[Addon] XPSP3 QFE POSReady Updates 20180917

Post by **5eraph** » Wed Mar 16, 2016 3:27 pm

adric wrote:Not sure why this did not show up when I first checked with MU

usbstor.sys is only installed when needed. You may have checked MU before plugging-in your USB drive. The update would appear to be installed at that time because the registry entries for KB3139398 would be proof enough it had been installed. Then, after plugging-in your USB drive, usbstor.sys would be copied out of driver.cab--the OLD version. When next you checked MU it would detect the mismatched file version and offer the update.

adric · Post by **adric** » Wed Mar 16, 2016 3:37 pm

Okay, I replaced the old usbstor.sys in drivers\ and dllcache\ and ran another scan. No new offers.

Post by **5eraph** » Thu Mar 24, 2016 3:05 pm

Good to hear, adric.

Updated to 20160324:

Updated Adobe Flash to v21.0.0.197 from v21.0.0.182.

Dibya · Post by **Dibya** » Fri Mar 25, 2016 1:19 am

which is better ? RVMi intrigation or nlites one

Post by **5eraph** » Fri Mar 25, 2016 4:14 am

Both work well for this addon, Dibya. It's a matter of your own personal preference.

Dibya · Post by **Dibya** » Fri Mar 25, 2016 4:40 am

I use nlite to intrigating tweaking slimdown, xptsp for skinning , driverpack base for intrigating drivers and rvmi for iso making. anyway does there is any driverpack exist for xpX64? I want to intrigate a few masstorage driver

Post by **5eraph** » Fri Mar 25, 2016 5:15 am

I've never seen driverpacks for XPx64. You may have to try nLite with the drivers you want.

It may interest you to know that nLite and RVMi use the same ISO engine: mkisofs.exe

Dibya · Post by **Dibya** » Fri Mar 25, 2016 8:07 am

i donot know what wrong with nlite and driverpack.
when i make iso of driverpack intrigated xp cd under nlite it break many thing so i rvmi for that purpose.
thanks for updating
anyone know what? happened with yume ?

Dibya · Post by **Dibya** » Fri Mar 25, 2016 8:10 am

I donot why peoples say bad things about XPx64.
It is really ultra stable & lightning fast os.
another question can i install plus ! pack over XPx64?

Post by **5eraph** » Fri Mar 25, 2016 4:01 pm

My version of Plus! does install on XPx64 from CD. I don't know if the downloadable versions will install.

Dibya · Post by **Dibya** » Sun Mar 27, 2016 5:10 am

my one was is bought from shop by my grandpa for me when i am small for my dinosaur p4 pc

Dibya · Post by **Dibya** » Sun Mar 27, 2016 5:11 am

bad luck i not got it work

Post by **5eraph** » Thu Apr 07, 2016 10:13 am

Updated to 20160407:

Adobe Flash v21.0.0.197 replaced by v21.0.0.213.

dudeuk · Post by **dudeuk** » Fri Apr 08, 2016 1:21 pm

just compiled new xp pro with

XPSP3_QFE_UpdatePack_20160407
XPSP3_QFE_POSReady_Addon_20160407_5er
XPSP3_QFE_EnablePOSReadyMU_Addon_20160311
YumeYao_IE8_Addon_Nosetuperr_ENU_1.5.18
YumeYao_WMP11_Addon_ENU_V3_4_7

but get two updates needed when test windows updates online
both are security updates wepos & posready
KB3067903 & KB3033890

seems its same two updates i had show last month in windows updates online

any idea's why im getting same results each month now..

Post by **5eraph** » Fri Apr 08, 2016 1:37 pm

YumeYao's WMP11 addon is not up to date, dudeuk. KB3033890 and KB3067903 for WMP11 are needed to make it so.

Alternatively you could try Boooggy's WMP11 Slipstreamer with the necessary update packages, which will not introduce bugs with any version of Internet Explorer the way that YumeYao's WMP11 addon will.

long-lurker wrote:[...] my IE no longer shows the "new topic" or the "update post" buttons on this forum (among MANY other types of similar no-show images on pretty much ALL web sites)

web sites also no longer "flow into place"
meaning what used to by 1/2" high on the screen is now 1.25" high instead
and what used to be 2" left to right is now filled with empty space and taking up 4"

dudeuk · Post by **dudeuk** » Fri Apr 08, 2016 2:23 pm

big thanks.. been scratching me head over this one..

ill give the wmp11 slipstreamer a bash

ill let you know how it works out..

adric · Post by **adric** » Fri Apr 08, 2016 3:48 pm

dudeuk, I have an updated YumeYao Addon (v3.5.1) with the two fixes mentioned. You can download it here.
I have not noticed any problems with IE when I use it. You might want to give it a try.

