[Addon] XPSP3 QFE POSReady Updates 20180917
Re: [Addon] XPSP3 QFE POSReady Updates 20160112
Does this just remove the flash components that YOUR pack has, or both your POS and user_hidden's QFE pack?5eraph wrote:XPSP3_QFE_RemoveFlash_POSReady_Addon.7z [DETAILS]
Resultant Set of Changes: v20140812 through v20160121.
- If the POSReady addon were to be created from scratch today (2016-01-21), this is what the changelog would look like. (Without Flash Player)
Updates in orange indicate updates in user_hidden's XPSP3_QFE_UpdatePack, v20140812.
Updates in blood red indicate updates in user_hidden's XPSP3_QFE_UpdatePack, v20160112.
Additional update KB931125 updated from 2014-02 to 2016-01. (RootsUpd.exe)
Additional update KB2782798 added. (registry entry only)
High priority update KB2926765 replaced high priority update KB975713.
High priority update KB2957509 replaced high priority update KB2850869.
High priority update KB2961072 replaced high priority update KB2592799.
High priority update KB2962872 added. (browsewm.dll for IE6)
High priority update KB2991963 added.
High priority update KB2993254 added.
High priority update KB2998579 added.
High priority update KB3004361 added.
Additional update SA3009008 added. (registry entries only)
High priority update KB3011780 replaced high priority update KB2478971.
High priority update KB3019215 replaced additional update KB2264107.
Optional update KB3020338 replaced high priority update KB2802968.
High priority update KB3020393-v2 added.
High priority update KB3021674 added.
High priority update KB3023562 added.
High priority update KB3033395 replaced high priority update KB2859537.
High priority update KB3033889 replaced additional update KB2629462.
High priority update KB3033890 replaced high priority update KB2378111. (WMP 9)
High priority update KB3072630 replaced additional update KB967756. (MSI 4.5)
High priority update KB3072633 replaced high priority update KB2876217.
High priority update KB3073921 replaced high priority update KB2508429.
High priority update KB3076895 replaced high priority updates KB2757638 and KB2916036.
High priority update KB3080446 replaced high priority update KB2691442.
High priority update KB3081320 replaced additional update KB2832214.
High priority update KB3087039 replaced high priority update KB2847311.
High priority update KB3092601 replaced additional update KB2270406.
High priority update KB3108381 added.
High priority update KB3109094 replaced high priority updates KB2659262 and KB2834886. (GDI+ in WinSxS)- "Installed" registry entries for many updates are required to satisfy the Microsoft Update website:
Optional update KB3112148 replaced additional update KB2935092. (time zone)
High priority update KB3121918 replaced high priority update KB2836198.
Additional update SA3123040 replaced high priority update KB3050995. (RvkRoots.exe)
High priority update KB3124000 replaced high priority update KB2930275.
High priority update KB3124001 replaced high priority update KB2876331.
High priority update KB3124275 replaced high priority update KB2936068. (IE6 cumulative)
High priority update KB3124624 replaced high priority updates KB2510581 and KB2909212. (IE6)
Last edited by 5eraph on Thu Jan 21, 2016 6:13 pm, edited 1 time in total.
Awesome it is great5eraph wrote:Resultant Set of Changes: v20140812 through v20160112.
- If the POSReady addon were to be created from scratch today, this is what the changelog would look like. (Without Flash Player)
Updates in orange indicate updates in user_hidden's XPSP3_QFE_UpdatePack, v20140812.
Updates in blood red indicate updates in user_hidden's XPSP3_QFE_UpdatePack, v20160112.
Additional update KB931125 updated from 2014-02 to 2015-11. (RootsUpd.exe)
Additional update KB2782798 added. (registry entry only)
High priority update KB2926765 replaced high priority update KB975713.
High priority update KB2957509 replaced high priority update KB2850869.
High priority update KB2961072 replaced high priority update KB2592799.
High priority update KB2962872 added. (browsewm.dll for IE6)
High priority update KB2991963 added.
High priority update KB2993254 added.
High priority update KB2998579 added.
High priority update KB3004361 added.
Additional update SA3009008 added. (registry entries only)
High priority update KB3011780 replaced high priority update KB2478971.
High priority update KB3019215 replaced additional update KB2264107.
Optional update KB3020338 replaced high priority update KB2802968.
High priority update KB3020393-v2 added.
High priority update KB3021674 added.
High priority update KB3023562 added.
High priority update KB3033395 replaced high priority update KB2859537.
