Onepiece XP Post-SP3 AIO Update Pack FINAL

Windows XP Professional Update Pack discussion.
Post Reply
User avatar
PJAmerica
Posts: 124
Joined: Thu Oct 03, 2013 12:05 pm

Post by PJAmerica » Fri Oct 18, 2013 3:12 am

nonno fabio wrote:The longest time requested to full Dotnet setup we have seen has been about 30 minutes on very low-end HW.
With shift + f11 you can verify what is in progress and shift + f10, if you type taskmgr.exe, will show you processes being executed.
If you want to be sure, integrate again updatepack with nothing else in a clean source using RVMi and retry.
I already did that my friend. It took roughly an hour the last time which is better than before but still slow going. That's life though. It's an old Dell Dimension 3000, Pentium 4, 2GB RAM, 160GB Hard Drive. It's pretty fast for an old computer from 2005. This is just one of those things. I had to check if there was something I was missing. That turned out to be patience on my part. Just seemed really long and it had me concerned.

User avatar
PJAmerica
Posts: 124
Joined: Thu Oct 03, 2013 12:05 pm

Post by PJAmerica » Fri Nov 01, 2013 8:48 pm

I just wanted to thank everyone involved in making this update pack. It is the first time I have ever NOT had to add additional updates after a clean install. It was a one stop shop for everything I needed under the hood. Thank you so much.

cosy
Posts: 278
Joined: Tue Apr 18, 2006 11:56 pm

Post by cosy » Thu Nov 07, 2013 5:35 pm

sorted it out, sorry

rvdbos
Posts: 1
Joined: Sat Nov 09, 2013 11:05 pm

Post by rvdbos » Sat Nov 09, 2013 11:14 pm

I have xp sp1a cd with OEM CoA product key. I tried to use it as a source in nlite, added sp3 to it, then onepiece, finally boot ISO. It boots ok, all well until it asks me to enter Product Key. I enter what I have on CoA and it fails with "The Product Id you entered is not valid" error. I also tried another OEM (?) key - same error. What did I do wrong? Is the key latched on sp1a cd?

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sun Nov 10, 2013 12:46 am

You slipstreamed sp3 while running vista or win7 didn't you?

Thats a long known no-no

You need to slipstream under a pre vista OS

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Sun Nov 10, 2013 5:09 am

and it's better to integrate SP3 on your source using official commands than third-party apps http://support.microsoft.com/kb/900871
example:

Code: Select all

WindowsXP-KB936929-SP3-x86-ENU.exe -s:c:\XPCD
    ;or
    WindowsXP-KB936929-SP3-x86-ENU.exe /integrate:C:\XPCD
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Wed Nov 13, 2013 4:22 pm

new release (see changelog)
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

bbmak
Posts: 57
Joined: Sat Feb 17, 2007 2:55 pm

Post by bbmak » Sun Nov 17, 2013 1:42 pm

Thank you so much for the update.

cosy
Posts: 278
Joined: Tue Apr 18, 2006 11:56 pm

Post by cosy » Sun Nov 17, 2013 2:00 pm

A big thank you for the update.

User avatar
Acheron
Posts: 389
Joined: Thu Nov 25, 2004 4:05 pm
Location: The Netherlands
Contact:

Post by Acheron » Mon Nov 18, 2013 5:07 am

I have discovered a hotfix not included with OnePiece updatepack.

http://support.microsoft.com/?kbid=2095711

shon3i
Posts: 195
Joined: Thu Oct 19, 2006 1:16 pm

Post by shon3i » Mon Nov 18, 2013 11:54 am

Also KB2862330 showed on WU? any reason ?

User avatar
OnePiece Alb
Posts: 525
Joined: Sat Sep 01, 2007 7:01 pm
Location: Albania
Contact:

Post by OnePiece Alb » Mon Nov 18, 2013 3:33 pm

Acheron wrote:I have discovered a hotfix not included with OnePiece updatepack.

http://support.microsoft.com/?kbid=2095711
Hi Acheron, http://www.ryanvm.net/forum/viewtopic.p ... 165#133165
shon3i wrote:Also KB2862330 showed on WU? any reason ?
Hi shon3i, during all tests never had\seen that problem (I always use VMware Workstation, having said that, I do not want to say something stupid, but I doubt that it concerned only in VirtualBox user), run the "qfecheck.exe /v" and see what happens ??, integrates UpdatePacks in a CD clean with RVMi (Do not run "Optimize System Files" or other, just integrate UpdatePacks) and after doing a test (check MU, not WU), when it enters Nonno Fabio can tell you everything better (will give you an answer more professional)

Ciao.
Last edited by OnePiece Alb on Mon Nov 18, 2013 8:07 pm, edited 2 times in total.
Image Image Image

User avatar
Acheron
Posts: 389
Joined: Thu Nov 25, 2004 4:05 pm
Location: The Netherlands
Contact:

Post by Acheron » Mon Nov 18, 2013 4:40 pm

The information in the hotfix article for KB2095711 does not mention that this update is specifically for Windows Embedded.

