Addons All dotNet Frameworks NL (2014-02)

[jaynbe]

Microsoft dotNET Frameworks Addons

Credits: YumeYao, strel, roguespear and user_hidden:
"administrative offline msi" http://www.ryanvm.net/forum/viewtopic.php?t=7525


SVCPACK Addon dotNet Framework 1.1SP1 + 3.5SP1 Family NL includes:

dotNet Framework NLD 1.1SP1 + 2.0SP2 + 3.0SP2 + 3.5SP1 + Langpacks
MS Visual C++ ATL 2005SP1, 2008SP1 and 2010SP1
XPS Writer update (newest version KB971276-v3)
optional Framework assistant for Firefox (KB963707)
waitnet.exe for ngen.exe optimalizing routines
WebClient Service optimised for systemlogon.


Multimode installer switches (in entries_ini):
default silent install without Firefox assistant
For passive install change "-qn" to "-qb"
Without dotNet 1.1 change "-ai" to "-ai1"
For Firefox assistant delete "-nf" switch
RunOnceEx full install with " -gm2 -ai2"
RunOnceEx (no dotNet 1.1) " -gm2 -ai3"


Microsoft.Net_1.1SP1+3.5SP1_NL_AddOn_20140212.cab

MD5: EACFA88DC802EFEDE2EE1A8D7B33FA12
Size: 46,76 MB
Url.: http://www.sendspace.com/file/99c95z



Microsoft.Net All Frameworks in one (AIO)

Same addon as above with additional dotNet 4.0 Full.
Same content for dotNet 1.1 + 3.5 and same switches.
waitnet4.exe for ngen4.exe optimalizing routines.


Microsoft.Net_Framework.All_NL_AddOn_20140212.cab

MD5: 1D5417C9B9C72AD525927F8195E71F95
Size: 70,62 MB
Url.: http://www.sendspace.com/file/1hl9pk


TRUE Addon Microsoft Legacy Runtimes

Contains: VC1, VB1-4 and VC7.1 runtimes
Native in XP: VB5-VB6 and VC2-VC6

Win32_Legacy_VB+VC_Rnt_3.0_AddOn.7z

Size: 2,30 MB
MD5: 51625D3AFFE8D193B6E870D035DC3477
Url: http://ge.tt/api/1/files/3VpScIb/0/blob?download

[Babyboy]

Hé...dank je jaynbe.
Dit ziet er goed uit.

Hey... thank you jaynbe.
This looks good.

don't know if you are Dutch ore English so in both thx.

bye

[sandertju]

Heb deze net getest, en er zijn GEEN updates meer.
Heel erg bedankt.

Just tested this, and there are NO updates for Framework.
Thanks very much.

Groeten/Greetings,

Sander

[windoos]

SVCPACK Addon dotNet Framework 3.5SP1 Family NL

Kun je deze versie aanvullen met dotNet 1.1 en dit pack silent maken.
Nu verschijnen er allemaal popups.
En dat wil je tijdens een install natuurlijk niet.

Alvast bedankt.

Siebe B.

[Babyboy]

SVCPACK Addon dotNet Framework 3.5SP1 Family NL

dit pack silent maken.
Nu verschijnen er allemaal popups.
En dat wil je tijdens een install natuurlijk niet.

Alvast bedankt.

Siebe B.

Staat er wel bij:
For silent install change "-qb" to "-qn" in entries_ini

[B-Boy]

Die ini aanpassen is het probleem niet, maar hoe maak ik weer die cab file?
MS had ooit een tooltje makecab.exe maar die krijg ik niet meer te pakken.
Iemand?

[Babyboy]

Die ini aanpassen is het probleem niet, maar hoe maak ik weer die cab file?
MS had ooit een tooltje makecab.exe maar die krijg ik niet meer te pakken.
Iemand?

Gebruik 7zip.
Dat werkt ook.je hebt dan geen Cab bestand.
Maar 7z bestand.maar als het goed is werkt dat ook.

http://www.7-zip.org/download.html

[B-Boy]

Die ini aanpassen is het probleem niet, maar hoe maak ik weer die cab file?
MS had ooit een tooltje makecab.exe maar die krijg ik niet meer te pakken.
Iemand?

Gebruik 7zip.
Dat werkt ook.je hebt dan geen Cab bestand.
Maar 7z bestand.maar als het goed is werkt dat ook.

http://www.7-zip.org/download.html

Okay bedankt voor de info. 7-zip heb ik, maar desalniettemin bedankt voor de downloadlink

[Babyboy]

yo.

Tested as silent installer in WPI. and works good.
No updates more.

Thx

[jaynbe]

Default "Silent" install for v.20100729

Added an addon for VC10 Runtimes (silent)
VC8 & VC9 Full included in dotNet3.5SP1 addon.

[B-Boy]

Thanx jaynbe.

There is an optional Framework SP1 update (from 2004) visible in the list, after visiting the WU site.
Can you confirm that?

Installing it results in an Framework security update.

[jaynbe]

Thanx jaynbe.

There is an optional Framework SP1 update (from 2004) visible in the list, after visiting the WU site.
Can you confirm that?

