[Release] Kels' UberPacK v16.6 & Notepad2-Mod

Discuss & post Update Pack addons here.
Post Reply
benjamminzIS
Posts: 227
Joined: Fri Jan 12, 2007 8:07 am

Post by benjamminzIS » Thu Jul 03, 2008 8:12 pm

it never worked until I added the other reg entries... doesn't make sense but I also never bothered to contact the developer to ask either...
_coming soon, don't hold your breath

benjamminzIS
Posts: 227
Joined: Fri Jan 12, 2007 8:07 am

Post by benjamminzIS » Thu Jul 03, 2008 11:57 pm

Kelsenellenelvian wrote:A quick test run shows this:

Image

I can add in the other stuff in the next version if you agree it is still needed.
I am not sure how it works without these reg entries, as I JUST found out on a test install. I had forgot to change one character of the 2nd line that I posted and until I manually changed that value to be correct it had no "context menu" feature...
_coming soon, don't hold your breath

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Wed Jul 09, 2008 12:28 am

Updated UberPacK AND Notepad++

dkrus
Posts: 372
Joined: Wed Jun 21, 2006 1:54 pm

Post by dkrus » Wed Jul 09, 2008 12:50 am

Thanks Kel

User avatar
ton80
Posts: 211
Joined: Mon Mar 07, 2005 3:10 am

Post by ton80 » Wed Jul 09, 2008 1:27 am

Thanks Kel.. Just in time for my correction of burn over the weekend.
Ton80

User avatar
ENU_user
Posts: 1253
Joined: Wed Jan 25, 2006 1:42 pm

Post by ENU_user » Wed Jul 16, 2008 8:49 am


larciel
Posts: 216
Joined: Tue Dec 21, 2004 3:14 am

Post by larciel » Thu Jul 24, 2008 2:42 am

anyone experience little delay in startup with this addon?
There's about 30second delay after desktop loads.

Also unlocker assistant isn't loading up.

Thanks in adv Kel

User avatar
garson
Posts: 14
Joined: Tue Aug 28, 2007 11:42 pm

Post by garson » Mon Aug 11, 2008 1:14 am

Notepade++ 5.0.3 is out. :) Please update.

User avatar
Cipherfx2
Posts: 182
Joined: Fri Jul 27, 2007 12:16 am
Location: Philippines

Post by Cipherfx2 » Mon Aug 11, 2008 7:21 am

Link is dead... :rolleyes: "Page cannot be found" :?:

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Mon Aug 11, 2008 7:28 am

Updated the UberPacK doing notepad++ tomorrow..

User avatar
Cipherfx2
Posts: 182
Joined: Fri Jul 27, 2007 12:16 am
Location: Philippines

Post by Cipherfx2 » Mon Aug 11, 2008 8:50 pm

Thanks Kels for the Update :D

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Fri Aug 15, 2008 2:49 am

Updated Notepad++ to 5.0.3

User avatar
garson
Posts: 14
Joined: Tue Aug 28, 2007 11:42 pm

Post by garson » Fri Aug 15, 2008 9:54 am

Kelsenellenelvian wrote:Updated Notepad++ to 5.0.3
Thanks man. :)

sgmihai
Posts: 8
Joined: Sat Jul 01, 2006 5:29 am

Post by sgmihai » Fri Aug 29, 2008 7:50 am

Kels_NotePad++_v5.0.3_addon_replacer.cab
this one had a bug for me, after integrating with nlite and installing windows, wen i doubled click a .txt file, notepad++ would start but without that file loaded. I went to notepad++ official site and followed their instructions for replacing windows' notepad, and now it works. does anyone know what's wrong ?

User avatar
crashfly
Posts: 789
Joined: Thu Mar 13, 2008 11:39 pm
Location: Arkansas, USA

Post by crashfly » Fri Aug 29, 2008 7:55 am

It sounds like the registry "hijack" method did not work on your computer.
A mind is like a parachute, it only functions when it is open.
--Anonymous

How to Ask Questions the Smart Way

sgmihai
Posts: 8
Joined: Sat Jul 01, 2006 5:29 am

Post by sgmihai » Fri Aug 29, 2008 8:03 am

is this because of nlite?

User avatar
crashfly
Posts: 789
Joined: Thu Mar 13, 2008 11:39 pm
Location: Arkansas, USA

Post by crashfly » Mon Sep 01, 2008 3:19 pm

sgmihai wrote:is this because of nlite?
No. I use nlite all of the time. Sounds like something did not get integrated properly.
A mind is like a parachute, it only functions when it is open.
--Anonymous

How to Ask Questions the Smart Way

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Thu Sep 11, 2008 1:36 am

Updated...

dkrus
Posts: 372
Joined: Wed Jun 21, 2006 1:54 pm

Post by dkrus » Thu Sep 11, 2008 10:37 pm

Thanks Kel

User avatar
crashfly
Posts: 789
Joined: Thu Mar 13, 2008 11:39 pm
Location: Arkansas, USA

Post by crashfly » Thu Sep 11, 2008 11:00 pm

Yes, we cannot say it enough ... thank you very much Kelsenellenelvian.
A mind is like a parachute, it only functions when it is open.
--Anonymous

How to Ask Questions the Smart Way

RtOaNn
Posts: 19
Joined: Fri Jan 25, 2008 9:46 am

Notepad++ Uninstallable Version

Post by RtOaNn » Mon Sep 15, 2008 1:15 am

After installing the above addon, can i still update Notepad++ in the future?

