[Updated] XP SP3 Update Pack 02.10-01

redxii · Post by **redxii** » Tue Dec 18, 2007 3:17 am

XP SP3 Update Pack 02.10-01

Credit: UpdatePack is based on the work of the RyanVM UpdatePack. This update pack consists of High Priority updates and a few extra goodies.

Notes

Do not integrate with any other update pack.
If you used nLite to integrate the pack and are having problems, PLEASE read this thread before reporting problems.
Use RVM Integrator for XP Home sources.

Known Issues
setuperr.log reports the following error:

Error:
Setup could not register the OLE Control C:\WINDOWS\system32\blastcln.exe because of the following error:
Unknown returned error 0 (0).

blastcln.exe is made obsolete by the Malicious Software Removal Tool.

Malicious Software Removal Tool is not included but the version key is in there to hide it but does not always work, Windows Update may display it and will probably show a much older version. This is a server-side issue with how MS determines whether or not it's installed.

Download: Siginet Software - Rapidshare
SHA1: 7768daef6f4e0f8ceefd43c28c3c69905f3bf59c
Size: 29.1MB

Changelog:

02.10-01
* Last update evar
- Added KB971468. Replaces KB958687.
- Added KB972270. Replaces KB961371.
- Added KB975560. Replaces KB971633.
- Added KB975713.
- Added KB977165. Replaces KB971486.
- Added KB977914. Replaces KB971557.
- Added KB978037.
- Added KB978207. Replaces KB976325.
- Added KB978251. Replaces KB957097.
- Added KB978262. Replaces KB973525.
- Added KB978706.
- Updated Malicious Software Removal Tool version key to version 3.4 (February 2010).
- Updated Flash player to 10.0.45.2.
12.09-03
- Added KB971513.
12.09-02
- Updated Flash player to 10.0.42.34.
12.09-01
- Added KB955759.
- Added KB970430.
- Added KB971737.
- Added KB973904.
- Added KB974318.
- Added KB974392.
- Added KB976325. Replaces KB974455.
- Updated Malicious Software Removal Tool version key to version 3.2 (December 2009).
11.09-02
- Added KB973687. Replaces KB954459 & KB955069.
- Added KB976098. Replaces KB970653.
- November 2009 Root Certificate update
11.09-01
- Added KB969084. Replaces KB956744.
- Added KB969947. Replaces KB968537.
- Updated Malicious Software Removal Tool version key to version 3.1 (November 2009).

Full changelog @ http://redxii.siginetsoftware.com/changelog.txt

Contents:

http://redxii.siginetsoftware.com/xpsp3upd.html

pawan · Post by **pawan** » Tue Dec 18, 2007 11:31 pm

thanks will this work with new released 3264?

redxii · Post by **redxii** » Tue Dec 18, 2007 11:37 pm

I don't see why not actually. The only files replaced are Flash and Windows Update files, the rest are completely new. The Windows Update files that are installed from Windows are dumped anyway for the 7.0.6000.381 files.

I didn't notice they had posted a new version already.

redxii · Post by **redxii** » Wed Dec 19, 2007 3:59 am

Works on v3264. Nothing needing to fix or update.

redxii · Post by **redxii** » Sat Dec 22, 2007 5:50 am

Updated to 1.5. Added a missing file so Microsoft Update doesn't display the license agreement,

Babyboy · Post by **Babyboy** » Sat Dec 22, 2007 4:14 pm

It's a nice thing that you place kb888111 on this packs,...

if i use it by RyanVM intr... he is in the root of the i386/SVCPACK

But when i use the Driverpacks he kicks kb888111 out of this i386/SVCPACK....

what to do........

THanks,Thanks

redxii · Post by **redxii** » Sat Dec 22, 2007 8:22 pm

Which driver pack?

Babyboy · Post by **Babyboy** » Sun Dec 23, 2007 4:34 am

http://driverpacks.net/DriverPacks/

DriverPacks.net 7.05.2
Sound A 7.12

First this in the logfile:
<PREP> Unslipstreamed KB888111.

Second later this:

<WARN> Could not slipstream KB888111 because Service Pack 1 or 2 isn't slipstreamed!

