RyanVM Post-SP3 Update Pack 1.0.1 - Released 2008-09-09

Post by **RyanVM** » Tue Sep 09, 2008 9:56 pm

By jove, what do we have here? New Update Packs for all!

One request - If you like the service this site provides, please consider supporting it with a small donation for an improved server or by clicking an ad or two on the site.

What's New
Version 1.0.1

Added KB938464 Hotfix.
Added KB948046 Hotfix.
Added KB949033 Hotfix.
Added KB950162 Hotfix.
Added KB951410 Hotfix. Replaces KB952825 Hotfix.
Added KB951624 Hotfix. Replaces KB951830 Hotfix.
Added KB952079 Hotfix.
Added KB953323 Hotfix. Replaces KB950582 Hotfix.
Added KB955043 Hotfix.
Added KB955535 Hotfix. Replaces KB954956 Hotfix.
Added KB955843 Hotfix.
Added KB955988 Hotfix. Replaces KB953955 Hotfix.
Added KB956072 Hotfix.
Updated Malicious Software Removal Tool registry key to version 2.2.

For the love of God, read the nLite or Integrator directions for how to properly integrate this pack.

Notes

nLite 1.4.9 or RyanVM Integrator 1.5.3 is required to properly integrate this release.
If you used nLite to integrate the pack and are having problems, PLEASE read this thread before reporting problems.

Download Here
Or From My Website

Known Issues

None.

If you do run into anything you think is an error, be sure to consult with the FAQ on my site before asking about it here.

Kelsenellenelvian · Post by **Kelsenellenelvian** » Tue Sep 09, 2008 9:58 pm

TechnoHunter · Post by **TechnoHunter** » Tue Sep 09, 2008 9:59 pm

Thanks again!

laddanator · Post by **laddanator** » Tue Sep 09, 2008 10:05 pm

You are on top of things good job

ssjkakaroto · Post by **ssjkakaroto** » Tue Sep 09, 2008 10:19 pm

Very fast update! Thanks a lot Ryan!

Mavericks choice · Post by **Mavericks choice** » Tue Sep 09, 2008 10:23 pm

Thanks again VM.

Cheers
MC.

code65536 · Post by **code65536** » Tue Sep 09, 2008 10:24 pm

For KB948046, the only files that that differ between the hotfix and SP3 are the six files with March 2008 timestamps (pcl*res.dll and uni*.dll), so you can omit all the other files from that hotfix in the future to save a wee bit of space.

(*) Well, not quite. There is one other file in the hotfix that differs from what already exists in driver.cab. It's one of the GPD files (can't remember which; it's been a while since I last looked at this hotfix), but when you diff it, you'll see that the only change between the old and new version is actually a bug being introduced in the new version!

Post by **RyanVM** » Tue Sep 09, 2008 10:26 pm

Thanks.

jdrom17 · Post by **jdrom17** » Tue Sep 09, 2008 10:28 pm

Awesome, thanks Ryan!

I'll help seed the torrent to show my support.

dkrus · Post by **dkrus** » Tue Sep 09, 2008 10:50 pm

Thanks Ryan

ccl0 · Post by **ccl0** » Tue Sep 09, 2008 11:43 pm

by jove!!

crashfly · Post by **crashfly** » Wed Sep 10, 2008 1:13 am

Ryan, once again you are the best. Thank you for keeping on top of the updates.

Edit: I noticed you linked to the "post SP2 update" location. Not a problem to get to the "post SP3" files, but something to be aware of Ryan.

FrizzleFry · Post by **FrizzleFry** » Wed Sep 10, 2008 2:52 am

Ryan, the from my website link is going to the sp2 page... the URL can be manually adjusted but I am sure that is not what was intended.

Post by **5eraph** » Wed Sep 10, 2008 3:08 am

Link fixed. Thanks for noticing.

yumeyao · Post by **yumeyao** » Wed Sep 10, 2008 4:43 am

@code65536 and ryan:
i can't find the different gpd file. i compared those files using Beyond Compare 2.5.3, it shows only six dll files differs.

Stimpy · Post by **Stimpy** » Wed Sep 10, 2008 6:41 am

Many thanks Ryan!

code65536 · Post by **code65536** » Wed Sep 10, 2008 9:13 am

yumeyao wrote:@code65536 and ryan:
i can't find the different gpd file. i compared those files using Beyond Compare 2.5.3, it shows only six dll files differs.

