[Release] Kels' UberPacK v16.6 & Notepad2-Mod

Discuss & post Update Pack addons here.
Post Reply
User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Wed May 02, 2007 4:21 am

#1 =
5er_ShowKeyboardShortcuts_Addon <-- Never even heard of it
Kels_BubblePop_OpenSubFolder_addon_1.0.5 <-- Does NOT play well with others!!!!
Kels_OpenAL_addon_v1.9.9 <-- Runtimes see the runtimes addon I made it is in there
Kels_OpenExpert_addon_v1.4 <-- See open sub folder!
Kels_Pserv_v2.6_addon_2 <-- In the CPL All-in-One
Kels_Run_addon_v1.4.2 <-- Yup its in there
Kels_UniversalSilentSwitchFinder_addon_v1.4.1.1 <-- Not enough call for it
Kels_UPXShell_Addon_v3.2.1build2007 <-- Just found a conflict with this one and the UberPacK
Kels_WinSCP_v3.8.2 <-- Not enough call for this one either
MrsP_FileCase_ShellExt_Addon_v1.2.7.28 <-- Yup its in there
MrsP_Window_Sizer_Addon_v3.3 <-- Never looked at it
Xable_ContextAttributes-v1.1_addon <-- In there 2
Xable_DateEdit-v1.0_addon <-- Yup this one is in there also
Xable_PathCopy-v1.1_addon <-- Clipnames is slightly better IMO
TweakUI.exe <-- CPL All-in-One

The 3 I said does not play well with others you would be better off leaving out.

#2 NONE! Nearly everything in Ryans pack is in mine...

#3 SO?!?!? J/K Yeah I saw that thanks.
Last edited by Kelsenellenelvian on Wed May 02, 2007 4:32 am, edited 1 time in total.

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Wed May 02, 2007 4:21 am

HEY RYAN! We need flood control here!

Oops I double posted! :oops:

User avatar
5eraph
Site Admin
Posts: 4619
Joined: Tue Jul 05, 2005 9:38 pm
Location: Riverview, MI USA

Post by 5eraph » Wed May 02, 2007 10:43 am

Kelsenellenelvian wrote:5er_ShowKeyboardShortcuts_Addon <-- Never even heard of it
It's just a tweak addon, Kel, but it's been around a while.

Us2002, since it's just a tweak addon, perhaps it is best to keep it separated. ;)

Us2002
Posts: 90
Joined: Fri Oct 21, 2005 5:53 am

Post by Us2002 » Wed May 02, 2007 3:13 pm

2 5eraph
I know:), just asking... may be it is in pack like QuckLaunch.

2 Kel
Thanks, next time i`ll try integrate your UberAddon + CPL + 5er_ShowKeyboardShortcuts_Addon + Kels_UniversalSilentSwitchFinder_addon_v1.4.1.1 + Kels_WinSCP_v3.8.2 + MrsP_Window_Sizer_Addon_v3.3 + other.
What is it "Clipnames"?
Dont understand... in Ryan pack CALC.EXE 946 448 bytes, in your pack 1 060 624; Makecab.exe v.5.1.2600.1106, 43 520 bytes and v.6.0.5235.0, 90 112 bytes; modifyPE.exe 8 636 bytes and 10 752 bytes.

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Wed May 02, 2007 9:23 pm

HMMMM Not sure will check into it.

User avatar
RaGhul
Posts: 375
Joined: Wed Nov 01, 2006 5:56 pm
Location: San Diego, CA

Post by RaGhul » Thu May 03, 2007 1:34 am

@Kel

I like the 'screw' cursor in the screenshot in the first post. Where can I get it?

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Thu May 03, 2007 1:58 am

CursorXP with the theme "Gear"

Us2002
Posts: 90
Joined: Fri Oct 21, 2005 5:53 am

Post by Us2002 » Fri May 04, 2007 3:14 pm

2 Kel
Integtated, installed, normal fly, but... not exist open subfolder and open in new folder (are exist alternative functional nice feature?) and in SendTo exist not working link to upx.

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Fri May 04, 2007 9:47 pm

Fixing the upx sendto now. Open in new folder?? Open subfolder does not work well and will not be in this pack.