This is the Warning

mr_smartepants · Post by **mr_smartepants** » Mon Dec 24, 2007 2:07 am

We're working on a new DPBase beta. Added support for sp3 and fixes for the HDAudio issues everyone has been having lately. It's in internal testing ATM, but should become public beta in the new year.

Check the news pagefor updates in the new year.

Babyboy · Post by **Babyboy** » Mon Dec 24, 2007 5:06 am

Yo.. thanks mr_smartepants.

Thats nice,i am waiting for that.

But one small guesten (Vraagje)

When i have install SP3,end i look in to mijn Logbook-systeem.
then there is a error from DCom about [Xpsp2res.dll]

maybe is this Nothing,en is it because its a beta....

I hoop you reed this.Bay

quest221 · Post by **quest221** » Wed Dec 26, 2007 4:39 am

Great Job!
I will test this on VMware Workstation!

redxii · Post by **redxii** » Tue Jan 08, 2008 10:29 am

Updated MRT to version 1.37 (January 2008).

ChiefZeke · Post by **ChiefZeke** » Mon Jan 14, 2008 11:44 pm

Good work - will try it on my XP Home SP3 system.

redxii · Post by **redxii** » Sat Jan 26, 2008 11:31 pm

Tested on v3282 and everything appears to be fine. Nothing to change/fix.

dj75lazer · Post by **dj75lazer** » Wed Jan 30, 2008 11:49 am

I just tested it and i have one problem, not from Update Pack 1.5.1 I suppose.
I slipstreamed (with nlite 1.4.1) SP3 build 3282 over a clean SP2 and then I try to add WMP11 (with WMP11Slipstreamer v0.96), IE7 and your XP SP3 (v3282) Update Pack 1.5.1. When is working to slipstream WMP11 i get an error:
-DirId: "242" is defined more then once in "Txtsetup.sif"-
What can I do to repair or skip this?

redxii · Post by **redxii** » Wed Jan 30, 2008 12:31 pm

Try this new version:
http://red.caek.org/addons/RED_XP_SP3_UpdatePack_1.6.7z
EBE8F64C15AACF377E925D802CE2BF70

I change the directory numbers since I defined 242 and SP3 already has a 242.

dj75lazer · Post by **dj75lazer** » Wed Jan 30, 2008 6:11 pm

Take it, make it, run it, test it.
Work just fine, thx.

Echo_Platoon · Post by **Echo_Platoon** » Sun Feb 03, 2008 3:54 pm

@redxii: I noticed that the INF in your pack doesn't have the AddReg information for KB888111. I then checked the INF from the RyanVM UpdatePack and it did have the AddReg information. Does the AddReg information for KB888111 need to be added to the INF of your pack?

redxii · Post by **redxii** » Sun Feb 03, 2008 5:06 pm

"kbwinxppresp3fix"

It isn't necessary for me to include KB921401 because SP3 already has that hotfix, so in fact you replaced it with a older SP2 version. That's why I didn't include the portcls.sys from KB888111, because SP3 already has a newer version.

I purposely removed the addreg for KB888111. It's unnecessary, unless if you have an HDA sound card driver that insists that that registry entry be present and not the actual drivers, then I suppose I can re-add it.

Echo_Platoon · Post by **Echo_Platoon** » Sun Feb 03, 2008 5:10 pm

After I made my post, I went through SP3 and found out that KB921401 was included. Sorry about that.

Thanks for the information about the AddReg information for KB888111. I would recommend putting in the AddReg information into the INF for those people who have HDA sound card drivers that insist on the Registry entry.