Installing it results in an Framework security update.

Is the older dotNet Framework 1.1SP1 (not included in Family3.5 pack)
Normally it is no longer usefull, except for Mediacenter 2005.

[B-Boy]

Okay mate. I'll skip this update.
Thanx for your reply.

[jaynbe]

Added Addon dotNet Framework 1.1 SP1 (Silent)

If for some reason you want dotNet 1.1SP1 ( MCE2005 needs it)

If both Framework addons are integrated, dNet1.1 comes last!

[Babyboy]

Added Addon dotNet Framework 1.1 SP1 (Silent)

Thx jaynbe.

[B-Boy]

Also thanx!

[Stefhan]

Das een mooie compacte .net addon.

1 dingetje mist er nog, das namelijk het probleem dat de webclient service niet wil starten als je .net framework installeert als svcpack (T13).
Een freeze tijdens het opstarten van het systeem kan een gevolg zijn.

Deze regel in je install script schakelt de service uit:

Code: Select all

REG ADD HKLM\SYSTEM\CurrentControlSet\Services\WebClient /v Start /t REG_DWORD /d 3 /f

[B-Boy]

Hoi Stefhan,

Fijn dat je meeleest. Hoe lossen we dit op?

[jaynbe]

@Stefhan

The original English version was made by yumeyao about one year ago and had several updates.
I made from the beginning French versions (ROE and T-13)
T-13 behavior was optimized in first versions; no logon freeze reported for both.
The webclient service .reg will be tested for next version.

English: http://www.ryanvm.net/forum/viewtopic.php?t=7696
French: http://www.forum-unattend.fr/phpBB3/vie ... f=10&t=279

[yumeyao]

I'll test it too. I suppose that some specific network environment makes the logon freeze. so can you suggest us about it?

[Stefhan]

The 1 minute 'freeze' is probable hardware specific.
It seems like the problem only happens during 1st logon when the webclient isn't able to start, after a restart everything is fine.
So no need to set the webclient service to manual.

[windoos]

The 1 minute 'freeze' is probable hardware specific.
It seems like the problem only happens during 1st logon when the webclient isn't able to start, after a restart everything is fine.
So no need to set the webclient service to manual.

----------------------------------------------------------------------
Dit is bij mij niet het geval.
En bij vele pc's die ik installeer ook niet.

Het probleem blijft als de webclient niet is uitgeschakeld tijdens de setup.

De regel die je hebt gegeven heb ik toegevoegd en alles is ok!

Top.

Tnx
Siebe B.

[yumeyao]

so set WebClient to manual starting and then install .NET 3.5, am I correct?
After this, WebClient can be set to Auto again, right?

[jaynbe]

so set WebClient to manual starting and then install .NET 3.5, am I correct?
After this, WebClient can be set to Auto again, right?

Stefhan's .reg rule turns the WebClient service off.
windoos confirms no logon freeze with the WebClient off during setup.
On first logon WebClient service can be set to Auto again.

[sandertju]

Well, how do you set the WebClient service to Auto then?

And what is the WebClient service exactly?

[jaynbe]

And what is the WebClient service exactly?

Enables Windows-based programs to create, access, and modify Internet-based files.
Basically the WebClient service allows programs to access files on the Internet. It does this by extending the networking capability of Windows and allows standard Win32 applications to read, create and write files on Internet file servers by using the established WebDAV protocol. DotNet 3.5 uses this protocol by default.
If this service is stopped, these functions will not be available. If this service is disabled, any services that explicitly depend on it will fail to start.

Microsoft has published a knowledge Base article about the delayed logon issue: http://support.microsoft.com/kb/832161

Well, how do you set the WebClient service to Auto then?

Up to you to decide if you want to change the default settings. You can run the .reg Stefhan supplied with DWORD 2.
Or you can change the status of the service after first logon manually.

[jaynbe]

Microsoft.Net_Family.35SP1_NLD_Addon_20100811.cab

Updated with KB983583 (security hotfix 10 Aug 2010)

[sandertju]

Or you can change the status of the service after first logon manually.

Thanks for the update and all the help, but how do I do that?

[jaynbe]

Howto change service status manually:

In Control panel go2 Computer management; in Services right click WebClient for properties and save manual start.

[Babyboy]

Microsoft.Net_Family.35SP1_NLD_Addon_20100811.cab

Updated with KB983583 (security hotfix 10 Aug 2010)

Thank you jaynbe,It is very much appreciated from this side.

[sandertju]

Hey Jaynbe,

Would it make any difference if I install the .NET by RunOnceEx?
And the default setting for WebClient is Auto right?
Mine says Manual.....

[yumeyao]

I have another question, does the trick need to be done DURING INSTALL regardless whether it's installed at T-13?

[jaynbe]

I have another question, does the trick need to be done DURING INSTALL regardless whether it's installed at T-13?

YumeYao, after digging a bit into the matter I discovered that the .reg does't stop the service, but sets it to
manual startup. It seems that XP systems can live with that; most of them are even not using the WebDAV protocol.

Would it make any difference if I install the .NET by RunOnceEx?
And the default setting for WebClient is Auto right?
Mine says Manual.....