Below the article says that the hotfix is for:

Microsoft Windows XP Professional
Microsoft Windows XP Embedded Service Pack 1
Microsoft Windows XP Home Edition

So, Windows XP Home and Professional are supported. The only problem with this update is that it contains a check to allow installation only on Windows XP Embedded. If you look into the installer it contains the Windows XP SP3 files.

I have successfully tested this update on Windows XP SP3 Professional.

User avatar
OnePiece Alb
Posts: 525
Joined: Sat Sep 01, 2007 7:01 pm
Location: Albania
Contact:

Post by OnePiece Alb » Mon Nov 18, 2013 4:50 pm

Does not work in what way
Image

you should never change\Edit the Update.inf (precisely for this reason is a protected file)
Image

however UpdatePacks does not contain any kind of tweaks or otherwise (only integrate update\component in True Mod, never modify any structure of any update or components), Update Pack contains only the official way

Ciao.
Image Image Image

User avatar
Acheron
Posts: 389
Joined: Thu Nov 25, 2004 4:05 pm
Location: The Netherlands
Contact:

Post by Acheron » Mon Nov 18, 2013 6:53 pm

You can use the files from this update without any modifications. The check within the update.inf file is the only thing that prevents direct installation.

Anyway if you don't want to include this update maybe someone can create an addon for it :)

User avatar
OnePiece Alb
Posts: 525
Joined: Sat Sep 01, 2007 7:01 pm
Location: Albania
Contact:

Post by OnePiece Alb » Mon Nov 18, 2013 7:48 pm

Acheron wrote:You can use the files from this update without any Anyway if you don't want to include this update maybe someone can create an addon for it :)
I understand

example, drag the WindowsXP-KB2095711-x86-*.exe in KB2095711.cmd

KB2095711.cmd
CD /D "%~p0"
RD /S /Q "KB2095711"
RD /S /Q "KB2095711_AddOn"
"%~1" -x:"%~dp0\KB2095711" /Q
MD KB2095711_AddOn\SvcPack
COPY "KB2095711\SP3QFE\cryptsvc.dll" "KB2095711_AddOn\cryptsvc.dll" /Y
COPY "KB2095711\update\KB2095711.CAT" "KB2095711_AddOn\SvcPack\KB2095711.CAT" /Y
RD /S /Q "KB2095711"
CD /D "%~p0\KB2095711_AddOn"

>"entries_KB2095711.ini" ECHO ;by OnePiece
>>"entries_KB2095711.ini" ECHO ;#############################################################################################################
>>"entries_KB2095711.ini" ECHO ;This section contains version information to nLite and RyanVM Integrator Entries.ini
>>"entries_KB2095711.ini" ECHO ;# This file contains a list of all necessary entries to add in the various installation
>>"entries_KB2095711.ini" ECHO ;# files of Windows for the integration of KB2095711.
>>"entries_KB2095711.ini" ECHO ;#############################################################################################################
>>"entries_KB2095711.ini" ECHO.
>>"entries_KB2095711.ini" ECHO [general]
>>"entries_KB2095711.ini" ECHO builddate=2013/11/19
>>"entries_KB2095711.ini" ECHO description=A memory leak occurs in Windows XP when you play a Digital Rights Management-enabled video for a long time
>>"entries_KB2095711.ini" ECHO language=English
>>"entries_KB2095711.ini" ECHO ServicePack=SP3
>>"entries_KB2095711.ini" ECHO title=KB2095711
>>"entries_KB2095711.ini" ECHO version=2013
>>"entries_KB2095711.ini" ECHO website=http://support.microsoft.com/kb/2095711
>>"entries_KB2095711.ini" ECHO Windows=XP
>>"entries_KB2095711.ini" ECHO.
>>"entries_KB2095711.ini" ECHO ;This section contains entries that need to go into the [Components] section of the Sysoc.inf file.
>>"entries_KB2095711.ini" ECHO [Sysoc]
>>"entries_KB2095711.ini" ECHO KB2095711=ocgen.dll,OcEntry,KB2095711.inf,HIDE,7
>>"entries_KB2095711.ini" ECHO.
>>"entries_KB2095711.ini" ECHO ;This section contains entries that need to go into the [Files] section of dosnet.inf
>>"entries_KB2095711.ini" ECHO [Dosnet_Files]
>>"entries_KB2095711.ini" ECHO d1,KB2095711.inf
>>"entries_KB2095711.ini" ECHO.
>>"entries_KB2095711.ini" ECHO ;This section contains entries that need to go into the [WinntDirectories] section of txtsetup.sif
>>"entries_KB2095711.ini" ECHO [Txtsetup_Files]
>>"entries_KB2095711.ini" ECHO KB2095711.inf = 100,,,,,,,20,0,0
>>"entries_KB2095711.ini" ECHO.
>>"entries_KB2095711.ini" ECHO ;This section contains a list of files in i386 which should be compressed at the very
>>"entries_KB2095711.ini" ECHO ;beginning of the integration process
>>"entries_KB2095711.ini" ECHO [i386_compress]
>>"entries_KB2095711.ini" ECHO rvmtemp\extracted\KB2095711.inf
>>"entries_KB2095711.ini" ECHO.