Us2002
Posts: 90
Joined: Fri Oct 21, 2005 5:53 am

Post by Us2002 » Sat May 05, 2007 12:47 pm

2Kel
grrrr... my mistake... not Open in new folder, but Open in new window... just a regtweak, forget it.
q: why RogueSpear sad that your Uber pack and his switchless installers are not compatible?

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sat May 05, 2007 3:13 pm

I have no clue why roguespear would say that. O.o very weird because I use ALOT of silent installers.

User avatar
ENU_user
Posts: 1253
Joined: Wed Jan 25, 2006 1:42 pm

Post by ENU_user » Sun May 06, 2007 6:05 am

mmm, for the record what files uberpack directly replaces up-till-now ? if at all ..

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sun May 06, 2007 6:14 am

Calc.exe
Calc.chm
Makecab.exe

Acheron
Posts: 389
Joined: Thu Nov 25, 2004 4:05 pm
Location: The Netherlands
Contact:

Post by Acheron » Sun May 06, 2007 3:25 pm

I personally use the following regtweaks:

Code: Select all

;Open in New window
[HKEY_CLASSES_ROOT\Directory\shell\New Window]
@="&New window"

[HKEY_CLASSES_ROOT\Directory\shell\New Window\Command]
@="explorer.exe %1"

Code: Select all

;Run at high priority
[HKEY_CLASSES_ROOT\exefile\shell\runhigh]
@="Run at high priority"

[HKEY_CLASSES_ROOT\exefile\shell\runhigh\command]
@="cmd.exe /c start \"runhigh\" /high \"%1\""
Might be useful to add :)

Us2002
Posts: 90
Joined: Fri Oct 21, 2005 5:53 am

Post by Us2002 » Sun May 06, 2007 3:45 pm

This is part of tweaks that i`m using:

;Speeds up copying/moving of zip files (disable windows built in zip functionality)
[-HKEY_CLASSES_ROOT\.zip\CompressedFolder]
[-HKEY_CLASSES_ROOT\CLSID\{E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31}]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CompressedFolder]

;"Îòêðûòü ñ ïîìîùüþ..." äëÿ ëþáûõ òèïîâ ôàéëîâ. (OpenAs for all types)
[HKEY_CLASSES_ROOT\*\Shell\openas]
@="OpenAs..."
[HKEY_CLASSES_ROOT\*\Shell\openas\command]
@="rundll32.exe shell32.dll,OpenAs_RunDLL \"%1\""

;This adds an option in the right-click (context) menu to open any folder on your computer in a new window.
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Directory\shell\openNew]
@="Open In New &Window"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Directory\shell\openNew\Command]
@="explorer %1"

;Adds Registry Editor right click of MY Computer
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\regedit]
@="Registry Editor"
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\regedit\command]
@="Regedit.exe"

;Adds Add/Remove to right click of MY Computer
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Add/Remove Programs\command]
@="control appwiz.cpl"

;Adds MSCONFIG right click of MY Computer
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\msconfig]
@="Microsoft Configurator"
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\msconfig\command]
@="msconfig.exe"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main]
"Default_Page_URL"="about:blank"
;"Default_Search_URL"="http://www.google.ru"
;"Search Page"="http://www.google.ru"
"Start Page"="about:blank"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main\UrlTemplate]
"5"="www.%s.gov"
"6"="www.%s.mil"

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sun May 06, 2007 5:00 pm

Added open in a new window regtweak thanks.

Updated!

dkrus
Posts: 372
Joined: Wed Jun 21, 2006 1:54 pm

Post by dkrus » Mon May 07, 2007 9:15 am

Thanks Kel for the update

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Mon May 14, 2007 4:18 am

Updated...

User avatar
ton80
Posts: 211
Joined: Mon Mar 07, 2005 3:10 am

Post by ton80 » Mon May 14, 2007 7:53 am

Kel., the 'advanced uninstall' on the inf doesn't work and in add/remove programs ("Show updates" ticked) only regshot, unlocker, and the TaskSwitch worked.