Dibya · Post by **Dibya** » Fri Apr 08, 2016 11:22 pm

@adric

Thanks for that anyway previously i also updated like you but cannot figure which pos update break everything.

dudeuk · Post by **dudeuk** » Sat Apr 09, 2016 4:21 am

adric wrote:dudeuk, I have an updated YumeYao Addon (v3.5.1) with the two fixes mentioned. You can download it here.
I have not noticed any problems with IE when I use it. You might want to give it a try.

many thanks adric this will come in very handy.. top bloke for updating the wmp addon

EDIT
compiled new iso including YumeYao_WMP11_Addon_ENU_v3.5.1
all worked out well.. many thanks..

Stormit · Post by **Stormit** » Sun Apr 10, 2016 4:09 pm

Hi 5eraph and Thank You Again. I just wanted to know if you are going to update the change log. Also if you may know why windows update does not work again.

Post by **5eraph** » Sun Apr 10, 2016 6:11 pm

You're welcome.

The changelog is up to date. What do you believe is missing, Stormit? This month's scheduled updates from Microsoft won't drop until Tuesday, April 12th @17:00 UTC--roughly 43 hours from now.

What issue are you having with Windows Update? Does this have anything to do with your last post in harkaz's thread?

Stormit wrote:I'm not getting any auto updates again. Does anybody else have this problem. Is there another fix for this. Again Thank You for everything.

The following solution has worked for me in the past. Open a CMD window, then enter the commands below to reset the Automatic Updates service in Windows:

net stop wuauserv
"%SystemRoot%\system32\regsvr32" "%SystemRoot%\system32\wups2.dll"
net start wuauserv

This solution is adapted from the one posted on Tom Carpenter's blog to include the proper paths.

x64 systems also need the following command for the 32-bit process. It should be run between the net commands listed above.

"%SystemRoot%\SysWOW64\regsvr32" "%SystemRoot%\SysWOW64\wups2.dll"

Stormit · Post by **Stormit** » Mon Apr 11, 2016 11:43 am

Hi 5eraph and Thank You Again for your fast reply. I did not know about the drop date for windows update. I was looking for the 04/08/2016 change log to make a new pack.

Post by **5eraph** » Wed Apr 13, 2016 10:28 am

If you're using OnePiece's update pack, Stormit, then his thread may have a more suitable list.

Updated to 20160412. Please read the Changelog for full details.

Stormit · Post by **Stormit** » Wed Apr 13, 2016 12:39 pm

Hi 5eraph and Thank You Very Much Again for your fast reply and Your Help.

shiner · Post by **shiner** » Sat Apr 16, 2016 8:58 pm

5eraph,

I used the flash removal add-on for the first time and got a harmless error message during setup at T-08. Setup could not find the file specified for creating the update task for flash. I did follow the directions given in the Details for the removal add-on. Integrating the removal addon last in a separate run after all other integrations. I took a glance at the inf's in the POS add-on, userhidden's update pack, and the entries file in the removal add-on but nothing caught my eye as to the cause of that error message. Just thought you should know. It just brakes the flow of unattended setup.

Post by **5eraph** » Sat Apr 16, 2016 9:43 pm

Thanks for reporting. I'll see what I can do.

Stormit · Post by **Stormit** » Sat Apr 23, 2016 2:57 pm

Hi 5eraph I added your file and user_hidden files to the download I hope It's ok.

Post by **5eraph** » Tue Apr 26, 2016 8:12 am

That's fine with me...

Post by **5eraph** » Tue Apr 26, 2016 7:48 pm

...but now you might want to update your mirror, Stormit.

Updated to 20160426. Please read the Changelog for full details.

Stormit · Post by **Stormit** » Wed Apr 27, 2016 5:21 pm

Hi 5eraph and Thank You Very Much Again for your fast reply. File is there.

Post by **5eraph** » Thu May 12, 2016 5:42 am

Updated to 20160510. Please read the Changelog for full details.

=[FEAR]=JIGSAW · Post by **=[FEAR]=JIGSAW** » Thu May 12, 2016 6:12 am

thanks

Stormit · Post by **Stormit** » Thu May 12, 2016 12:34 pm

Hi 5eraph I uploaded your new file and Thank You Again.