>"KB2095711.inf" ECHO ;
>>"KB2095711.inf" ECHO ; KB2095711 INF
>>"KB2095711.inf" ECHO ;
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO [Version]
>>"KB2095711.inf" ECHO signature="$Windows NT$"
>>"KB2095711.inf" ECHO ClassGUID={00000000-0000-0000-0000-000000000000}
>>"KB2095711.inf" ECHO SetupClass=Base
>>"KB2095711.inf" ECHO LayoutFile=layout.inf
>>"KB2095711.inf" ECHO DriverVer=07/01/2001,5.1.2600.5512
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO [Optional Components]
>>"KB2095711.inf" ECHO KB2095711
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO [OPMWXPUP]
>>"KB2095711.inf" ECHO OptionDesc ="KB2095711"
>>"KB2095711.inf" ECHO Tip ="A memory leak occurs in Windows XP when you play a Digital Rights Management-enabled video for a long time"
>>"KB2095711.inf" ECHO Modes = 0,1,2,3
>>"KB2095711.inf" ECHO AddReg = KB2095711.AddReg
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO [KB2095711.AddReg]
>>"KB2095711.inf" ECHO HKLM, "%%UpdateRegKey%%\%%PRODUCT_NAME%%\SP%%SERVICE_PACK_NUMBER%%\KB2095711", "Description", %%REG_SZ%%, "%%LOC_SECURITY_UPDATE%% for %%PRODUCT_NAME%% (KB2095711)"
>>"KB2095711.inf" ECHO HKLM, "%%UpdateRegKey%%\%%PRODUCT_NAME%%\SP%%SERVICE_PACK_NUMBER%%\KB2095711", "InstalledBy", %%REG_SZ%%, "%%NAME%%"
>>"KB2095711.inf" ECHO HKLM, "%%UpdateRegKey%%\%%PRODUCT_NAME%%\SP%%SERVICE_PACK_NUMBER%%\KB2095711", "InstalledDate", %%REG_SZ%%, "%%VERSION%%"
>>"KB2095711.inf" ECHO HKLM, "%%UpdateRegKey%%\%%PRODUCT_NAME%%\SP%%SERVICE_PACK_NUMBER%%\KB2095711", "Type", %%REG_SZ%%, "Update"
>>"KB2095711.inf" ECHO HKLM, "%%UpdateRegKey%%\%%PRODUCT_NAME%%\SP%%SERVICE_PACK_NUMBER%%\KB2095711\Filelist\0", "FileName", %%REG_SZ%%, "cryptsvc.dll"
>>"KB2095711.inf" ECHO HKLM, "%%UpdateRegKey%%\%%PRODUCT_NAME%%\SP%%SERVICE_PACK_NUMBER%%\KB2095711\Filelist\0", "Version", %%REG_SZ%%, "5.1.2600.5988"
>>"KB2095711.inf" ECHO HKLM, "%%UpdateRegKey%%\%%PRODUCT_NAME%%\SP%%SERVICE_PACK_NUMBER%%\KB2095711\Filelist\0", "BuildDate", %%REG_SZ%%, "Wed May 26 07:59:27 2010"
>>"KB2095711.inf" ECHO HKLM, "%%UpdateRegKey%%\%%PRODUCT_NAME%%\SP%%SERVICE_PACK_NUMBER%%\KB2095711\Filelist\0", "BuildCheckSum", %%REG_SZ%%, "f5f6"
>>"KB2095711.inf" ECHO HKLM, "%%UpdateRegKey%%\%%PRODUCT_NAME%%\SP%%SERVICE_PACK_NUMBER%%\KB2095711\Filelist\0", "Location", %%REG_SZ%%, "%%11%%"
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711", "Backup Dir", %%REG_SZ%%, ""
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711", "Comments", %%REG_SZ%%, "%%LOC_SECURITY_UPDATE%% for %%PRODUCT_NAME%% (KB2095711)"
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711", "Fix Description", %%REG_SZ%%, "%%LOC_SECURITY_UPDATE%% for %%PRODUCT_NAME%% (KB2095711)"
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711", "Installed", %%REG_DWORD%%, "1"
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711", "Installed By", %%REG_SZ%%, "%%NAME%%"
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711", "Installed On", %%REG_SZ%%, "%%VERSION%%"
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711", "Service Pack", %%REG_DWORD%%, %%SERVICE_PACK_NUMBER%%
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711", "Valid", %%REG_DWORD%%, "1"
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711\File 1", "Flags", %%REG_SZ%%, ""
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711\File 1", "New File", %%REG_SZ%%, ""
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711\File 1", "New Link Date", %%REG_SZ%%, ""
>>"KB2095711.inf" ECHO HKLM, "%%KEY_HOTFIX%%\KB2095711\File 1", "Old Link Date", %%REG_SZ%%, ""
>>"KB2095711.inf" ECHO HKLM,"Software\Microsoft\Cryptography\CatalogDB", "ConnectionTerminate", %%REG_DWORD%%, 0x1
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO [Strings]
>>"KB2095711.inf" ECHO NAME = "OnePiece"
>>"KB2095711.inf" ECHO VERSION = "2013"
>>"KB2095711.inf" ECHO UpdateRegKey = "SOFTWARE\Microsoft\Updates"
>>"KB2095711.inf" ECHO SERVICE_PACK_NUMBER = "4"
>>"KB2095711.inf" ECHO PRODUCT_NAME = "Windows XP"
>>"KB2095711.inf" ECHO KEY_HOTFIX = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\HotFix"
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO REG_EXPAND_SZ=0x00020000
>>"KB2095711.inf" ECHO REG_SZ=0x00000000
>>"KB2095711.inf" ECHO REG_DWORD=0x00010001
>>"KB2095711.inf" ECHO REG_BINARY=0x00000001
>>"KB2095711.inf" ECHO REG_MULTI_SZ = 0x00010000
>>"KB2095711.inf" ECHO REG_DWORD_NOCLOBBER = 0x00010003
>>"KB2095711.inf" ECHO REG_SZ_NOCLOBBER = 0x00000002
>>"KB2095711.inf" ECHO REG_BINARY_NOCLOBBER = 0x00000003
>>"KB2095711.inf" ECHO REG_MULTI_SZ_APPEND = 0x0001000A
>>"KB2095711.inf" ECHO REG_MULTI_SZ_NOCLOBBER = 0x00010002
>>"KB2095711.inf" ECHO REG_MULTI_SZ_DELVAL = 0x00010006
>>"KB2095711.inf" ECHO REG_ADDREG_APPEND = 0x00010008
>>"KB2095711.inf" ECHO REG_EXPAND_SZ_NOCLOBBER = 0x00020002
>>"KB2095711.inf" ECHO REG_NONE = 0x00020001
>>"KB2095711.inf" ECHO VALUE_NOT_SET = 0x00000010
>>"KB2095711.inf" ECHO VALUE_NOT_SET_NOCLOBBER = 0x00000012
>>"KB2095711.inf" ECHO.
>>"KB2095711.inf" ECHO ;;;;;;;--------------------------------------------
>>"KB2095711.inf" ECHO ;-- Only localize strings below this line
>>"KB2095711.inf" ECHO ;;;;;;--------------------------------------------
>>"KB2095711.inf" ECHO LOC_UPDATE="Update"
>>"KB2095711.inf" ECHO LOC_CRITICALUPDATE="Critical Update"
>>"KB2095711.inf" ECHO LOC_HOTFIX="Hotfix"
>>"KB2095711.inf" ECHO LOC_SECURITY_UPDATE="Security Update"
>>"KB2095711.inf" ECHO.