Now on the CPL addon it did work and I'm glad you had that in there because add/remove programs didn't work either for the CPL.
Ton80

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Mon May 14, 2007 9:02 am

k will check into

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Mon May 14, 2007 9:12 am

Your add\remove section has to be borked. I have not touched the uninstall sections for a coupla releases and on my machine I just redid this morning with Ryans 2.1.10 and severall addons, including CPl a-i-o and uberpack all of the entries show up fine and do what they are supposed to do. I just uninstalled all of them.

As for the Advance uninstall not working on my UberPacK - It won't. It looks for a xection called uninstall and runs it. However due to the fact that I have several uninstalls running from that inf and none of them are named just uninstall.

After a right click install:

Image

User avatar
ton80
Posts: 211
Joined: Mon Mar 07, 2005 3:10 am

Post by ton80 » Tue May 15, 2007 7:35 am

Hmmm ok hmm I'm not wanting to reinstall Windows but I may have to. :evil: @ MS.
Thx Kelsenellenelvian.
Ton80

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Tue May 15, 2007 5:41 pm

Updated.

User avatar
Sanjay
I can't read
Posts: 337
Joined: Fri Dec 17, 2004 9:28 am
Location: New Delhi, India

Problem with 'Clear Type turned on by default' & 'Unlocker'

Post by Sanjay » Wed May 16, 2007 7:53 pm

Hello Kel,

I tried Uberpack v9.9.5 in a new Unattended DVD today and for some reason the ClearType turned on by default' did not work. Can someone please confirm whether this is a problem with this pack or am I just doing something wrong. I have been using this pack for a long time now withotu any problems and this is the first time that the 'Clear Type' setting did not work.

There is another issue I have been meaning to write about for the last couple of builds. For some reason the 'Unlocker' no longer shows up in the tray and also when a file si locked the unlocker box does not pop up on it's own as it used to. I see 'Unlocker' listed in the 'right click menu' and I am able to run it from there but it just does not run by default. Can you or someone else please confirm if this is a problem with the pack or is it just my implementation that is the problem.

One last thing. Is there any way for me to have the old icon for Notepad 2 back? I really prefer the old icon over the new one. Also, for some reason, my registry tweaks that used to work with the old Notepad 2 v1.??? don't work with the new Notepad 2 v2.??? For eg. 'Word Wrap = On' & 'Show Wrap Symbols = On'. Any ideas how I might be able to get these tweaks working with the new version?

Sorry, in case none of the issues are due to the pack. But I just felt that I should bring them to your attention in case they are.

Thanks for this and also for all the wonderful work you do for this forum.

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Thu May 17, 2007 2:31 pm

Haven't messed with cleartype is ages.

The unlocker icon no longer shows up because I disabled it from showing in the systray. I have reversed that change for the next release. It is easy enough to see if it is running on your system just ctrl-alt-delele and look under proccesses it will show as unlockerassistant.exe.

All of the Notepad2 settings are now kept in an ini file. Simply make and save all of your desired changes and grab the notepad2.ini from the system32 dir and copy it over at t-13 or post install.

Which icon did you like? I have tried several different ones just describe it to me I will be happy to change it back...

User avatar
Sanjay
I can't read
Posts: 337
Joined: Fri Dec 17, 2004 9:28 am
Location: New Delhi, India

Post by Sanjay » Fri May 18, 2007 1:48 am

Kelsenellenelvian wrote:Haven't messed with cleartype is ages.
The last UA DVD I made was in January and thus I think the last Uber pack I used was v8.9 where this worked fine. But now with this build v9.9.5, Cleartype did not turn on by default. Can someone please confirm that this is working in this version.
Kelsenellenelvian wrote:The unlocker icon no longer shows up because I disabled it from showing in the systray. I have reversed that change for the next release. It is easy enough to see if it is running on your system just ctrl-alt-delele and look under proccesses it will show as unlockerassistant.exe.
Thanks Kel, I see that it installs and runs fine. I still look forward to the next build with icon showing in systray.
Kelsenellenelvian wrote:All of the Notepad2 settings are now kept in an ini file. Simply make and save all of your desired changes and grab the notepad2.ini from the system32 dir and copy it over at t-13 or post install.