High priority update KB3033889 replaced additional update KB2629462.
High priority update KB3033890 replaced high priority update KB2378111. (WMP 9)
High priority update KB3072630 replaced additional update KB967756. (MSI 4.5)
High priority update KB3072633 replaced high priority update KB2876217.
High priority update KB3073921 replaced high priority update KB2508429.
High priority update KB3076895 replaced high priority updates KB2757638 and KB2916036.
High priority update KB3080446 replaced high priority update KB2691442.
High priority update KB3081320 replaced additional update KB2832214.
High priority update KB3087039 replaced high priority update KB2847311.
High priority update KB3092601 replaced additional update KB2270406.
High priority update KB3108381 added.
High priority update KB3109094 replaced high priority updates KB2659262 and KB2834886. (GDI+ in WinSxS)High priority update KB3109560 replaced high priority update KB2929961.
- "Installed" registry entries for many updates are required to satisfy the Microsoft Update website:
Optional update KB3112148 replaced additional update KB2935092. (time zone)
High priority update KB3121918 replaced high priority update KB2836198.
Additional update SA3123040 replaced high priority update KB3050995. (RvkRoots.exe)
High priority update KB3124000 replaced high priority update KB2930275.
High priority update KB3124001 replaced high priority update KB2876331.
High priority update KB3124275 replaced high priority update KB2936068. (IE6 cumulative)
High priority update KB3124624 replaced high priority updates KB2510581 and KB2909212. (IE6)
Updated to 20160123:
- Updated Adobe Flash to v20.0.0.286 from v20.0.0.270.
Updated to 20160131:
- Additional update KB931125 (rootsupd.exe) updated to v1603.
You're welcome. 
Updated to 20160209. Please read the Changelog for full details.
IE6 is no longer receiving updates and should be considered extremely vulnerable. I'd highly recommend slipstreaming IE7 or IE8, or using an IE8 addon.

Updated to 20160209. Please read the Changelog for full details.
IE6 is no longer receiving updates and should be considered extremely vulnerable. I'd highly recommend slipstreaming IE7 or IE8, or using an IE8 addon.
- user_hidden
- Posts: 1924
- Joined: Thu Dec 06, 2007 7:52 am
- Location: Canada eh!
Hi All: I would just like to thank everyone here for there continued efforts to keep XP Alive!
_________________________________________________
Here Are my collection of XP files that you can download.
i will update them when i can.
https://mega.nz/#F!8nY0iBLK!JEwKcH9mYYy16iOuUrExyw
_________________________________________________
Here Are my collection of XP files that you can download.
i will update them when i can.
https://mega.nz/#F!8nY0iBLK!JEwKcH9mYYy16iOuUrExyw
Hi 5eraph ..
i tried your XPSP3_QFE_POSReady_Addon_20160308_5er
at a few attempts using this with nLite i was quite amazed i kept getting this same error and was just wondering if anyone else had same thing happen.
http://s22.postimg.org/g80givfdd/POSRea ... _ERROR.jpg
ive used your addons before and dont normally get any errors at all
i used a clean xp pro sp3 version .. addons i used
XPSP3_QFE_EnablePOSReadyMU_Addon
XPSP3_QFE_POSReady_Addon_20160308_5er
XPSP3_QFE_UpdatePack_20160308
YumeYao_IE8_Addon_Nosetuperr_ENU_1.5.18
YumeYao_WMP11_Addon_ENU_V3_4_7
i tried your XPSP3_QFE_POSReady_Addon_20160308_5er
at a few attempts using this with nLite i was quite amazed i kept getting this same error and was just wondering if anyone else had same thing happen.
http://s22.postimg.org/g80givfdd/POSRea ... _ERROR.jpg
ive used your addons before and dont normally get any errors at all
i used a clean xp pro sp3 version .. addons i used
XPSP3_QFE_EnablePOSReadyMU_Addon
XPSP3_QFE_POSReady_Addon_20160308_5er
XPSP3_QFE_UpdatePack_20160308
YumeYao_IE8_Addon_Nosetuperr_ENU_1.5.18
YumeYao_WMP11_Addon_ENU_V3_4_7
I can't reproduce your error, dudeuk.
user_hidden's update pack must be listed above the POSReady addon. This is not reflected in the order you provided above. The file won't be found if the update pack is not integrated first.
