RyanVM Update Pack 2.1.1 - Released August 14, 2006

Post by **RyanVM** » Wed Aug 16, 2006 2:06 pm

You know, it's very frustrating when people say things along the lines of "This is the only thing I've changed" when that's not accurate. I'm not psychic. If you don't provide all of the information up front, I can't be expected to provide any useful help.

biatche · Post by **biatche** » Wed Aug 16, 2006 3:15 pm

it just seem to be that... kel's stuff tend to be nice... but somehow not up to best quality, and i've seen times he updated some files without changing the version too..

i know ive blamed rvm for wrong reasons at times hehe sorry man.

Post by **5eraph** » Wed Aug 16, 2006 8:03 pm

Incremental testing is key, as I've learned the hard way. Takes longer, but it prevents you from looking like an a$$ later when placing blame at the wrong person's feet.

biatche · Post by **biatche** » Thu Aug 17, 2006 12:14 am

ya, the problem is just as u said it takes longer

molenin · Post by **molenin** » Thu Aug 17, 2006 4:45 am

Can I integrate new Update pack over Nlited installation with previous pack, and Bashrat's drivers packs using Ryan's Integrator?

buletov · Post by **buletov** » Thu Aug 17, 2006 5:26 am

Try, but don't expect much of a success.

Post by **RyanVM** » Thu Aug 17, 2006 9:04 am

molenin wrote:Can I integrate new Update pack over Nlited installation with previous pack, and Bashrat's drivers packs using Ryan's Integrator?

The answer to that question is at the very top of the directions page, you know.

molenin · Post by **molenin** » Thu Aug 17, 2006 2:37 pm

I am using Ryan's Update packs for a long time.
And I never had problems with it... But with 2.1.1 version I can't use my LIP(stripped MS Windows MUI).
I am using Nlite 1.0.1 as usual, I am trying Integrator 1.4.1 - no way...

EventLog:

Code: Select all

Event Type:	Error
Event Source:	SideBySide
Event Category:	None
Event ID:	55
Date:		17.08.2007
Time:		18:40:46
User:		N/A
Computer:	4CC6E6A3EFA34C3
Description:
The signer Microsoft Corporation of the assembly C:\WINDOWS\MUI\FALLBACK\0419\ASMS\60100\msft\windows\common\controls\controls.cat was too short - minimal key length is 2048 bits.

Intall Log:

Code: Select all

Action 18:40:46: CA23D. Installing Common Controls support
CA23D: Please wait...
CA23D Assembly Installation of C:\WINDOWS\MUI\FALLBACK\0419\ASMS failed. Please refer Eventlog for more information. Error: 14075
Action ended 18:40:46: InstallFinalize. Return value 3.
Action 18:40:46: Rollback. Rolling back action:

Only UpdatePack was changed in my installation... Help me please.

avneet25 · Post by **avneet25** » Thu Aug 17, 2006 3:25 pm

Update for Windows XP (KB920872) came out

Post by **RyanVM** » Thu Aug 17, 2006 4:20 pm

And you felt the need to triple post that why? You know, there's a big thread specifically dedicated to post-SP2 hotfixes...

molenin · Post by **molenin** » Thu Aug 17, 2006 4:37 pm

Sorry, RyanVM, I don't understand you

Post by **RyanVM** » Thu Aug 17, 2006 4:41 pm

molenin wrote:Sorry, RyanVM, I don't understand you

...I wasn't talking to you

boooggy · Post by **boooggy** » Thu Aug 17, 2006 4:43 pm

he meant that u post to many time about this fix...
and that thread where u should post is here: http://www.ryanvm.net/forum/viewtopic.php?t=62

ukulele · Post by **ukulele** » Thu Aug 17, 2006 5:08 pm

I have the same problem as asm51 (but noone answered him yet): "No entries*.ini found, exiting" error comes up during integration.

Any ideas please?

EDIT: Solved, I haven't searched forums thoroughly, it was space and "_" in folder name

Sorry for useless post.

molenin · Post by **molenin** » Thu Aug 17, 2006 5:28 pm

I tried to use "optimized" russian LIP. There was a mistakes, but all interface(80-90%) was russian in previous packs.
But 2.1.1 give me 20-30% of localization.

a06 · Post by **a06** » Thu Aug 17, 2006 7:57 pm

Hi Ryan,

Just wanted to say thanks for the great update pack, once again.