Which icon did you like? I have tried several different ones just describe it to me I will be happy to change it back...
Thanks for the info. Also, the icon I prefer, is the one that has an open diary with green borders with lines of writing in blue and a dark yellow pencil shown.

Thanks a ton Kel, your time and efforts are sincerely appreciated. Not only do you give so much to this forum, but you are also very receptive to suggestions and polite.

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Fri May 18, 2007 9:39 pm

updated...

User avatar
Sanjay
I can't read
Posts: 337
Joined: Fri Dec 17, 2004 9:28 am
Location: New Delhi, India

Post by Sanjay » Fri May 18, 2007 11:54 pm

Thanks a ton Kel. Now if only I can figure out the 'Cleartype On by default' issue. Will try another install with v9.6 and get back with the results.

Thanks

msdemich
Posts: 104
Joined: Sun Sep 17, 2006 2:52 am

Post by msdemich » Sat May 19, 2007 3:25 am

Kelsenellenelvian wrote:The unlocker icon no longer shows up because I disabled it from showing in the systray. I have reversed that change for the next release. It is easy enough to see if it is running on your system just ctrl-alt-delele and look under proccesses it will show as unlockerassistant.exe.
Would you change it back so its hidden? :D

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sat May 19, 2007 4:08 am

HAHAAHAHHAHHAHAH

Ummmmmm lets see what a coupla more people say.

Right now right click on it and choose hide.

User avatar
Sanjay
I can't read
Posts: 337
Joined: Fri Dec 17, 2004 9:28 am
Location: New Delhi, India

Post by Sanjay » Sat May 19, 2007 5:54 am

v9.6 is a complete success and everything works perfectly just as it should. Yes, the 'Cleartype On by default' worked fine too. I still can't fathom what may have caused it to not work last time. The Notepad2 icon is back and so is the Unlocker Icon in systray. :)

Thanks Kel, great job as always.

User avatar
TripleA
Posts: 36
Joined: Sat Oct 22, 2005 12:38 pm
Location: Planet Earth

Post by TripleA » Sat May 19, 2007 6:34 am

Well, I don't know how Kel feels about this whole thing and it's his decision in the end, naturally. But I personally feel that he cannot and should not be expected to provide a personalised edition of his pack for each and every one of us. Just learn how to tweak the settings you care about for yourself, people!

The Unlocker Assistant icon, for example, can be easily set to hidden by including "-H" in its command line (or set to show by removing same). Just extract the pack, edit UberPack.inf to your liking (search for [Unlocker.addreg] section, for Unlocker settings, in the previous example) and repack.

Simple!

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sat May 19, 2007 8:15 am

Aww shucks thanks.

This pack was built alot on user requests and I try to fill all of them as they come along. Sanjay requested a couple of minor changes and if enough users don't like them then he will naturally be over-rulled.

newsposter
Posts: 1131
Joined: Wed Sep 14, 2005 11:31 am

Post by newsposter » Sat May 19, 2007 1:20 pm

some us can't be 'bothered' to whine as much as others........

Sm0ker
Posts: 107
Joined: Mon Jan 03, 2005 5:45 pm
Location: UK

Post by Sm0ker » Sat May 19, 2007 2:28 pm

Kel, I'm happy with the way that you create the pack.

msdemich
Posts: 104
Joined: Sun Sep 17, 2006 2:52 am

Post by msdemich » Wed May 23, 2007 6:22 pm

TripleA wrote:The Unlocker Assistant icon, for example, can be easily set to hidden by including "-H" in its command line (or set to show by removing same). Just extract the pack, edit UberPack.inf to your liking (search for [Unlocker.addreg] section, for Unlocker settings, in the previous example) and repack.

Simple!
Thanks TripleA, I would have no idea how to do this otherwise.

User avatar
TripleA
Posts: 36
Joined: Sat Oct 22, 2005 12:38 pm
Location: Planet Earth

Post by TripleA » Wed May 23, 2007 9:26 pm

msdemich wrote:
TripleA wrote:The Unlocker Assistant icon, for example, can be easily set to hidden by including "-H" in its command line (or set to show by removing same). Just extract the pack, edit UberPack.inf to your liking (search for [Unlocker.addreg] section, for Unlocker settings, in the previous example) and repack.