If the order is correct, there is another theory: This addon makes many edits to qfeUpPck.inf. It has been proven with other addons that some antivirus products will temporarily lock files to scan them after each edit. This can cause errors like yours. In this case, try temporarily disabling your AV to run nLite.
user_hidden's update pack must be listed above the POSReady addon. This is not reflected in the order you provided above. The file won't be found if the update pack is not integrated first.
If the order is correct, there is another theory: This addon makes many edits to qfeUpPck.inf. It has been proven with other addons that some antivirus products will temporarily lock files to scan them after each edit. This can cause errors like yours. In this case, try temporarily disabling your AV to run nLite.
I see you're using the EnablePOSReadyMU addon. It has been updated due to the change in detection MU now uses.
The new addon also removes the following line from qfeUpPck.inf:
The new addon also removes the following line from qfeUpPck.inf:
HKLM,"SYSTEM\CurrentControlSet\Control\WindowsEmbedded\ProductVersion","FeaturePackVersion",0x00000000,"SP3"
Hmmm, I didn't realize u_h was adding that key since support for SP3 embedded ended sooner than posready. I would think only the longer lasting key would have been enough.
Anyway, now you are not alone not understanding why this key was not applied.
I will check on the next install. My last build was in September so maybe one of the WU updates between now and then removed the key.
Anyway, now you are not alone not understanding why this key was not applied.

compiled new xp iso today..
added first and let that process
XPSP3_QFE_UpdatePack_20160308
YumeYao_IE8_Addon_Nosetuperr_ENU_1.5.18
YumeYao_WMP11_Addon_ENU_V3_4_7
added second and let that process
XPSP3_QFE_EnablePOSReadyMU_Addon
XPSP3_QFE_POSReady_Addon_20160308_5er
worked out ok this time..
normally i just add all addons and it gets on with it ok
but from now on ill do it separately
added first and let that process
XPSP3_QFE_UpdatePack_20160308
YumeYao_IE8_Addon_Nosetuperr_ENU_1.5.18
YumeYao_WMP11_Addon_ENU_V3_4_7
added second and let that process
XPSP3_QFE_EnablePOSReadyMU_Addon
XPSP3_QFE_POSReady_Addon_20160308_5er
worked out ok this time..
normally i just add all addons and it gets on with it ok
but from now on ill do it separately
yes i added lastest XPSP3_QFE_EnablePOSReadyMU_Addon_20160311
many thanks...
many thanks...
Hi All: I would just like to thank everyone here for there continued efforts to keep XP Alive!
_________________________________________________
Here Are my collection of XP files that you can download.
i will update them when i can.
https://mega.nz/#F!8nY0iBLK!JEwKcH9mYYy16iOuUrExyw
_________________________________________________
Here Are my collection of XP files that you can download.
i will update them when i can.
https://mega.nz/#F!8nY0iBLK!JEwKcH9mYYy16iOuUrExyw
@dudeuk
this the correct order my dear
XPSP3_QFE_UpdatePack_20160308
XPSP3_QFE_POSReady_Addon_20160308_5er
XPSP3_QFE_EnablePOSReadyMU_Addon
YumeYao_IE8_Addon_Nosetuperr_ENU_1.5.18
YumeYao_WMP11_Addon_ENU_V3_4_7
otherwise it will cause few nice problems as qfe updatepacks(both 5eraph and U_H) will replace wmp11 and ie8 files with ie6 and wmp9
this the correct order my dear
XPSP3_QFE_UpdatePack_20160308
XPSP3_QFE_POSReady_Addon_20160308_5er
XPSP3_QFE_EnablePOSReadyMU_Addon
YumeYao_IE8_Addon_Nosetuperr_ENU_1.5.18
YumeYao_WMP11_Addon_ENU_V3_4_7
otherwise it will cause few nice problems as qfe updatepacks(both 5eraph and U_H) will replace wmp11 and ie8 files with ie6 and wmp9
About Pack
Hi All: user_hidden and 5eraph I would just like to thank you for your continued efforts great job and hard work and time. 
Sorry 5eraph my mistake but I still Thank You both.

Sorry 5eraph my mistake but I still Thank You both.
Last edited by Stormit on Wed Mar 16, 2016 3:12 pm, edited 2 times in total.
- user_hidden
- Posts: 1924
- Joined: Thu Dec 06, 2007 7:52 am
- Location: Canada eh!