Hmm, that's strange. Maybe this is a problem that exists only for the ENU version, and not for CHS?

Here's what I get when I diff the GPD files in SP3.cab with the ones from the hotfix's SP3QFE dir... (btw, I meant to say "SP3.cab", not "driver.cab" in my post earlier)

Code: Select all

--- SP3\pclxl.gpd       Tue May 15 13:38:16 2007
+++ SP3QFE\pclxl.gpd    Fri Nov 30 11:32:08 2007
@@ -419,4 +419,4 @@
     sA5Paper: =ubyte "<02>" "A5"
     sA6Paper: =ubyte "<02>" "A6"
-    sJB6Paper: =ubyte "<06>" "JIS B6"
+    sJB6Paper: =ubyte "<02>" "JIS B6"
 }

The change being introduced by the hotfix to this particular file is obviously wrong since the second field (<??>) is supposed to contain the size of the third field.

yumeyao · Post by **yumeyao** » Wed Sep 10, 2008 10:17 pm

4files here appear <06>
they are simplified chinese sp3 and kb948046, japanese sp3 and kb948046.

haven't got an english hotfix for this. but i believe it's what you raid - it's wrong

Chrysalis · Post by **Chrysalis** » Thu Sep 11, 2008 3:37 pm

I reinstalled xp on my main box on the 9th sept :p

nevertherless thanks.

Tr110022 · Post by **Tr110022** » Thu Sep 11, 2008 4:14 pm

WOW
that was fast

thanks very much Ryan

ozzxp · Post by **ozzxp** » Thu Sep 11, 2008 4:26 pm

Thanks nice work

TieLay · Post by **TieLay** » Fri Sep 12, 2008 3:19 am

Some problems with Microsoft Terminal Services Client - it's missed after integration
And PLUGIN.OCX missed too.

Post by **RyanVM** » Fri Sep 12, 2008 7:54 pm

plugin.ocx is on purpose. It's been that way for ages.

Terminal Services Client WFM...

hartless_1 · Post by **hartless_1** » Sat Sep 13, 2008 2:41 am

Thanks for the post SP3 pack. Just posting to say that I intergrated with NLite 1.4.6 because I didn`t look but got a great result anyway.
XP rocks. Ryan rocks.

Post by **RyanVM** » Sat Sep 13, 2008 9:30 am

You should at least be using 1.4.9 for best results.

ENU_user · Post by **ENU_user** » Sat Sep 13, 2008 6:47 pm

ryan, I think these entries are missing a section where the listed need to eventually land into driver.cab unless...

Code: Select all

pcl4res.dll
p6font.gpd
p6disp.gpd
pcl5eres.dll
pclxl.gpd
pjl.gpd
portcls.sys
stdnames.gpd
pclxl.dll
pcl5ures.dll
stdschem.gdl
stddtype.gdl
wzcsvc.dll
unires.dll
unidrvui.dll
unidrv.hlp
unidrv.dll
ttfsub.gpd
ntkrnlpa.exe
stdschmx.gdl
locale.gpd
ntkrpamp.exe

yumeyao · Post by **yumeyao** » Sat Sep 13, 2008 8:37 pm

yeah but now both nlite and integrator can automatically do this

garson · Post by **garson** » Sat Sep 13, 2008 8:46 pm

Can I integrate this over 1.0.0a?

ENU_user · Post by **ENU_user** » Sat Sep 13, 2008 8:50 pm

yumeyao wrote:yeah but now both nlite and integrator can automatically do this

yumeyao, thanks thats what i was suspecting ,but im testing the rvm_1.5.4beta 4 .. (its online btw)
thanks for the fast confirmation

yumeyao · Post by **yumeyao** » Sat Sep 13, 2008 9:03 pm

yeah i saw 1.54 b4 out, it has a little issue: txtsetup_flags(see its changelog for detail). this section is not intended to be used like that(see my post in integrator 1.54 beta topic).
personally i use kal's 1.54 b3 mod which fixes the unicode issue.

kal · Post by **kal** » Sat Sep 13, 2008 9:08 pm

@yumeyao : You can use beta4, it includes my fixes about unicode encoding

Siginet · Post by **Siginet** » Sat Sep 13, 2008 9:10 pm

@Enu_user... the integrator allready automatically does that. Is it not working? It has automatically done that for a while now.

yumeyao · Post by **yumeyao** » Sat Sep 13, 2008 9:10 pm

yeah but it contains the issue i talked about at the same time...