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Mon Sep 15, 2008 1:25 am

yes

RtOaNn
Posts: 19
Joined: Fri Jan 25, 2008 9:46 am

Post by RtOaNn » Mon Sep 15, 2008 1:30 am

ok,cool! thanks!

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Wed Sep 17, 2008 1:39 am

Updated Notepad2!

Thansk FLorian and Code!

dnoiz
Posts: 22
Joined: Tue Jan 29, 2008 3:11 pm

Post by dnoiz » Sat Sep 20, 2008 7:34 am


55ttt
Posts: 17
Joined: Sun Sep 21, 2008 11:20 am

Post by 55ttt » Sun Sep 21, 2008 12:20 pm


dkrus
Posts: 372
Joined: Wed Jun 21, 2006 1:54 pm

Post by dkrus » Sun Sep 21, 2008 12:45 pm

I seen on wincert it was updated to 13.5

User avatar
crashfly
Posts: 789
Joined: Thu Mar 13, 2008 11:39 pm
Location: Arkansas, USA

Post by crashfly » Sun Sep 21, 2008 1:14 pm

Well if it helps any, I already got the file from over off of wincert.

Thank you very much for keeping this as well as the notepad2 addon updated Kel. Your work is important to me. Keep up the great work.
A mind is like a parachute, it only functions when it is open.
--Anonymous

How to Ask Questions the Smart Way

55ttt
Posts: 17
Joined: Sun Sep 21, 2008 11:20 am

Post by 55ttt » Sun Sep 21, 2008 1:39 pm


User avatar
code65536
Posts: 735
Joined: Wed Mar 14, 2007 2:58 pm
Location: .us
Contact:

Post by code65536 » Sun Sep 21, 2008 3:18 pm

Suggestion: If you are going to turn on ClearType by default, you might want to consider the following registry entry as well:

Code: Select all

HKCU,"Control Panel\Desktop","FontSmoothingGamma",0x10001,b0,04,00,00
Background: I've noticed that Vista's ClearType usually looks fantastic out-of-the-box while XP's look pretty bad without tuning. I used to think that this was because Vista's ClearType was somehow better than XP's. But it turns out that they're the same, and that the only difference is that Vista's default gamma value is set to 1200 while XP's is set to 1400 (you can check this by making the SPI_GETFONTSMOOTHINGCONTRAST API call after a clean Vista install and after a clean XP install). This key will change the CT gamma value in XP to match that in Vista.
My addons: CmdOpen - HashCheck - Notepad2 - MS Runtimes - DirectX

Into the breach, meatbags!

dnoiz
Posts: 22
Joined: Tue Jan 29, 2008 3:11 pm

Post by dnoiz » Wed Sep 24, 2008 5:50 am


User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sun Oct 19, 2008 4:10 am

Updated.

dkrus
Posts: 372
Joined: Wed Jun 21, 2006 1:54 pm

Post by dkrus » Mon Oct 20, 2008 5:07 pm

Thanks Kel

User avatar
crashfly
Posts: 789
Joined: Thu Mar 13, 2008 11:39 pm
Location: Arkansas, USA

Post by crashfly » Wed Oct 29, 2008 1:11 pm

Kelsenellenelvian, is there any possible chance that you have a x64 bit version of this addon, or could point me to one that has all of the programs your addon does?

I am hoping that you have made a 64 bit version of this addon, because I really like the addons that you make. I cannot see myself living without certain ones.

If you do not have a 64 bit version, is there a way to make this one compatible with a 64 bit install?
A mind is like a parachute, it only functions when it is open.
--Anonymous

How to Ask Questions the Smart Way

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Wed Oct 29, 2008 11:55 pm

Man my experiances with x64 have all been BAD!!!

I will gladly help you with making one, as for me though I won't be making one in the near future.

Remember though most of this stuff Will not work on x64 so we would have to find alternatives.

mindwarper
Posts: 255
Joined: Mon Jul 25, 2005 9:56 pm
Location: Netherlands

Post by mindwarper » Sat Nov 01, 2008 6:21 am

Kel it seems in the 1st post of this thread the link to the NotePad2 addon is invalid...
Please take a look, iof you find the time of course (no offense intended)...

EDIT:
Ok my mistake...
I saw over at that very wincert link, that it had been updated to the RC3 version :)
Sorry for the hassle

User avatar
cynric
Posts: 18
Joined: Sat Nov 01, 2008 11:34 am

Post by cynric » Sat Nov 01, 2008 11:23 pm

Nice pack -- still going through all the tools. In the process, I found a few dead links. Suggestion provided.

Calculator Plus: http://www.microsoft.com/downloads/deta ... 47f157c091 Dead page.

