RyanVM Update Pack 2.1.0 - Released July 14, 2006

biatche · Post by **biatche** » Thu Aug 10, 2006 2:29 am

and what about all the warnings in event viewer? is it really a good idea to just ignore em?

so mmc is an ignorable issue.... but what's causing it really though... an error isn't that perfect.. whats it about... and what about winmgmt? every error on winmgmt dont seem good to me

quite some time ago, i posted explorer.exe not closing properly and so on, now i just get this feeling its somehow related to winmgmt. my newer integrations always got this stalling and explorer.exe not closing properly issue..

my older integrations don't got this issue... (early this year)

RogueSpear · Post by **RogueSpear** » Thu Aug 10, 2006 9:06 am

I've been using MMC every single day for 6 years now. Version 1.x was the only stable version I had ever used. Jumping ahead to the current version 3 - I upgraded to MMC3 manually prior to Ryan integrating it into the Update Pack and I sporadically got errors with it then and get the same ones now after integration.

So in short, from my personal experience the integration of MMC3 is fine, it's the product itself that is typically Microsoft. As far as winmgmt errors go in the event viewer, I've always had them as well. Whether or not MMC3 was in installed manually or via direct integration.

There have always been event viewer errors that are consistent with every install going back to NT4. I used to spend my days on web sites like eventid.net, even had a subscription for a few years, but after a while for better or worse you learn to just ignore certain event viewer entries.

datalife · Post by **datalife** » Thu Aug 10, 2006 10:22 am

...new august patches are integrated in the 2.1.0 RVMU or are planned in the next?

Thanks!

Sanjay · Post by **Sanjay** » Thu Aug 10, 2006 10:30 am

datalife wrote:...new august patches are integrated in the 2.1.0 RVMU or are planned in the next?

Thanks!

The August patches are not included in RVMU 2.1.0 although a new version including them ought to hopefully be out any time now.

ricktendo64 · Post by **ricktendo64** » Thu Aug 10, 2006 11:04 am

You can look next to the updatepack, it has the release date on it

Post by **RyanVM** » Thu Aug 10, 2006 12:38 pm

I've been horrendously busy on campus lately (working ~12 hour days), so my day pretty much consists of waking up at 6-6:30AM, taking the train into the city, working until 7-8PM, taking the train home, and crashing on the couch until my wife drags me to bed. So yeah, don't expect any updates until this weekend when I get a chance to get caught up on sleep.

datalife · Post by **datalife** » Thu Aug 10, 2006 1:27 pm

OK!

Thanks Ryan

p.s. off topics...
... Ryan your site run Mediawiki 1.6.8 with php4 or 1.7.1 with php5?

Post by **RyanVM** » Thu Aug 10, 2006 3:57 pm

1.7.1

datalife · Post by **datalife** » Thu Aug 10, 2006 11:38 pm

Tkanks!

My server run with godaddy hosting and php5 don't work!

P.S. add

Problem solved!
created .htaccess in the root of my hosting with this two lines
AddHandler x-httpd-php5 .php
AddHandler x-httpd-php .php4

biatche · Post by **biatche** » Fri Aug 11, 2006 1:07 am

just checking.... anyone got problems detecting monitor -- does yours show up as "default monitor" if you install no monitor driver?

or can it detect it properly / "pnp monitor"

perrin · Post by **perrin** » Sat Aug 12, 2006 7:35 pm

Any news on the update for the patch tuesday august files. Its 8 updates, should be quick

Just holding off till the latest for my new install

avneet25 · Post by **avneet25** » Sun Aug 13, 2006 2:59 am

read above .. RYAN is busy with his work.. he will be releasing it in the weekend..