>"KB2095711.dif" ECHO .option explicit
>>"KB2095711.dif" ECHO .set DiskDirectoryTemplate=.
>>"KB2095711.dif" ECHO .set CabinetNameTemplate="..\KB2095711_AddOn.cab"
>>"KB2095711.dif" ECHO .set SourceDir=.\
>>"KB2095711.dif" ECHO .set RptFileName=nul
>>"KB2095711.dif" ECHO .set InfFileName=nul
>>"KB2095711.dif" ECHO .set MaxDiskSize=999948288
>>"KB2095711.dif" ECHO .set Compress=on
>>"KB2095711.dif" ECHO .set Cabinet=on
>>"KB2095711.dif" ECHO .set CompressionType=LZX
>>"KB2095711.dif" ECHO .set CompressionMemory=21
>>"KB2095711.dif" ECHO.
>>"KB2095711.dif" ECHO "entries_KB2095711.ini"
>>"KB2095711.dif" ECHO "KB2095711.inf"
>>"KB2095711.dif" ECHO .Set DestinationDir="SvcPack"
>>"KB2095711.dif" ECHO "SvcPack\KB2095711.CAT"
>>"KB2095711.dif" ECHO.
DEL /F/Q "%~p0\KB2095711_AddOn.cab"
"%SystemRoot%\System32\MAKECAB.exe" /f "KB2095711.dif"

CD /D "%~p0"
RD /S /Q "KB2095711_AddOn"
Exit
Ciao.
Last edited by OnePiece Alb on Tue Nov 19, 2013 3:31 am, edited 1 time in total.
Image Image Image

User avatar
armond
Posts: 263
Joined: Tue Sep 13, 2005 11:43 am
Location: Glendale, CA USA

Post by armond » Tue Nov 19, 2013 1:02 am

Hello,
So, running Optimize System Files after update pack integration may cause a problem?
What I did: Integrated the latest update pack into a fresh XPSP3 CD, removed Windows Search via its removal addon, and then optimized system files, all in 3 separate RVM Integrator sessions.
So it should be OK?
Thanks so much.

