click on a open share it locks up that window. If I kil drwatson the window closes. Like I said this doesnt happen with a prev. version of your pack. ONLY 1.2.2

Thank god I'm not the only one. I have this problem too, and am trying to find the culprit. Didn't have the problem in 1.2.1 either.

codejunkie · Post by **codejunkie** » Sat May 14, 2005 10:05 pm

sleepnmojo wrote:
smc1979 wrote:I installed your 1.2.2 pack and installed it on a computer. works great but one problem. When I view a network share drwatson shows up in the processes and closes every single window that is open to any share. I installed an older version with pack 1.2 and it doesnt have the problem. Also if I right click on a open share it locks up that window. If I kil drwatson the window closes. Like I said this doesnt happen with a prev. version of your pack. ONLY 1.2.2
Thank god I'm not the only one. I have this problem too, and am trying to find the culprit. Didn't have the problem in 1.2.1 either.

Oh, theres 3 of us now with the same problem.

One question are you call trying to connect to a remote PC with same version of RyanVMs pack, Im connecting 1.2.2 to 1.2 (With all Updates since on WU) I will be reinstalling it soon but I have to be sure I am not going to mess up Thunderbird took me ages to setup! theres no easy way of changing the Email folders location

Oh well, least i have settings Exporter now should help!

Post by **RyanVM** » Sat May 14, 2005 10:17 pm

I'm betting it's the updated mrxsmb.sys that's the culprit. If one of you feels like experimenting, try putting the 1.2.1 version back in and see if the problem goes away (ignoring the QFECheck messages of course)

Forever · Post by **Forever** » Sat May 14, 2005 11:32 pm

I'm having the same problem.

codejunkie, this is the only PC I have RyanVMs pack on, the others are Windows Update updated.

markd · Post by **markd** » Sun May 15, 2005 1:21 am

I am getting a similar problem I think. I did a clean install (slipstream with 1.2.2 using Nlite) when I view a network share and attempt to access a file I get the following error box - Explorer.EXE Application Error The instruction at "0x62c38167 referenced memory at "0x00000000". The memory could not be "read" I did what Ryan suggested and replaced mrxsmb.sys with the previous 1.2.1 version. That made no difference to the problem. I removed DR Watson with Nlite so I may be getting a slightly different message. Both networks have the same version of Ryan's pack 1.2.2 and the same error message.

nuhi · Post by **nuhi** » Sun May 15, 2005 6:49 am

Has anyone tried without nlite, I would like to see can I help or is it hotfix issue (which I doubt).

Viking · Post by **Viking** » Sun May 15, 2005 8:48 am

Yes, I've had the same problem without nLite. Sorry nuhi, but I prefer manual integration. Haven't got time today to test putting the old version back for you sorry Ryan, but if nobody's posted here tomorrow, I will give it a try for you...

Post by **RyanVM** » Sun May 15, 2005 10:09 am

If we can figure out which hotfix is causing it, I can get in touch with MS and see what we can figure out for a solution. Probably a new hotfix

EDIT: BTW, I can reproduce the problem, and I think I know which file is causing it. Try replacing the 1.2.2 version of twext.dll with the 1.2.1 version.

EDIT2: I'm trying out an ISO with the different twext.dll right now. If anyone else wants to try it, get it here.

EDIT3: Using the older twext.dll seems to fix it for me. I'll email MS and see if we can get the ball rolling for a fix.

nuhi · Post by **nuhi** » Sun May 15, 2005 2:26 pm

Viking, no no, I'm glad to hear that, now we know where to look.

codejunkie · Post by **codejunkie** » Sun May 15, 2005 6:01 pm

I don't thing your program could compile mine Nuhi, the apps that I include in my Unattended are split into catagries

I havent got round to creating a AutoIt3 script to compile the DVD yet

Folder layout

codejunkie · Post by **codejunkie** » Sun May 15, 2005 6:56 pm

Ignore QFECheck....Why??