MrNxDmX · Post by **MrNxDmX** » Sun Aug 13, 2006 8:42 am

biatche wrote:just checking.... anyone got problems detecting monitor -- does yours show up as "default monitor" if you install no monitor driver?
or can it detect it properly / "pnp monitor"

Whats the difference between default monitor and "pnp monitor"? or will it create any differences?

mindwarper · Post by **mindwarper** » Sun Aug 13, 2006 9:24 am

OK I have everything prepared for a install CD to make with integrator and nLite, but I hold oof until 2.1.1 update pack is made availöable...
In other words I am patient enough

biatche · Post by **biatche** » Sun Aug 13, 2006 11:53 pm

difference is pnp will or should only list allowed/possible resolutions and may* be able to detect best refresh rate.

default monitor will probably allow resolutions that the monitor can't support.

cyberloner · Post by **cyberloner** » Mon Aug 14, 2006 12:41 am

Ryan gonna busy again... a lot updates coming again
no rush for it... no one can hack with those exploit .. unless microsoft wanna hack the world

datalife · Post by **datalife** » Mon Aug 14, 2006 5:18 am

news for next release?

Post by **RyanVM** » Mon Aug 14, 2006 6:39 am

When it's done

Oh, and I had a productive weekend

datalife · Post by **datalife** » Mon Aug 14, 2006 6:53 am

Fantatstic! Ryan boombastic...

MrNxDmX · Post by **MrNxDmX** » Mon Aug 14, 2006 8:15 am

biatche wrote:difference is pnp will or should only list allowed/possible resolutions and may* be able to detect best refresh rate.

default monitor will probably allow resolutions that the monitor can't support.

ok,thanx

Ryan wrote:Oh, and I had a productive weekend

we all waiting for this

Aserone · Post by **Aserone** » Mon Aug 14, 2006 8:57 am

This is actually the first time i'm biting my nails and hoping to see the pack released. I'm usually a very patient person, but my timing s*cks when it comes to the updatepack releases.

I've built a "Post RVM update pack" including a bunch of unofficial fixes (might go public if I feel I got the time), and it's targeted at 2.1.0 but I can't possibly work on it anylonger before 2.1.1, simply because it feels as it's going to be released soon, mind games.

But please take your time, I really respect you've got other things to do right now!

ebin25 · Post by **ebin25** » Mon Aug 14, 2006 12:12 pm

Bâshrat the Sneaky has been busy as well. Be sure to include DP Base 6.08.2 when updating your XPCD with Update Pack 2.1.1

rytukz · Post by **rytukz** » Mon Aug 14, 2006 2:58 pm

RyanVM wrote:When it's done

Oh, and I had a productive weekend

wow - in this week I will buy new hard disk

I hope in this weenkend have and new installed windows with RVM UP 2.1.1

perrin · Post by **perrin** » Mon Aug 14, 2006 5:16 pm

Hopefully it wont be as long as next weekend

ricktendo64 · Post by **ricktendo64** » Mon Aug 14, 2006 5:35 pm

“He that can have Patience, can have what he will”
Benjamin Franklin

Post by **RyanVM** » Mon Aug 14, 2006 7:47 pm

"Beer is proof that God loves us and wants us to be happy."
-Ben Franklin

mr_smartepants · Post by **mr_smartepants** » Mon Aug 14, 2006 8:49 pm

RyanVM wrote:"Beer is proof that God loves us and wants us to be happy."
-Ben Franklin

Amen brother!

Can I have a "Hallelujah"?

Kelsenellenelvian · Post by **Kelsenellenelvian** » Mon Aug 14, 2006 8:58 pm

Hallelujah

Post by **RyanVM** » Mon Aug 14, 2006 9:02 pm

I'm enjoying a nice weissbier right now while I wait for some tests to finish

ricktendo64 · Post by **ricktendo64** » Mon Aug 14, 2006 9:07 pm

Benny says ♫ Halleeeeeeeluuuuuuuujaaaaaaaah! ♫

Post by **RyanVM** » Mon Aug 14, 2006 9:47 pm

http://www.ryanvm.net/forum/viewtopic.php?t=2831