ChiefZeke · Post by **ChiefZeke** » Wed Feb 06, 2008 11:30 pm

XP SP3 RC3 (3300) was released today; 315Mb dowwnlaod.

vmanda · Post by **vmanda** » Thu Feb 07, 2008 9:13 am

do you know the name of the file (kbxxx) and /or a location to downloat XP SP3 RC3 (3300) ?

dj75lazer · Post by **dj75lazer** » Thu Feb 07, 2008 11:33 am

The name is same like always and you can find it all over the net now, just ask google

vmanda · Post by **vmanda** » Thu Feb 07, 2008 3:08 pm

Thanks . solved. The filename is always Windowsxp-kb936929-sp3-x86-enu.exe for all RCs.
For SP3 RC3 3300 version reported 5.1.2600.3300 (xpsp.080125-2028)

Echo_Platoon · Post by **Echo_Platoon** » Mon Feb 11, 2008 12:22 pm

I came across an issue with a fresh install of XP with SP3 slipstreamed. It is described on the site below:

Code: Select all

http://www.mydigitallife.info/2008/01/28/ie6-stops-responding-in-windows-xp-with-sp2-or-sp3-due-to-urlmondll/

I then downloaded the hotfix, KB946627, and installed it but got a message saying that a newer service pack is already installed. Since this update is just a registry edit, I was easily able to add it to the INF of this pack.

Here is what I added to the INF to fix the issue:

Code: Select all

[KB946627.AddReg]
HKLM,"SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_PROTECT_DECOMPRESSION_FILTER_FROM_ABORT_KB942367","*",0x10001,1

Also, I added "KB946627.AddReg" (without the quotes) to the AddReg line under the "[XPSP3Upd]" section, so that the "[KB946627.AddReg]" section will be executed during install.

I tested this out on a fresh install and it works.

redxii · Post by **redxii** » Mon Feb 11, 2008 12:56 pm

I will try it.

Seriously, they need to fix that already. It has been crashing since at least build 3180. If it kills them to insert that one simple addreg line directly into hivesft.inf then they aren't likely to include it.

Normally I always install IE7 (via archived installer), and IE7 doesn't have that problem.

Echo_Platoon · Post by **Echo_Platoon** » Mon Feb 11, 2008 2:19 pm

In my opinion, Microsoft should fix that if they plan on putting out Windows XP with SP3 to retailers without integrating IE7. I'm not sure if they plan to integrate IE7 or not when they do ship out to retailers.

redxii · Post by **redxii** » Tue Feb 12, 2008 10:24 am

Added IE6 crash workaround (KB946627) and Updated Malicious Software Removal Tool to version 1.38 (February 2008)

SpeedEuphoria · Post by **SpeedEuphoria** » Wed Feb 13, 2008 10:22 am

Hey thanks, I've been messing with it, and seems ok, just needed that Feb update.

I'll DL again and try

ChiefZeke · Post by **ChiefZeke** » Thu Feb 14, 2008 12:05 am

Echo_Platoon wrote:In my opinion, Microsoft should fix that if they plan on putting out Windows XP with SP3 to retailers without integrating IE7. I'm not sure if they plan to integrate IE7 or not when they do ship out to retailers.

The word in the SP3 forum is neither IE7 nor WMP11 will be included in SP3.
http://forums.microsoft.com/TechNet/Sho ... &SiteID=17

armond · Post by **armond** » Wed Feb 20, 2008 1:17 am

Build 3311 via Windows Update?
http://www.microsoft.com/downloads/deta ... layLang=en

redxii · Post by **redxii** » Wed Feb 20, 2008 2:12 am

Ya, it's 3311. Can't test without a standalone installer though.

Stimpy · Post by **Stimpy** » Wed Feb 20, 2008 4:19 am

As MS are offering this to the public, and also without WGA checks, can some bright soul post a link to the actual .exe? I'm running vista, so I cant go in to the Windows Update logs and get the link to the .exe for myself.

Post by **5eraph** » Wed Feb 20, 2008 8:25 am

I believe this should work: Windows XP SP3 Release Candidate 2.exe

I thought there would be more to it than a CMD file. Running Xp x64 here, so no luck for me either. I'll see if I have any luck in VM.

Stimpy · Post by **Stimpy** » Wed Feb 20, 2008 8:34 am

It's strange the way MS is doing this. By a registry hack, to make Windows Update show the file. Why not just post a link to the full .exe?

I also guess that Build 3311 is now the official RC2 of SP3.

vmanda · Post by **vmanda** » Wed Feb 20, 2008 8:41 am

Anywone has a link to standalone sp3.3311 pack ?
The registry hack not work on machines runing previous releases of sp3.
I tried that.