Tested it now, works but qfecheck still reports it
this is due to the catalog file not reg entrys

RVMUpPck.inf

Replace

Code: Select all

HKLM,"%SP3UPDATES%\KB895536\Filelist\0","BuildCheckSum",0,"180e8"
HKLM,"%SP3UPDATES%\KB895536\Filelist\0","BuildDate",0,"Thu Mar 10 12:48:54 2005"
HKLM,"%SP3UPDATES%\KB895536\Filelist\0","FileName",0,"twext.dll"
HKLM,"%SP3UPDATES%\KB895536\Filelist\0","Location",0,"%11%"
HKLM,"%SP3UPDATES%\KB895536\Filelist\0","Version",0,"6.0.3800.2627"

with

Code: Select all

HKLM,"%SP3UPDATES%\KB895536\Filelist\0","BuildCheckSum",0,"19fdd"
HKLM,"%SP3UPDATES%\KB895536\Filelist\0","BuildDate",0,"Wed Feb 02 11:06:19 2005"
HKLM,"%SP3UPDATES%\KB895536\Filelist\0","FileName",0,"twext.dll"
HKLM,"%SP3UPDATES%\KB895536\Filelist\0","Location",0,"%11%"
HKLM,"%SP3UPDATES%\KB895536\Filelist\0","Version",0,"6.0.3800.2606"

Oh and dont forget to copy the twext.dl_ over!

What do you think Ryan? little temp-patch if it works for you, I will have a look my self use file shares all the time!

Viking · Post by **Viking** » Sun May 15, 2005 7:24 pm

Ryan, I can confirm that replacing twext.dl_ on my install fixes the problem, and I can browse shares again. Will you just submit a patch dropping KB895536 for the time being?

orcoxp · Post by **orcoxp** » Sun May 15, 2005 10:11 pm

I have the reg tweak for registering and unregistering DLL's on my right click...

Unregistering twext.dll seem to have done the trick.

EDIT...PS, I thought maybe XPize might have had something to do with this but there's no icons in this file.

EDIT2...We're not the only ones seeing this... check this out...
http://www.eggheadcafe.com/ng/microsoft ... 344336.asp

Post by **RyanVM** » Mon May 16, 2005 6:11 am

Plus the fact that I don't use XPize...

But yeah, I've emailed MS from the same account that I requested the hotfix from, so we'll see what comes of it.

markd · Post by **markd** » Mon May 16, 2005 6:48 am

Ryan , I also can confirm that replacing twext.dll with the older version fixes the problem. Thanks for working on this.

Post by **RyanVM** » Mon May 16, 2005 7:55 am

I'll put out a mini update on the forums tonight containing the newer msi.dll and older twext.dll.

DLF · Post by **DLF** » Tue May 17, 2005 1:27 pm

I'll put out a mini update on the forums tonight

Thanks Ryan, I'm getting it too on a SP0 install with manual integration of SP2 and RyanVM122 FullPack.
Can run the Win network wiz but says "an error occurred during setup". When browsing network shares, PC locks up.

ViVa · Post by **ViVa** » Wed May 18, 2005 8:32 am

I used nLite 0.99.9 beta and your full pack 1.2.2 to make a Windows XP SP2 + Post-SP2 CD. I noticed that "KB893803 - Windows Installer 3.1" is in 1.2.2, however, it popped up @ WU today...? Qfecheck reports all hotfixes installed properly.

Post by **RyanVM** » Wed May 18, 2005 11:37 am

ViVa wrote:I used nLite 0.99.9 beta and your full pack 1.2.2 to make a Windows XP SP2 + Post-SP2 CD. I noticed that "KB893803 - Windows Installer 3.1" is in 1.2.2, however, it popped up @ WU today...? Qfecheck reports all hotfixes installed properly.

http://www.ryanvm.net/forum/viewtopic.php?t=194

larciel · Post by **larciel** » Wed May 18, 2005 1:31 pm

so download msi.dll from that thread and twext.dl_ from here and put those into i386 folder and we're all fixed?

Post by **RyanVM** » Wed May 18, 2005 2:09 pm

Yeah. The only caveat for the time being is that QFECheck will complain about KB895536. I've been a bit busy lately, but I still am planning on making a small update which will have a properly set up INF for the job.

Toolman · Post by **Toolman** » Wed May 18, 2005 5:17 pm

twext.dl_ version 2606 has problems with UPnP ....

I use UPnP to get MSN Messenger running without having to setup rules in my Draytek (witch supports UPnP perfectly) ...

It's the CAT file that has to be changed also ...

Post by **RyanVM** » Wed May 18, 2005 5:19 pm

Well, the CAT file is just for Windows File Protection. In your case, I'd say it's best to just use the standard SP2 (build 2180) version of the file for the time being.