Re: About Pack
thank you but it's really 5eraph that has been updating POSReady updates for adding to my update pack.Stormit wrote:Hi All: user_hidden I would just like to thank you for your continued efforts great job and hard work and time.
ive tried this a few times now with nlite..Dibya wrote:@dudeuk
this the correct order my dear
XPSP3_QFE_UpdatePack_20160308
XPSP3_QFE_POSReady_Addon_20160308_5er
XPSP3_QFE_EnablePOSReadyMU_Addon
YumeYao_IE8_Addon_Nosetuperr_ENU_1.5.18
YumeYao_WMP11_Addon_ENU_V3_4_7
otherwise it will cause few nice problems as qfe updatepacks(both 5eraph and U_H) will replace wmp11 and ie8 files with ie6 and wmp9
stage 1
used nlite to add
XPSP3_QFE_UpdatePack_20160308
stage 2
used nlite to add
XPSP3_QFE_POSReady_Addon_20160308_5er
XPSP3_QFE_EnablePOSReadyMU_Addon_20160311
stage 3
used nlite to add
YumeYao_IE8_Addon_Nosetuperr_ENU_1.5.18
YumeYao_WMP11_Addon_ENU_V3_4_7
when tested i get two WEPOS & POSReady updates to download in windows updates online KB3067903 & KB3033890
ill be trying RyanVM Integrator next rather than nlite to see if that has any better effect..
edit
tried same addons in same order but using RyanVM Integrator adding one addon at a time to intergrate
when tested i get three WEPOS & POSReady updates to download in windows updates online KB3067903 & KB3033890 & KB3140410
Last edited by dudeuk on Wed Mar 16, 2016 3:32 pm, edited 2 times in total.
dear adric
regentries for KB3139398 already there in the inf file of 5eraph . It should not happen
[KB3139398.AddReg]
HKLM,"%SP4REG%\KB3139398","Description",0,"%SUPD% (KB3139398)"
HKLM,"%SP4REG%\KB3139398","InstalledBy",0,"%NAME%"
HKLM,"%SP4REG%\KB3139398","InstalledDate",0,"%UPVER%"
HKLM,"%SP4REG%\KB3139398","Type",0,"Update"
HKLM,"%SP4REG%\KB3139398\Filelist\0","BuildCheckSum",0,"d332"
HKLM,"%SP4REG%\KB3139398\Filelist\0","BuildDate",0,"Fri Jan 29 14:11:23 2016"
HKLM,"%SP4REG%\KB3139398\Filelist\0","FileName",0,"usbstor.sys"
HKLM,"%SP4REG%\KB3139398\Filelist\0","Location",0,"%10%\Driver Cache\i386"
HKLM,"%SP4REG%\KB3139398\Filelist\0","Version",0,"5.1.2600.7012"
HKLM,"%HFREG%\KB3139398","Backup Dir",0,""
HKLM,"%HFREG%\KB3139398","Comments",0,"%SUPD% (KB3139398)"
HKLM,"%HFREG%\KB3139398","Fix Description",0,"%SUPD% (KB3139398)"
HKLM,"%HFREG%\KB3139398","Installed",0x10001,1
HKLM,"%HFREG%\KB3139398","Installed By",0,"%NAME%"
HKLM,"%HFREG%\KB3139398","Installed On",0,"%UPVER%"
HKLM,"%HFREG%\KB3139398","Service Pack",0x10001,4
HKLM,"%HFREG%\KB3139398","Valid",0x10001,1
HKLM,"%HFREG%\KB3139398\File 1","Flags",0,""
HKLM,"%HFREG%\KB3139398\File 1","New File",0,""
HKLM,"%HFREG%\KB3139398\File 1","New Link Date",0,""
HKLM,"%HFREG%\KB3139398\File 1","Old Link Date",0,"
regentries for KB3139398 already there in the inf file of 5eraph . It should not happen
[KB3139398.AddReg]
HKLM,"%SP4REG%\KB3139398","Description",0,"%SUPD% (KB3139398)"
HKLM,"%SP4REG%\KB3139398","InstalledBy",0,"%NAME%"
HKLM,"%SP4REG%\KB3139398","InstalledDate",0,"%UPVER%"
HKLM,"%SP4REG%\KB3139398","Type",0,"Update"
HKLM,"%SP4REG%\KB3139398\Filelist\0","BuildCheckSum",0,"d332"
HKLM,"%SP4REG%\KB3139398\Filelist\0","BuildDate",0,"Fri Jan 29 14:11:23 2016"
HKLM,"%SP4REG%\KB3139398\Filelist\0","FileName",0,"usbstor.sys"
HKLM,"%SP4REG%\KB3139398\Filelist\0","Location",0,"%10%\Driver Cache\i386"
HKLM,"%SP4REG%\KB3139398\Filelist\0","Version",0,"5.1.2600.7012"
HKLM,"%HFREG%\KB3139398","Backup Dir",0,""