I made the French versions originally in RunOnceEx wich is allways the safest way for an installer like .Net.
But the French addon was made the way YumeYao's installer without VC++Runtimes. You'll need the VC++ runtimes
@ T-13 for some applications that depend on them to install @ T-13 (like CDburnerXP and some other)
Nevertheless the installer will run flawlessly in RunOnce(Ex). That's the way I do aswell.
I ended up making a T-13 version on request of some French users for the obvious ease of integration.

Auto is the default setting for the WebClient in winXP. I'm not suffering any issues with it.
Yours is set manual by the .reg applied by windoos.

[sandertju]

Nooo, my installation is a few years old....no reg rule applied by myself.
So if I install the installer of yours by RunOnce I would'nt have to care about WebClient?

[jaynbe]

Nooo, my installation is a few years old....no reg rule applied by myself.
So if I install the installer of yours by RunOnce I would'nt have to care about WebClient?

No you wouldn't, It can even be run live on a running system to install dotnet.

EDIT: Don't forget the install switches

[sandertju]

GREAT. That's what I'm going to do then.

[yumeyao]

So should I modify the install script in order to set WebClient to manual?

[jaynbe]

So should I modify the install script in order to set WebClient to manual?

That's the way windoos tested and prefers it.
He's free to confirm.

Anyway it has no influence on setup; it only doesn't start the WebClient on logon but by system request.

[Stefhan]

This works great for me:

Code: Select all

REG ADD HKLM\SYSTEM\CurrentControlSet\Services\WebClient /v Start /t REG_DWORD /d 3 /f

REG ADD HKLM\Software\Microsoft\Windows\CurrentVersion\Runonce /v DNFSETUP /t reg_sz /d "REG ADD HKLM\SYSTEM\CurrentControlSet\Services\WebClient /v Start /t REG_DWORD /d 2 /f" /f

disabled during 1st logon and back to automatic at 2nd logon.

[Babyboy]

I don't want you turn to confusion.I did install it inside WPI.
So for me it's no problem.
But I'll leave the last word to windoos.hé is the best men for us.^^

PS:yumeyao also thanx for making this up for us!!!!

[yumeyao]

Hi, Stefhan,
could you help me confirm the followings?

1. Is the fix needed by .NET 2.0 or .NET 3.5? I mean, which releases should I add the fix to.

2. What about turn off WebClient and run the install? The code may looks like:

Code: Select all

NET STOP WebClient
REG ADD HKLM\SYSTEM\CurrentControlSet\Services\WebClient /v Start /t REG_DWORD /d 3 /f
run my install
REG ADD HKLM\SYSTEM\CurrentControlSet\Services\WebClient /v Start /t REG_DWORD /d 2 /f
NET START WebClient

3. Is this fixed needed at T-13 or needed even after Windows Setup, i.e. is this fixed needed in an ROE install?

Thanks in advance. I ask these questions because I consider the current fix has a side effect, it may makes users who run without this issue but need WebClient confused as the service is not started on First Logon.

[dumpydooby]

YumeYao, if you're going to do that, I'd recommend querying the key first, then setting it to manual, then restoring it back to the queried value. Otherwise you might risk interfering with custom registry settings.

[yumeyao]

obviously I'll do like what you said. I've always been using it that way, my .NET install script sets the error reporting's key values in that way. I posted the code because it's simple and easy to understand.

[jaynbe]

YumeYao, if you're going to do that, I'd recommend querying the key first, then setting it to manual, then restoring it back to the queried value. Otherwise you might risk interfering with custom registry settings.

This would actually change nothing at first logon and a potential system freeze remains.
The problem is not related to dotNet install itself.
That's why the posted addon contains the key that sets the WebClient service to manual startup at the
end of dotNet setup. This way the service can be started on system request after logon. (so no freeze)

Code: Select all

REG ADD HKLM\SYSTEM\CurrentControlSet\Services\WebClient /v Start /t REG_DWORD /d 3 /f 

[windoos]

Nou het is er ........

.net framework 4.0 NL en toebehoren.

Groet,
Siebe B.

[jaynbe]

New dotNet 1.1SP1 + 3.5SP1 NL addon posted.

Full silent install @ T-13

Optimised new cmd script and waitnet.exe.
Binairies optimised with dotNet4.0 compatibility.
Cosmethic changes and tweaks.

EDIT: Default install is set to low optimisation. (=fast install)
For full optimisation set switches "-gm2 -ai -qn -fo -nf" in entries.

[sandertju]

1 question: can the addon still be used as an RunOnceEx addon?

Or have do i need to set some other switches or are -ai and -qn enough?

I want the assistant, so i delete the -nf switch.

[jaynbe]

I use "-ai -fo -nf" for default passive RunOnceEx install

If you want real silent you should use"-gm2 -ai -qn" (no FF)
Add "-fo" for full optimisation (takes longer to install)

[sandertju]

So i should use for full silent and firefox assistant:

-gm2 -ai -qn -fo

[jaynbe]

So i should use for full silent and firefox assistant:

-gm2 -ai -qn -fo

This is OK. with full optimizing.

"-gm2 -ai -qn" is faster install with low optimizing