Post by **RyanVM** » Wed May 18, 2005 10:05 pm

OK, as promised, here is the mini-update. It weighs in at about 860K and includes the updated msi.dll and reverts twext.dll back to the version from 1.2.1. Just extract the RAR to i386 after installing the update pack like normal.
<snip>
See this thread:
http://www.ryanvm.net/forum/viewtopic.php?t=242

Let me know if you encounter any issues after using this.

toods · Post by **toods** » Thu May 19, 2005 3:00 am

RyanVM wrote:OK, as promised, here is the mini-update. It weighs in at about 860K and includes the updated msi.dll and reverts twext.dll back to the version from 1.2.1. Just extract the RAR to i386 after installing the update pack like normal.
<snip>

Let me know if you encounter any issues after using this.

Just a beginners question: If I use nLite, at what stage do I use the above mini-updates?.

Thank you.

larciel · Post by **larciel** » Thu May 19, 2005 3:07 am

just extrac the files to i386 folder

overwrite all

cybpsych · Post by **cybpsych** » Thu May 19, 2005 3:22 am

Hi RyanVM, thx for the update!

Post by **RyanVM** » Thu May 19, 2005 6:11 am

toods wrote:
RyanVM wrote:OK, as promised, here is the mini-update. It weighs in at about 860K and includes the updated msi.dll and reverts twext.dll back to the version from 1.2.1. Just extract the RAR to i386 after installing the update pack like normal.
<snip>

Let me know if you encounter any issues after using this.
Just a beginners question: If I use nLite, at what stage do I use the above mini-updates?.

Thank you.

Before CD image creation

Cipherfx · Post by **Cipherfx** » Thu May 19, 2005 7:01 am

Thanks a lot for the UPDATES

itsme_4ucz · Post by **itsme_4ucz** » Thu May 19, 2005 9:33 am

Hi RyanVM
I am facin a typicla problem ,after CD image creation ,installetion on virtualpc i didnt find qfe.exe in system drive.I rechecked every thing again i didnt find any problem in my procedure. Can u tell me my mistake if any where i am wrong.
Thk u!

Post by **RyanVM** » Thu May 19, 2005 10:41 am

Assuming you used the Medium or Full pack (it's not in Lite), it's qfecheck.exe, not qfe.exe.

itsme_4ucz · Post by **itsme_4ucz** » Thu May 19, 2005 1:22 pm

sorry i miss spelled it (qfecheck.exe).
here attachment.
http://rapidshare.de/files/1859702/New.rar.html
i am unable to find the mistake.
Thk u!

Post by **RyanVM** » Thu May 19, 2005 4:48 pm

My only guess is that something isn't executing properly. QFECheck should be in windows\system32

itsme_4ucz · Post by **itsme_4ucz** » Thu May 19, 2005 10:45 pm

Thanks a lot for the UPDATES .
i did it once again but still same ,ur pack things arent there in windows\system32.

sleepnmojo · Post by **sleepnmojo** » Thu May 19, 2005 10:55 pm

itsme_4ucz wrote:Thanks a lot for the UPDATES .
i did it once again but still same ,ur pack things arent there in windows\system32.

Do you add an entry to sysoc.inf? I usually do this manually, otherwise I have problems.

itsme_4ucz · Post by **itsme_4ucz** » Fri May 20, 2005 12:23 am

no ,i did not add an entry to sysoc.inf.
wat entry r u talking abt i have never added any befor this.
any could u tell me those entries .i ll give try to those entries .
Thku! for the reply.

Rudi1 · Post by **Rudi1** » Fri May 20, 2005 5:54 am

Hi RyanVM!

Thank you for this mini update!I like to ask you if this mini update already included in full version 1.2.2?

Cheers!

Post by **RyanVM** » Fri May 20, 2005 6:07 am

itsme_4ucz wrote:Thanks a lot for the UPDATES .
i did it once again but still same ,ur pack things arent there in windows\system32.

If it's not there, then the INF isn't executing properly (and I'm betting that's not the only problem you're having)

sleepnmojo wrote:
itsme_4ucz wrote:Thanks a lot for the UPDATES .
i did it once again but still same ,ur pack things arent there in windows\system32.
Do you add an entry to sysoc.inf? I usually do this manually, otherwise I have problems.

__integrate.exe copies over a pre-modded sysoc.inf when it runs.

Rudi1 wrote:Hi RyanVM!

Thank you for this mini update!I like to ask you if this mini update already included in full version 1.2.2?

Cheers!

No, it isn't.

itsme_4ucz · Post by **itsme_4ucz** » Fri May 20, 2005 8:15 am

Hi
RyanVM Your internal pack (RVMUpPck.cab) isnt getting executed, non of the files r in my system drive.
still confused where am i goin wrong.

RyanVM.net Discussion Board