Siginet wrote:
I'm wondering... would it be possible to have DX Integrator automatically check true addons for the [SysPrepOC] section... and if the info does not exist it could automatically add it?
that is easy to do (I mean, do we hold now, if we want), but either way because actually preferred in windows vista-Win7 we do nothing, we have endless possibilities, and embarrass them choice to say about how to integrate or install an addon
, called this because the first idea was to directly read the [Sysoc] and read the section [Optional Components], and it was ok, but actually the addon windows XP are not all ok in vista-win7, so after we have miles to report problems ect ect ect, more from [SysPrepOC], we choose to use or SetupAPI AdvPack, all have two different options, use the AddService SetupAPI & RegisterDlls (widely used from us in the addon) instead AdvPack uses, RegisterOCXs & RunPreSetupCommands & RunPostSetupCommands ect ect, if we want to do this by reading the [Optional Components] and complicated, because Sysoc.dll and a file that includes all the two is both avdpack setupapi, and thus almost impossible to choose to use or advpack.dll setupapi.dll, such as an addon to Windows XP may have both inside and RegisterDlls RunPostSetupCommands, and in that chest if we choose to use the command "CCleaner = advpack.dll, LaunchINFSection, CCleaner. inf, CCleaner "the most RegisterDlls not work during installation, but if we use the command" Silverlight = setupapi.dll, InstallHinfSection, MSSlight.inf, Silverlight "the RunPostSetupCommands not work during installation, so it is very complicated in this chest, so used to force that user chooses to write as if his addon inf file or who use or advpack setupapi, after [SysPrepOC] is more advanced in the use of compressed and DXI INF Files for Multiple Platforms and Operating Systems , DXI install an addon where they are working according to the OS, as Windows Vista or Windows 7, X32 or X64 ect ect,
for example Dotnet4 True AddOn X32 for Windows XP-Windows 2003-Windows Vista-Windows 7
Code: Select all
[netfx40.6.1] ; Windows 7
CopyFiles = RefAssFmwk_x86.3643236F_FC70_11D3_A536_0090278A1BB8, ect ect ect ect
AddReg = Base.NETFX4.AddReg, NETFX40.Installer.AddReg
;AddService = clr_optimization_%URTVersion%_32,%NOCLOBBER_SERVICE%,CLR_Install
;AddService = WPFFontCache_v0400,%NOCLOBBER_SERVICE%,FontCache_Install
RunPostSetupCommands = ActionInstall6.1:1, Action_Install:1
[netfx40.6.0] ; Windows Vista
CopyFiles = RefAssFmwk_x86.3643236F_FC70_11D3_A536_0090278A1BB8, ect ect ect ect
AddReg = Base.NETFX4.AddReg, NETFX40.Installer.AddReg
;AddService = clr_optimization_%URTVersion%_32,%NOCLOBBER_SERVICE%,CLR_Install
;AddService = WPFFontCache_v0400,%NOCLOBBER_SERVICE%,FontCache_Install
RunPostSetupCommands = ActionInstall6.0:1, Action_Install:1
[ActionInstall6.1]
%11%\wusa.exe %10%\%MigrationFmwk%\Windows6.1-KB958488-v6001-x86.msu /quiet /norestart
[ActionInstall6.0]
%11%\wusa.exe %10%\%MigrationFmwk%\Windows6.0-KB956250-v6001-x86.msu /quiet /norestart
we almost thought of everything there
, I mean the [SysPrepOC] and as well as the user writes the same, because the only way we hold to be 100 % sure that after everything will be ok
Siginet wrote:
Plus if you need to extract other types of files there is a cmdline exe that is in the RVM Integrator I use for this process. It is called 7zdn.exe.
It can be found in the "Plugins\7zip" folder in a directory with the rvm integrator.
If you need cmdline info it is in the src code for the rvm integrator... which I think you have access to right?
I know about 7zip, but it was a choice so temporary use only cab model, since the idea is to mimic Microsoft's update, with more cab mod work even faster because when you add a addon DXI also takes the info, but either I know, the use 7zip dle and will be inevitable, but as mentioned, and only a temporary choice, after which the already told them there as an experience of 6 years with RVMI, and so easy to them, there just a few seconds, add code that uses RVMI
Siginet wrote:
Once DX Integrator is known to be fully functional it would be great to add cmdline capabilities to run it unattended. To allow people to create batch files to automate the process of creating an AIO win7 disk and so on.
there is still more there, his idea was to do them all, and we almost succeeded, why did not anything that a user can not do them, really can do it all everything, there are sections [ProcessesToRunBeforeIntegration ] and [ProcessesToRunAfterIntegration], them I'm already improving, now also know all these sections "dirid" since the default in this release that only the %mountdir% = windos 7 mount dir, and the %SourceFiles% = where directors and extract the addon
example entires.ini
Code: Select all
[ProcessesToRunBeforeIntegration]
%SourceFiles%\reshacker.exe comand ect ect %MountDir%\windows\system32\shel32.dll ect ect
reshacker.exe for example, and an included file in addon to use it to configure ect ect, and the goalscoring stakes before you can use the [SecurityFilesBeforeIntegration] and [SecurityFilesBeforeIntegration] to take the permissions of each file (since TrustedInstaller by default, not allows you to edit files), so they do whatever it wants
Siginet wrote:
And/Or use ini files to keep settings which people could Save/Load and even chain link together to automate processes like the rvm integrator can.
this option is not there, because the DXI, takes info from the update or addon, and then decide what to do ect ect, so it is a bit complicated, but we hold it, we just need a bit more time to review things well, so do it right
however, are certain things called as an option extra special, here is your specialty, so at a later time if you have time, maybe they'll add them yourself
(you to an already great experience with certain things in RVMi)
but either already in mind, that maybe an option to enable everyone to seek more, updating entire dvd of Windows 7, whether we have a good code structure, so do we place so that a user chooses the settings for a version of Windows 7, and once finished, the DXI after automatically mount-unmont all versions and update them all, ehhhh ask this a long time ehhhh maybe 10 hours, but if DXI will do everything automatically, perhaps it will be useful for everyone as a write access to the PC whole notes, so in the morning will find everything OK
but we need more time to review all well there, I wanted to dotnet4 addon I wanted to do for Windows 7 (90% already in fate), to me at 7 days of work, why do addon in windows7 take long, because there all the REG and almost protected, serve thousands of checks hmmmmmmmmm, idea was to release some addon as well as so everyone understands more later, but completely blocked here say, perhaps even Windows XP Update Pack I can not update this month
Ciao.
@ALL
Nonno Fabio and very busy, so lately I'm writing with the English google translator, but we hope that the ninth will come back online soon so make it all okay
Update (18 December 2014)
, not the past or to Nonno Fabio line before putting in those tools, because that is temporary, because I'm not yet finding the location of "Checking" in the MUI Win7, as the all-in Tool INTL but remain some parts still need to find the MUI Win7
I wish I was able to code a Win 7 tool. But my life seems to be very busy all the time. Every time I talk about doing a Win7 tool the real world gets in my way. 