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Tue Nov 19, 2013 8:01 am

We have no evidence that Optimize System Files causes issues and we never investigate about that.
But some users reported problems with their integration, solved by simply unchecking Optimize System Files option.
So your method should be correct. You could build an .iso at the end of session and test it on a VM to be sure there's no problems due to updatepack itself
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

User avatar
armond
Posts: 263
Joined: Tue Sep 13, 2005 11:43 am
Location: Glendale, CA USA

Post by armond » Tue Nov 19, 2013 10:33 am

OK Got it. Thanks so much.

viggen66
Posts: 14
Joined: Wed Oct 09, 2013 6:12 am

Post by viggen66 » Mon Nov 25, 2013 2:50 pm

PPl, salvation comes along, as a company is about to give non official support to XP after April 2014

http://www.zdnet.com/windows-xp-post-ap ... 000020291/

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Wed Dec 11, 2013 4:43 pm

new release (see changelog)
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

dudeuk
Posts: 184
Joined: Wed Aug 11, 2010 8:34 am

Post by dudeuk » Sat Dec 14, 2013 12:23 pm

1 update to download shows in High-priority updates

Security Update for Windows XP and Windows Server 2003 (KB2917500)
http://www.microsoft.com/en-us/download ... x?id=41542

could this be added to the iso folder easy like with nlite or some thing
or could it be added to the update pack some how

thanks..

User avatar
OnePiece Alb
Posts: 525
Joined: Sat Sep 01, 2007 7:01 pm
Location: Albania
Contact:

Post by OnePiece Alb » Sat Dec 14, 2013 12:27 pm

Hi dudeuk, just extract the Update Pack and replace rvkroots.exe inside and archive it again http://www.ryanvm.net/forum/viewtopic.p ... 219#135219 or after the integration of the Update Pack, go to the CD\I386 folder and delete the rvkroots.ex_ and copy the new rvkroots.exe

Ciao.
Image Image Image

dudeuk
Posts: 184
Joined: Wed Aug 11, 2010 8:34 am

Post by dudeuk » Mon Dec 16, 2013 4:01 pm

many thanks.. that worked great..

Ultraform
Posts: 43
Joined: Mon Oct 29, 2012 11:17 pm

Post by Ultraform » Sun Dec 22, 2013 7:40 am

Omg Thx for the
Swedish Onepiece XP Post-SP3 AIO Update Pack v7.5.0

I just wanted to start make my own sve pack and saw this thx again. <3

User avatar
PJAmerica
Posts: 124
Joined: Thu Oct 03, 2013 12:05 pm

Post by PJAmerica » Mon Dec 23, 2013 2:22 am

I was wondering if anyone could tell me how I could get this to fit on a single cd? It's just a fresh SP3 with the update pack and I removed XP Tour, Instant Messenger and MSN. Any advice would be greatly appreciated. :D

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Mon Dec 23, 2013 2:40 am

Ultraform wrote:Omg Thx for the
Swedish Onepiece XP Post-SP3 AIO Update Pack v7.5.0

I just wanted to start make my own sve pack and saw this thx again. <3
You're welcome. Try it on a VM before install on real one.
It should be OK as always but local updatepacks haven't tested one by one this time
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

User avatar
OnePiece Alb
Posts: 525
Joined: Sat Sep 01, 2007 7:01 pm
Location: Albania
Contact:

Post by OnePiece Alb » Mon Dec 23, 2013 6:31 am

PJAmerica wrote:I was wondering if anyone could tell me how I could get this to fit on a single cd? It's just a fresh SP3 with the update pack and I removed XP Tour, Instant Messenger and MSN. Any advice would be greatly appreciated. :D
Kelsenellenelvian wrote:You are supposed to MANUALLY remove the extra, unnecessary folders from it....

DOCS
DOTNETFX
SUPPORT
VALUEADD
I386\Lang

This frees up 159 megs. Wish to manually save more?

WIN9XUPG
WIN9XMIG

This frees up another 36.6 megs. All together that saves you @ 200 megs...
http://www.ryanvm.net/forum/viewtopic.p ... 050#106050

Ciao.
Image Image Image

User avatar
PJAmerica
Posts: 124
Joined: Thu Oct 03, 2013 12:05 pm

Post by PJAmerica » Mon Dec 23, 2013 8:57 pm

OnePiece Alb wrote:
PJAmerica wrote:I was wondering if anyone could tell me how I could get this to fit on a single cd? It's just a fresh SP3 with the update pack and I removed XP Tour, Instant Messenger and MSN. Any advice would be greatly appreciated. :D
Kelsenellenelvian wrote:You are supposed to MANUALLY remove the extra, unnecessary folders from it....

DOCS
DOTNETFX
SUPPORT
VALUEADD
I386\Lang

This frees up 159 megs. Wish to manually save more?

WIN9XUPG
WIN9XMIG

This frees up another 36.6 megs. All together that saves you @ 200 megs...
http://www.ryanvm.net/forum/viewtopic.p ... 050#106050

Ciao.
Hi OnePiece Alb,

I had actually read that but there was some debate as to whether that was a wise choice. So you say that it won't hurt anything If I do that then? What would you advise? I really want to use your Update Pack over anyone else but I need it on CD.

Thanks, PJA

spider
Posts: 64
Joined: Sat Feb 23, 2008 1:06 am

Post by spider » Tue Dec 24, 2013 2:18 am

PjAmerica, unless you are using other languages as well then you would need the i386/lang folder, if not then delete. Deleting these folders is fine as most of it is outdated and redundant, also they do not get installed in the default process.