ENU_user · Post by **ENU_user** » Sat Sep 13, 2008 9:18 pm

EDit:i take it back the new beta works just fine

I was probably unaware exactly of the cause that allowed that to happen ...

i retested it all and its fine. +

it should work great for all (so i believe...) so go test it now

Siginet · Post by **Siginet** » Sat Sep 13, 2008 9:42 pm

None of the betas have any code edited for the drivercab_move section. So I don't see why it would be different. I don't have time now to look into it but I will.

@yumeyao I replyed to you in the beta thread.

Post by **RyanVM** » Sat Sep 13, 2008 9:55 pm

garson wrote:Can I integrate this over 1.0.0a?

Yes, that should work fine.

garson · Post by **garson** » Sun Sep 14, 2008 12:03 pm

RyanVM wrote:
garson wrote:Can I integrate this over 1.0.0a?
Yes, that should work fine.

Thank you very much.

I have SP3 with many addons integrated and some tweaks, i don't want to do all over again.

kal · Post by **kal** » Sun Sep 14, 2008 1:20 pm

Hi RyanVM, I have two questions about your latest Update Pack, if you don't mind

Where does this registry entrie come from (KB953323), it's not part of update_SP3QFE.inf :
Code: Select all
```
HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer","HonorAutoRunSetting",0x10001,1
```
KB951764 doesn't specifie to set the key below, and applies only to Windows Server 2008 :
Code: Select all
```
;Required for KB951764
hivesys.inf|"TDI",\|"TDI",\<NEXT>        "FirewallGroup",\|1
```

TIA and cheers

Kal

Post by **RyanVM** » Sun Sep 14, 2008 7:19 pm

kal wrote:Hi RyanVM, I have two questions about your latest Update Pack, if you don't mind
Where does this registry entrie come from (KB953323), it's not part of update_SP3QFE.inf :
Code: Select all
HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer","HonorAutoRunSetting",0x10001,1
KB951764 doesn't specifie to set the key below, and applies only to Windows Server 2008 :
Code: Select all
;Required for KB951764
hivesys.inf|"TDI",\|"TDI",\<NEXT>        "FirewallGroup",\|1
TIA and cheers
Kal

You know, I do have PM...

1.) It's from an earlier hotfix that got superseded. Feel free to go through the changelogs to figure out which one.
2.) That was a typo on my part. It's fixed now. That entry applies to KB951624.

code65536 · Post by **code65536** » Sun Sep 14, 2008 7:20 pm

Mid-air collision. *deletes*

kal · Post by **kal** » Sun Sep 14, 2008 7:42 pm

Thanks RyanVM. Next time, I will PM you

Kal

wireman121 · Post by **wireman121** » Mon Sep 15, 2008 10:00 am

I notice the following updates are missing, is there a plan to integrate them in the future, or should I add the manually?

KB955305 Silverlight
KB940157 Windows Search 4.0
KB954154 Security Update

Other than that, it worked great!

Post by **5eraph** » Mon Sep 15, 2008 10:32 am

Silverlight and Windows Search aren't overwhelmingly popular, so they're left out intentionally. KB954154 is specific to WMP11, which is not included in the update pack.

wireman121 · Post by **wireman121** » Mon Sep 15, 2008 11:18 am

Cool. Thanks for the quick response!

wireman121 · Post by **wireman121** » Mon Sep 15, 2008 8:34 pm

I am also getting a KB898461 update when I first go to the microsoft update page, about updating the MS Update components - should this be included?

yumeyao · Post by **yumeyao** » Mon Sep 15, 2008 8:42 pm

so wireman, are you NOT using an english os?

wireman121 · Post by **wireman121** » Tue Sep 16, 2008 3:30 am

I am using english OS.
Have XP slipstreamed with SP3...

yumeyao · Post by **yumeyao** » Tue Sep 16, 2008 6:39 am

en-us?
install kb898461 manually then go to c:\windows\system32\PreInstall\WinSE, tell us what are listed there.

amburi · Post by **amburi** » Wed Sep 17, 2008 4:33 am

Thanks for the update.

wireman121 · Post by **wireman121** » Wed Sep 17, 2008 9:47 am

A wxp_x86_0409_v1 folder