I Also Uploaded what I think are Onepiece's most useful Files.

Stormit · Post by **Stormit** » Mon May 30, 2016 1:52 pm

Hi 5eraph I was wondering if you may have made an updated Onepiece's posready pack or if you could tell me what is missing from your files. Thank You Again. Please send me a PM when you have time

Post by **5eraph** » Sat Jun 04, 2016 10:01 pm

I haven't made an addon for OnePiece's update pack, mainly because skrell has said it is possible to use Onepiece's DX Universal UpdatePack/Addon Creator with Atari800xl's instructions. So... I haven't yet tried to make one.

Also, I don't know how OnePiece integrates and updates .NET.

The binaries in this addon should be the same as those that are used for OnePiece's update pack. But our methods differ. One difference is how we integrate time zone updates. Another is how we structure our INF files. If you look at entries_POSUpdates.ini in this addon, you'll see how user_hidden's INF is altered to remove registry entries for superseded updates. It would have to be different to work with OnePiece's INF.

PM sent.

Stormit · Post by **Stormit** » Sun Jun 05, 2016 12:39 pm

Hi 5eraph: Thanks for the Reply. No problem for the delay I was in no hurry.
If you find out anything more all I ask is that you let me know. Thanks Again.

OnePiece Alb · Post by **OnePiece Alb** » Mon Jun 06, 2016 5:08 am

@Offtopic
Hi 5eraph, it's very simple http://www.ryanvm.net/forum/viewtopic.p ... 164#140164 however just search in NetFxXX.inf an earlier\previous hotfix (KBxxxx) to see what registry adds, to be 1000% ok

about timezone http://www.ryanvm.net/forum/viewtopic.p ... 545#120545 however, just run the DXUPAC.exe and take everything from OPMWXPUP.inf (in other words, there does all the DXUPAC.exe)

Ciao.

Stormit · Post by **Stormit** » Mon Jun 06, 2016 12:39 pm

Hi OnePiece Alb: Great to see that you are still around. Would consider updating any of your packs just one more time, like the POS or Net Please. Thank You and great to see you again.

OnePiece Alb · Post by **OnePiece Alb** » Mon Jun 06, 2016 2:08 pm

Hi Stormit, http://www.ryanvm.net/forum/viewtopic.p ... 572#141572

Ciao.

Dibya · Post by **Dibya** » Mon Jun 13, 2016 2:56 am

Next Day is patch tuesday, isnt it?

Post by **5eraph** » Mon Jun 13, 2016 1:45 pm

Yes, tomorrow.

dudeuk · Post by **dudeuk** » Wed Jun 15, 2016 1:11 pm

hi.. is there any new updates to add to this update pack
many thanks in advance..

Post by **5eraph** » Wed Jun 15, 2016 2:43 pm

Yes there are, dudeuk. I'm just waiting on Adobe to release an update to Flash Player before I post this month's addon. Details are in the Changelog.

Post by **user_hidden** » Wed Jun 15, 2016 6:44 pm

if you like 5eraph you can release your POSaddon and i'll update the main pack with flash when the latest gets released

Post by **5eraph** » Thu Jun 16, 2016 12:54 am

Didn't read your post in time, user_hidden. Flash Player v22.0.0.192 has been released--hours earlier than I anticipated.

Updated to 20160614. Please read the Changelog for full details.

Post by **user_hidden** » Thu Jun 16, 2016 9:12 am

no problem 5eraph.

we all thank you for your hard work

Stormit · Post by **Stormit** » Thu Jun 16, 2016 4:45 pm

Hi 5eraph: I uploaded your new file 06/16/16 and Thank You Again.

Dibya · Post by **Dibya** » Fri Jun 17, 2016 2:59 am

Thanks 5eraph & User_Hidden
This month i have to update my 4GBUp ram patch and also I have to complete my POST usp4 Pack.

Post by **5eraph** » Tue Jul 12, 2016 6:31 pm

You're welcome, everyone.

Updated to 20160712. Please read the Changelog for full details.

Stormit · Post by **Stormit** » Tue Jul 12, 2016 9:59 pm

Hi 5eraph: I uploaded your new file 07/12/16 and Thank You Again.

RyanVM.net Discussion Board

[Addon] XPSP3 QFE POSReady Updates 20180917

About Changes

About Updates

Thank Again

Thank You Very Much Again!

Question

Thanks for Reply.

Hi OnePiece Alb

Hi 5eraph: File Updated.

Updated File