Here's a thread you could read about someone in a similar situation:
http://www.ryanvm.net/forum/viewtopic.php?t=9554

User avatar
OnePiece Alb
Posts: 525
Joined: Sat Sep 01, 2007 7:01 pm
Location: Albania
Contact:

Post by OnePiece Alb » Tue Dec 24, 2013 6:19 am

Hi PjAmerica, Thank you for your consideration :wink:, but Kelsenellenelvian has more experience than me, is older than me in this environment , that's why i quoted the Kelsenellenelvian :wink:, however about the I386\Lang & WIN9XUPG & WIN9XMIG are optional, instead DOCS & DOTNETFX & SUPPORT & VALUEADD (is safe) you can delete them without fear (also CMPNENTS because Netfx10 is obsolete and other files are relating to the TABLETPC ect ect, how to say in 99.9% of cases are never used), however i personally prefer to never touch\edit the XP CD and burn all in a DVD :wink:

Ciao.
Image Image Image

mark strelecki
Posts: 48
Joined: Tue Jun 10, 2008 11:05 am
Location: Atlanta GA USA

Post by mark strelecki » Tue Dec 24, 2013 9:14 pm

Just wanted to say this DEC 2013 One Piece pack works great, and it really makes XP a fully-powered OS with the DotNet Frameworks and everything else.

Thanks very much for your talented creativity as well as your gracious contribution to all of us in the XP community. Your work is much appreciated and respected.

Merry Christmas from Atlanta.

MARK STRELECKI
Atlanta, GA. USA

User avatar
PJAmerica
Posts: 124
Joined: Thu Oct 03, 2013 12:05 pm

Post by PJAmerica » Tue Dec 24, 2013 9:37 pm

Thank you to everyone for your time and responses to my questions. I very much appreciate it. Keep up the great work. :D

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Wed Dec 25, 2013 3:58 am

Merry Christmas to everybody from Nonno Fabio and OnePiece!
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

User avatar
bphlpt
Posts: 1367
Joined: Sat Apr 19, 2008 1:11 am

Post by bphlpt » Wed Dec 25, 2013 4:25 am

I hope everyone has a safe and very Happy Holidays!

Cheers and Regards

mukeshkumar
Posts: 4
Joined: Sat Dec 14, 2013 7:48 am

Post by mukeshkumar » Sat Dec 28, 2013 7:45 am

I used the latest onepiece update pack for december 2013(hash verified), used an original xp iso(hash verified), ryanvm integrator 1.6.1b2.1(hash verified) and all the official driverpacks(hash verified) of "driverpacks.net".i installed the xp from usb drive which i created using "WinSetupFromUSB 1.1".

1.When i move the mouse on top of the MSRT icon in the control panel it shows that an error has occurred.

see the image:

http://i41.tinypic.com/262xkjq.jpg


by the way the MSRT tool runs fine.

2.I integrated the update pack in windows 7 as the host operating system but when i checked the ryanvm integrator log file it shows "WIN_VISTA Service Pack 1 X86" corressponding to the option "running OS".

am i doing something wrong somewhere?

3.firstly i integrated the update pack then the driverpacks.then i created the bootable xp usb drive(for this i did not created any iso image but used the folder directly).

is there any particular order to follow for integrating the updates and drivers? can i integrate the driverpacks first then the update pack? also, when i was integrating the driverpacks i noticed that the driver "DP_LAN-RIS_wnt5_x86-32_1011" was not taken into account by the DriverPacks Base 10.06 application when in fact this particular driver was there in the "DriverPacks" folder.
plz tell me where i am wrong.

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Mon Dec 30, 2013 8:12 am

1) you can ignore it, it's only an InfoTip. The reason is that in newer MRT.exe versions MS has moved the resource to a different number.
To fix it before integration, modify in OPMWXPUP.inf file

Code: Select all

 HKCR, "CLSID\%MRT_GUID%", "InfoTip", %REG_EXPAND_SZ%, "@%11%\MRT.exe,-109"

in

Code: Select all

HKCR, "CLSID\%MRT_GUID%", "InfoTip", %REG_EXPAND_SZ%, "@%11%\MRT.exe,-1201"
or add an doon like this in your integration list

entries_Fix_MRT_Info.ini

Code: Select all

 ;by OnePiece
    ;#############################################################################################################
    ;This section contains version information to nLite & RyanVM Integrator Entries.ini
    ;# SPECIAL THANKS TO NONNO FABIAO FOR ALL HELP AND SUPPORT
    ;# Thank you to RYANVM that with its update pack WinXP i'm inspired myself to create this pack
    ;# Thank you to NUHI (www.nliteos.com) that with its Nlite Soft i'm inspired myself to create this IE8 AddOn
    ;# Huge thanks SIGINET (http://www.siginetsoftware.com) for all suggestions and Support
    ;# Huge thanks Xable (http://thehotfixshare.net) for all Unofficial Hotifx
    ;# Huge thanks N1K (http://www.WinCert.net) and voidseesaw ( http://voidseesaw.com) host this Update Pack
    ;# Huge thanks Kelsenellenelvian (http://www.wpiw.net/) and ricktendo64 (www.ricktendo.com) for all Support
    ;# Huge thanks to all guys of Eng2ITA and WinCert Forum and RyanVM Forum
    ;# This file contains a list of all necessary entries to add in the various installation
    ;# files of Windows for the integration of OnePiece's Windows XP Post-SP3 Update Pack.
    ;#############################################################################################################