Stimpy · Post by **Stimpy** » Wed Feb 20, 2008 8:43 am

vmanda, I take it that you haven't been reading the last couple of posts then

Post by **5eraph** » Wed Feb 20, 2008 8:49 am

No luck finding the log file you mention. Where would it be located? Filename?

vmanda · Post by **vmanda** » Wed Feb 20, 2008 8:53 am

only japanese version

windowsxp-kb936929-sp3-x86-jpn_683ab4e349c40edb8f6750d3b87bd69218641ed1.exe

http://d.hatena.ne.jp/makoto_2006jp/mob ... e=20080220

download from here

Post by **5eraph** » Wed Feb 20, 2008 8:57 am

Thanks, vmanda.

Stimpy · Post by **Stimpy** » Wed Feb 20, 2008 8:58 am

Nice work vmanda, i hope you can find the English version. I'm trying to remember the name of the file that Windows Update makes, that contains all the file info for the various updates.

techtype · Post by **techtype** » Wed Feb 20, 2008 9:14 am

Stimpy wrote:Nice work vmanda, i hope you can find the English version. I'm trying to remember the name of the file that Windows Update makes, that contains all the file info for the various updates.

Try this:
http://download.microsoft.com/download/ ... 86-enu.exe

vmanda · Post by **vmanda** » Wed Feb 20, 2008 9:39 am

the link is good but ... is from sp3.3264

vmanda · Post by **vmanda** » Wed Feb 20, 2008 9:48 am

Take a look at that
.../download/a/e/4/ae43e777-d69b-4b96-b554-d1a2a0f40fac/windowsxp-kb936929-sp3-x86-enu.exe

techtype · Post by **techtype** » Wed Feb 20, 2008 10:05 am

vmanda wrote:Take a look at that
.../download/a/e/4/ae43e777-d69b-4b96-b554-d1a2a0f40fac/windowsxp-kb936929-sp3-x86-enu.exe

I'm downloading it to check against my copy of 3300 that I got as a beta tester. In the meantime try this:
http://www.softpedia.com/progDownload/W ... 90001.html

Edit: You are correct, it's not the same as the copy that I got as a beta tester.

Stimpy · Post by **Stimpy** » Wed Feb 20, 2008 10:35 am

The extracted kernel.dll from your link techtype, is version 3264. So its defiantly not the 3311 build.

techtype · Post by **techtype** » Wed Feb 20, 2008 10:42 am

Stimpy wrote:The extracted kernel.dll from your link techtype, is version 3264. So its defiantly not the 3311 build.

Even as a beta tester, we did not get a download of 3311. We had to get 3311 from Windows Update.

armond · Post by **armond** » Wed Feb 20, 2008 11:27 am

techtype wrote:
Stimpy wrote:The extracted kernel.dll from your link techtype, is version 3264. So its defiantly not the 3311 build.
Even as a beta tester, we did not get a download of 3311. We had to get 3311 from Windows Update.

No! Very bad news for today!

vmanda · Post by **vmanda** » Wed Feb 20, 2008 1:52 pm

German ( deutsch ) version.
here

But english stil not found.

DizzyDen · Post by **DizzyDen** » Wed Feb 20, 2008 4:59 pm

Well, I performed the update, I saved the downloaded files into a Windows XP SP3 RC2 (3311) folder prior to allowing it to really install it, everything is fine EXCEPT.... i haven't been able to get it to allow for an integrated install yet... keeps tellin me that it must contain an i386 folder, still sorting through all of that nonsense....

but, i can compress and upload the sp3 3311 files so you could implement the update, and if i get the integrated install fixed will let ya know

UPDATE:
OK, I have been playing with this integrate situation, currently the only thing I have had work (as far as getting it to slipstream, still making disc and testing) is......

I took complete RC1 3300 build KB file, extracted it, and i copied the files/folders from the extracted 3311 file into it to match the original... ie copy the contents of the root from this 3311 into the 1386 of the 3300 and all subfolders into corresponding folders.

At least it reports it integrated correctly, will let ya know after installing