RegShot: http://sourceforge.net/projects/regshot/ Site moved.

CabTool: Links to msfn ok, but the subsequent download link is broken. Haven't found another place to obtain it. The link does provide info on the tool so it's still informative.

Attribute Changer: http://www.petges.lu/ Site moved.

Create ISO: Wrong link (looks like you got off by one). See next.

File Extension Toggle: This link is actually for Create ISO. FET should point back to http://www.msfn.org/board/index.php?showtopic=52524

HashTab: Site appears to be down. Temporary thing?
"This Snow Crash thing -- is it a virus, a drug, or a religion?" "What's the difference?"
-- Neal Stephenson - Snow Crash

cybpsych
Posts: 421
Joined: Wed Jan 12, 2005 2:33 am

Post by cybpsych » Sun Nov 02, 2008 4:21 am

nore sure if you know this, but Notepad2 v3.0.20 (Final) is out.

EDIT: Open Command Prompt Shell Extension has been updated to v1.1.2

cheers!

EDIT: Attribute Changer updated to v6.1 with new URL as well: http://www.petges.lu/windows/changelog/changelog.html

TechnoHunter
Posts: 506
Joined: Sun Feb 26, 2006 4:13 am

Post by TechnoHunter » Sun Nov 02, 2008 4:37 am

cynric wrote:HashTab: Site appears to be down. Temporary thing?
link works for me.. check dns cache maybe?
good luck!

TechnoHunter

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sun Nov 02, 2008 5:18 am

Looks like its time to update it all :O

I will try tonight but it's been a long day and I have a long day tommorow :P

@Cynric thanks for the leg work!

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sun Nov 02, 2008 7:54 am

I still have the original CabTool Setup so if you want it just shout please.




Every component has been updated!




I am running the VM test now though :P They have passed the other normal tests though :D

User avatar
cynric
Posts: 18
Joined: Sat Nov 01, 2008 11:34 am

Post by cynric » Sun Nov 02, 2008 9:21 am

Bah. I should have checked versions while I was peeking at everything. Downloading update now.

If you don't mind, I would like tuck a copy of CabTool away in case the internet is nuked :)
"This Snow Crash thing -- is it a virus, a drug, or a religion?" "What's the difference?"
-- Neal Stephenson - Snow Crash

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sun Nov 02, 2008 9:31 am

Sure no prob...

http://www.wpiw.net/downloads/cabtool.exe

I checked around and am pretty sure the uber-pack is fully upto date now :D

User avatar
cynric
Posts: 18
Joined: Sat Nov 01, 2008 11:34 am

Post by cynric » Sun Nov 02, 2008 9:32 am

Thanks for the link. No problems using 13.7 so far.
"This Snow Crash thing -- is it a virus, a drug, or a religion?" "What's the difference?"
-- Neal Stephenson - Snow Crash

cybpsych
Posts: 421
Joined: Wed Jan 12, 2005 2:33 am

Post by cybpsych » Tue Nov 11, 2008 7:07 pm

hi kel, Notepad++ v5.1.1 is out ;)

Changelog:
- Fix Unicode version display Korean/Japanese language problem.
- Fix bug : Open in new instance not allowing spaces in paths.
- Fix "Global Styles" string incorrectly displayed in Unicode version.
- Fix filters for open/save dialog not showing or incorrectly (showing 'L').
- Fix calltip argument with 'L' leader character bug.
- Fix tab control draw bug.

cybpsych
Posts: 421
Joined: Wed Jan 12, 2005 2:33 am

Post by cybpsych » Tue Nov 25, 2008 4:07 am

Attribute Changer 6.10a released

Code: Select all

http://webplaza.pt.lu/rpetges/download/ac.exe
Some issues were reported for Attribute Changer 6.10 and they are now fixed in this maintenance release.

Updates

- Picture date and time checkboxes now unchecked by default

Bug fixes

- JPEG Error 52 while modifying EXIF data
- 'Failed to set calendar date or time' error on Windows Vista
- Copy buttons fail on Windows Vista for DateTimePicker operations

Microsoft decided to change the way the DateTimePicker common control behaves for Windows Vista and this broke Attribute Changer. The only way to work around this problem is to use native Win32 API calls instead of Delphi class methods .... but it took me a long time to figure out what broke.

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Wed Nov 26, 2008 3:04 am

Updated.

dkrus
Posts: 372
Joined: Wed Jun 21, 2006 1:54 pm

Post by dkrus » Fri Nov 28, 2008 5:39 pm

Thanks Kel

Raoul90
Posts: 675
Joined: Thu Jan 17, 2008 10:29 am
Location: The Netherlands

Post by Raoul90 » Sun Nov 30, 2008 4:31 am

OpenCMD v1.1.3 is out. :)

Thank you.

User avatar
Kelsenellenelvian
Moderator
Posts: 4383
Joined: Tue Nov 30, 2004 8:32 pm
Location: Pocatello, ID
Contact:

Post by Kelsenellenelvian » Sun Nov 30, 2008 5:37 am

Yeah I got the memo :P

Post Reply