    [general]
    builddate=2013/12/28
    description=Repair OnePiece's Windows XP Post-SP3 Update Pack
    forcelang=English
    language=English
    ServicePack=SP3
    title=Repair OnePiece's Windows XP Post-SP3 Update Pack
    version=7.5.0
    website=http://www.microsoft.com/technet/security/current.aspx
    Windows=XP

    ;This section allows you to edit things that normally would not be possible to edit.
    [ExtraFileEdits]
    OPMWXPUP.inf|@%11%\MRT.exe,-109|@%11%\MRT.exe,-1201


Fix_MRT_Info_AddOn_B9D8445C4397C48819F1A6237D0E8775.cab
28 December 2013
http://www.mirrorcreator.com/files/11GW ... .cab_links
http://go4up.com/dl/1KN6BSp8T7RA/Fix_MR ... 0E8775.cab
B9D8445C4397C48819F1A6237D0E8775
927 bytes (927 bytes)

or from a running system desktop, copy in a notepad file this and save as Fix_MRT_Info.reg

Code: Select all

Windows Registry Editor Version 5.00

    [HKEY_CLASSES_ROOT\CLSID\{72A2A18F-FC2B-4F74-92DA-7091EF4584E8}]
    "InfoTip"=hex(2):40,00,43,00,3a,00,5c,00,57,00,49,00,4e,00,44,00,4f,00,57,00,\
      53,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,4d,00,52,\
      00,54,00,2e,00,65,00,78,00,65,00,2c,00,2d,00,31,00,32,00,30,00,31,00,00,00
2) Windows 7 didn't exist when latest RVMi was released. I guess this is the reason.

3) Driverpacks should be the very latest thing in integration order
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

mukeshkumar
Posts: 4
Joined: Sat Dec 14, 2013 7:48 am

Post by mukeshkumar » Sat Jan 04, 2014 11:22 am

@nonno fabio

1. 1st method:
I didn't tried the first method.

2nd method:
Integrating the addon "Fix_MRT_Info_AddOn_B9D8445C4397C48819F1A6237D0E8775.cab" failed.
I integrated it in a separate session after the update pack integration but before integrating the driverpacks.
I integrated the addon in windows 7(as the host operating system).
see this image for more details on the error.
http://i40.tinypic.com/2r6035u.jpg

also i extracted this addon and tried to integrate the "entries_Fix_MRT_Info.ini" file as addon but failed
and got the same error as shown in the image above.

I did the whole thing in windows xp(as the host operating system) also but failed with the same error
mentioned in the image above.



3rd method:
Merging the registry file worked fine.
see the image below.

http://i42.tinypic.com/rblic9.jpg


2.in reply to my third question you said:driverpacks should be the very latest thing in integration order.
do you mean driverpacks should be the very "last" thing in integration order?
also, you didn't answered the 2nd part of the 3rd question.do i have to ask it on the driverpacks.net forum?
Last edited by mukeshkumar on Sun Jan 05, 2014 12:18 pm, edited 1 time in total.

Ultraform
Posts: 43
Joined: Mon Oct 29, 2012 11:17 pm

Post by Ultraform » Sun Jan 05, 2014 11:20 am

OnePiece Alb wrote:Hi dudeuk, just extract the Update Pack and replace rvkroots.exe inside and archive it again http://www.ryanvm.net/forum/viewtopic.p ... 219#135219 or after the integration of the Update Pack, go to the CD\I386 folder and delete the rvkroots.ex_ and copy the new rvkroots.exe

Ciao.

I cant make it work :/ something goes wrong, when i try to install the windows, i got error =(
At someway i destroy the files when i try to replace the new file.

User avatar
OnePiece Alb
Posts: 525
Joined: Sat Sep 01, 2007 7:01 pm
Location: Albania
Contact:

Post by OnePiece Alb » Sun Jan 05, 2014 11:55 am

Ultraform wrote: I cant make it work :/ something goes wrong, when i try to install the windows, i got error =(
At someway i destroy the files when i try to replace the new file.
there is nothing there that can go wrong

need more info, explains in detail all the steps that run them

Ciao.
Image Image Image

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Sun Jan 05, 2014 1:29 pm

mukeshkumar wrote:@nonno fabio

1. 1st method:
I didn't tried the first method.

2nd method:
Integrating the addon "Fix_MRT_Info_AddOn_B9D8445C4397C48819F1A6237D0E8775.cab" failed.
I integrated it in a separate session after the update pack integration but before integrating the driverpacks.
I integrated the addon in windows 7(as the host operating system).
see this image for more details on the error.
http://i40.tinypic.com/2r6035u.jpg

also i extracted this addon and tried to integrate the "entries_Fix_MRT_Info.ini" file as addon but failed
and got the same error as shown in the image above.

I did the whole thing in windows xp(as the host operating system) also but failed with the same error
mentioned in the image above.