HKLM,"%HFREG%\KB3139398","Comments",0,"%SUPD% (KB3139398)"
HKLM,"%HFREG%\KB3139398","Fix Description",0,"%SUPD% (KB3139398)"
HKLM,"%HFREG%\KB3139398","Installed",0x10001,1
HKLM,"%HFREG%\KB3139398","Installed By",0,"%NAME%"
HKLM,"%HFREG%\KB3139398","Installed On",0,"%UPVER%"
HKLM,"%HFREG%\KB3139398","Service Pack",0x10001,4
HKLM,"%HFREG%\KB3139398","Valid",0x10001,1
HKLM,"%HFREG%\KB3139398\File 1","Flags",0,""
HKLM,"%HFREG%\KB3139398\File 1","New File",0,""
HKLM,"%HFREG%\KB3139398\File 1","New Link Date",0,""
HKLM,"%HFREG%\KB3139398\File 1","Old Link Date",0,"
Those two updates are specific to WMP11, and beyond the scope of the POSReady addon. Tried my hand at updating YumeYao's WMP addons. Turns out that YumeYao's WMP addons don't work so well when integrated with the POSReady addon.dudeuk wrote:YumeYao_WMP11_Addon_ENU_V3_4_7
when tested i get two WEPOS & POSReady updates to download in windows updates online KB3067903 & KB3033890
adric wrote:Windows Update reoffering KB3139398 after fresh install with latest u_h and PosReady packs. Anyone else noticing this?
If the problem is what I think it is then I'll need to test on bare metal (not in virtual machine). Give me some time to work on it.Dibya wrote:It should not happen
Need more information, adric. Are you using RVMi, or nLite? Are you integrating the update pack and the POSReady addon at the same time?
I ask because usbstor.sys needs to be updated in driver.cab. The CAB file is only updated in RVMi when an update pack is integrated in the current session. The addon must be integrated at the same time as the update pack when using RVMi.
I ask because usbstor.sys needs to be updated in driver.cab. The CAB file is only updated in RVMi when an update pack is integrated in the current session. The addon must be integrated at the same time as the update pack when using RVMi.
I don't use nlite, only RVMI. I always run a windows update (web) check after completing and customizing the install. At the time, MU did not show any outstanding fixes. the KB seems to have reappeared since yesterday. This is what I installed. Update Pack first, then another run with Addons
Code: Select all
[AddonPacks]
Addon_DirectX32_9.0c_Runtimes_201006.7z=Z:\$XPi\@Addons
Kels_Runtimes_addon_v8.8.rar=Z:\$XPi\@Addons
Ricks-YumeYao_MicrosoftVC7891012RuntimeLibraries_MixedAddon_2_2_3.7z=Z:\$XPi\@Ad
MassStorageAddons_IaStor_8.9.2.1002.7z=Z:\$XPi\@Addons
RogueSpearAddonsM2-XPSP3-NoKtD_8.09.7z=Z:\$XPi\@Addons
XPSP3_QFE_EnablePOSReadyMU_Addon.7z=Z:\$XPi\@Addons
XPSP3_QFE_POSReady_Addon_20160308_5er.7z=Z:\$XPi\@Addons
YumeYao_WMP11_Addon_ENU_v3.5.1.7z=Z:\$XPi\@Addons
YumeYao_IE8_Addon_Nosetuperr_ENU_1.5.18.7z=Z:\$XPi\@Addons
That may be it. I've always run the update pack and Addons as separate runs. Looks like I still have an old version of the usbstor.sys Not sure why this did not show up when I first checked with MU5eraph wrote:Need more information, adric. Are you using RVMi, or nLite? Are you integrating the update pack and the POSReady addon at the same time?
I ask because usbstor.sys needs to be updated in driver.cab. The CAB file is only updated in RVMi when an update pack is integrated in the current session. The addon must be integrated at the same time as the update pack when using RVMi.
Code: Select all
filever C:\WINDOWS\system32\drivers\USBSTOR.SYS
--a-- W32i DLL ENU 5.1.2600.5512 shp 26,368 04-14-2008 usbstor.sys