Simple!
Thanks TripleA, I would have no idea how to do this otherwise.
You're most welcome.

Rereading my last post, I don't particularly like its tone. I apologize for that. It's just that I know the difference between KB and KiB and sometimes forget that not everyone does.

That is, I've been tinkering with stuff for a while and sometimes forget that not everyone does.

User avatar
ENU_user
Posts: 1253
Joined: Wed Jan 25, 2006 1:42 pm

Post by ENU_user » Sat May 26, 2007 3:42 am

if we had bundled some "most have" utility's to utilize as a service that would be preferred on any secured system
and probably less yak/clutter on the network and task manager ..
these as services will start before any user has logged on, it will have nothing to do with users login settings anymore
creating services using the inf file aren't that hard to make

http://www.tacktech.com/display.cfm?ttid=197
http://www.tacktech.com/pub/microsoft/s ... srvany.zip
this will help adding all needed entries for the registry

maybe a small separate pack for the test, so later can incorporate it to this one
i.e ulocker, taskswitch, lclock, vista drive ...more ..
i am all for this hope you 2, of course i will help test ... ;)

so why turn into service ? ..
its mainly good for tools that you know : are running at all times, turning them into a service will make the system more tweaked and secured by probably getting less calls in the network ( as in example )

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Wed May 30, 2007 12:46 am

Updated

User avatar
ENU_user
Posts: 1253
Joined: Wed Jan 25, 2006 1:42 pm

Post by ENU_user » Wed May 30, 2007 9:18 pm

UPXShell-3.4.2.2007 in sendto maybe ?

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Wed May 30, 2007 9:56 pm

I dunno if it works like that I will look into it.

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sat Jun 09, 2007 7:43 am

Updated.

User avatar
Master Wolfe
Posts: 79
Joined: Sun Oct 15, 2006 11:50 pm
Location: Panama City Beach, FL

Post by Master Wolfe » Sat Jun 09, 2007 8:30 am

Kel, it is downloading as 9.9.7, not sure if you forgot to just change the name perhaps? Thanks!

User avatar
Sanjay
I can't read
Posts: 337
Joined: Fri Dec 17, 2004 9:28 am
Location: New Delhi, India

Post by Sanjay » Sat Jun 09, 2007 3:29 pm

Master Wolfe wrote:Kel, it is downloading as 9.9.7, not sure if you forgot to just change the name perhaps? Thanks!
Nope, it seems Kel simply forgot to upload the new v9.9.8 file. The linked file still matches the old Hash.

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sat Jun 09, 2007 8:54 pm

Sorry fixed

larciel
Posts: 216
Joined: Tue Dec 21, 2004 3:14 am

Post by larciel » Sun Jun 10, 2007 2:41 am

Thanks for another update,

this just came to my mind but I think you might have moved too fast on rev. #

v10 seems like it's next in line, but change of first revision number would warrant a big change.

just an off topic from a single man so damm bored on a beautiful saturday night stuck on a computer. :P

cheers to you :D

User avatar
conan
Posts: 50
Joined: Tue Apr 03, 2007 4:12 pm

Post by conan » Mon Jun 11, 2007 3:36 pm

Resource Hacker don't work for change installer icon in
Right click on installer->Send To->Resource Hacker->Action->Replace Icon...
(in both 9.9.7 and 9.9.8 version).

User avatar
ENU_user
Posts: 1253
Joined: Wed Jan 25, 2006 1:42 pm

Post by ENU_user » Mon Jun 25, 2007 9:39 am

does removing\deleting mmm.exe from system32 makes your explorer faster anyone ...?
happy computing all. ;)

arco
Posts: 137
Joined: Fri Aug 04, 2006 1:50 pm
Location: Netherlands

Post by arco » Thu Jul 19, 2007 2:08 pm

Reg2Inf 0.42 is out
RegShot 1.80 1.81 also

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Fri Jul 20, 2007 12:42 am

Yes to the Reg2Inf!!

No to the regshot (The one in my uberpack was specifically built to save the results in reg formatting.)

Post Reply