3rd method:
Merging the registry file worked fine.
see the image below.

http://i42.tinypic.com/rblic9.jpg


2.in reply to my third question you said:driverpacks should be the very latest thing in integration order.
do you mean driverpacks should be the very "last" thing in integration order?
also, you didn't answered the 2nd part of the 3rd question.do i have to ask it on the driverpacks.net forum?
1. an "|1" is missing, sorry

Code: Select all

    ;by OnePiece
    ;#############################################################################################################
    ;This section contains version information to nLite & RyanVM Integrator Entries.ini
    ;# SPECIAL THANKS TO NONNO FABIAO FOR ALL HELP AND SUPPORT
    ;# Thank you to RYANVM that with its update pack WinXP i'm inspired myself to create this pack
    ;# Thank you to NUHI (www.nliteos.com) that with its Nlite Soft i'm inspired myself to create this IE8 AddOn
    ;# Huge thanks SIGINET (http://www.siginetsoftware.com) for all suggestions and Support
    ;# Huge thanks Xable (http://thehotfixshare.net) for all Unofficial Hotifx
    ;# Huge thanks N1K (http://www.WinCert.net) and voidseesaw ( http://voidseesaw.com) host this Update Pack
    ;# Huge thanks Kelsenellenelvian (http://www.wpiw.net/) and ricktendo64 (www.ricktendo.com) for all Support
    ;# Huge thanks to all guys of Eng2ITA and WinCert Forum and RyanVM Forum
    ;# This file contains a list of all necessary entries to add in the various installation
    ;# files of Windows for the integration of OnePiece's Windows XP Post-SP3 Update Pack.
    ;#############################################################################################################

    [general]
    builddate=2013/12/28
    description=Repair OnePiece's Windows XP Post-SP3 Update Pack
    forcelang=English
    language=English
    ServicePack=SP3
    title=Repair OnePiece's Windows XP Post-SP3 Update Pack
    version=7.5.0
    website=http://www.microsoft.com/technet/security/current.aspx
    Windows=XP

    ;This section allows you to edit things that normally would not be possible to edit.
    [ExtraFileEdits]
    OPMWXPUP.inf|%11%\MRT.exe,-109|%11%\MRT.exe,-1201|1



Fix_MRT_Info_AddOn_D1481DD66D5B3DD73E1F84EA7A724DA5.cab
‎4 January ‎2014
http://mir.cr/0XM2ZRY7
http://go4up.com/dl/1END5WTucjmE/Fix_MR ... 724DA5.cab
D1481DD66D5B3DD73E1F84EA7A724DA5
927 bytes (927 bytes)

2. Yes. About 2nd part of the 3rd question, I don't know, sorry again.
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

mukeshkumar
Posts: 4
Joined: Sat Dec 14, 2013 7:48 am

Post by mukeshkumar » Tue Jan 07, 2014 4:20 am

@ nonno fabio
The Addon "Fix_MRT_Info_AddOn_D1481DD66D5B3DD73E1F84EA7A724DA5.cab" also works fine.
see the image
http://i44.tinypic.com/34r999v.jpg


Thanks for all the help. :)

shon3i
Posts: 195
Joined: Thu Oct 19, 2006 1:16 pm

Post by shon3i » Sun Jan 12, 2014 1:27 pm

What is preferred way to remove/not install msn messanger ? is there some removal addon ?

Thanks

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Wed Jan 15, 2014 4:04 pm

new release (see changelog)
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

cosy
Posts: 278
Joined: Tue Apr 18, 2006 11:56 pm

Post by cosy » Fri Jan 17, 2014 10:25 am

thank you for this version, now I will look for the DEU version too.
A nice day

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Fri Jan 17, 2014 3:08 pm

there is only one update this month, I suggest you to use WU/MU for online system (and Nlite to add it in your XP source).
Anyway Updatepack directory in Mega and Box repositories is always updated, go to DXUPAC topic first.
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

viggen66
Posts: 14
Joined: Wed Oct 09, 2013 6:12 am

Post by viggen66 » Mon Jan 20, 2014 2:56 pm

Microsoft has just expanded anti-malware support until July 2015, namely Microsoft Security Essentials.

http://www.techtimes.com/articles/2796/ ... y-2015.htm

viggen66
Posts: 14
Joined: Wed Oct 09, 2013 6:12 am

Post by viggen66 » Sat Feb 08, 2014 6:22 am

As you know Microsoft, is trying to convince people to ditch XP in favour of a newer Windows Edition, I'm using XP Home Edition, and I'm quite happy with it, of all users of this forum, will you still use XP after April 2014?

User avatar
PJAmerica
Posts: 124
Joined: Thu Oct 03, 2013 12:05 pm

Post by PJAmerica » Sun Feb 09, 2014 1:26 am

viggen66 wrote:As you know Microsoft, is trying to convince people to ditch XP in favour of a newer Windows Edition, I'm using XP Home Edition, and I'm quite happy with it, of all users of this forum, will you still use XP after April 2014?
I have to even through I don't want to. I can't afford to upgrade my PC or hardware to use windows 7 and my PC is too old and incompatible to run windows 7 or 8 so I am stuck.

viggen66
Posts: 14
Joined: Wed Oct 09, 2013 6:12 am

Post by viggen66 » Sun Feb 09, 2014 8:40 am

My own machine can handle 7, and 8.1 and I'm stick to XP, because for me is the best operating system from Microsoft.

Post Reply