Integration (using integrator - why does anyone use anythign else?!) went smoothly, as did installation.

When I went to MU, I saw this:

Security Update for Microsoft .NET Framework, Version 2.0 (KB917283)
Security Update for Windows XP (KB917953)

Other than that, all looks well!
Thanks!

cyberloner · Post by **cyberloner** » Thu Aug 17, 2006 8:01 pm

check your .net installation file...
it is updated..... in 1st page.....

Vista · Post by **Vista** » Fri Aug 18, 2006 12:57 am

Hello,
can i use RVM Pack 2.1.1 with WinXP MCE 2005 ?

if yes, what software to use when integrating ?
(nlite, RVM Integrator)

Thank you

tbone2 · Post by **tbone2** » Fri Aug 18, 2006 2:10 am

Sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeet works like a carm

cyberloner · Post by **cyberloner** » Fri Aug 18, 2006 5:24 am

yea works like super to me too... everything updated... check microsoft windows update site... everything is fully updated......... feel safe to online with ryan pack =)

winguy · Post by **winguy** » Fri Aug 18, 2006 6:24 am

cyberloner wrote:yea works like super to me too... everything updated... check microsoft windows update site... everything is fully updated......... feel safe to online with ryan pack =)

So 2.1.1 includes KB892130 too?

Post by **RyanVM** » Fri Aug 18, 2006 6:53 am

WGA is a seperate addon

hakab · Post by **hakab** » Fri Aug 18, 2006 1:37 pm

Ryan, what about KB920872 and KB909095? Would be nice to have them before mid-September

.

buletov · Post by **buletov** » Fri Aug 18, 2006 3:44 pm

Give him a break, man... he is doing so much for us!

biatche · Post by **biatche** » Fri Aug 18, 2006 3:59 pm

it'd be good to see a 2.1.1a with the minor updates, dont think ti should take that long to update, right/

the_guy · Post by **the_guy** » Fri Aug 18, 2006 4:16 pm

hakab wrote:Ryan, what about KB920872 and KB909095? Would be nice to have them before mid-September .

To have 920872, you just need to make an addon for it. 909095 is replaced by a newer hotfix which is included in the update pack.

the_guy

Post by **RyanVM** » Fri Aug 18, 2006 5:04 pm

I'm already doing over 100GB of transfer a day for a week after a new release. I'm not going to do another release a week later for an update that I highly doubt affects most people on this board.

the_guy · Post by **the_guy** » Fri Aug 18, 2006 6:04 pm

Makes sense Ryan. I was just saying that hakab should just get someone to make an addon for that update. In my opinion, the only reason why a re-release would be necessary is if there were corrupted files. Maybe not, though.

the_guy

RogueSpear · Post by **RogueSpear** » Fri Aug 18, 2006 6:33 pm

Anyone is free to make their own addon pack if they're so inclined.

creep in the cellar · Post by **creep in the cellar** » Fri Aug 18, 2006 8:30 pm

It amazes me how many people can be so ungrateful. Ryan takes his personal time to make packs and people still are not satisfied. Truthfully I am disgusted with the way people take this for granted. What would all the people do if this board went away? People packs come every month when he has the time to do it. Leave it at that, damn. Pay atttention and you will see if there are circumstances that prevent Ryan from making the pack when updates come, he will let us know. Funny that there is so much info and new programs now that we can make our own addons. Sorry to Ryan, mods and all the contributors to this forum, I had to express myself. This lack of respect has really been annoying. Telling like it is.

Mavericks choice · Post by **Mavericks choice** » Fri Aug 18, 2006 9:53 pm

Yes very spoilt. But we should get back on topic though.

Cheers
MC.

biatche · Post by **biatche** » Sun Aug 20, 2006 10:53 am

oh very sorry to suggest, i just remember once there was an update pack mini-patch "version x.y.za".... so i thought the same could be done now, doesnt matter though... i respect ryan's work a lot, it has made my life a lot easier.

qeraser · Post by **qeraser** » Fri Aug 25, 2006 2:47 am

I stand by every word of what molenin wrote. May be poltergeist

, and in the new version of pack all will be ok.

slobodan · Post by **slobodan** » Sat Aug 26, 2006 3:11 am

I see you can D/l both the latest update pack and the integrator from softpedia.
Could perhaps lessen the burden on Ryan's server..

RyanVM Update Pack 2.1.1
http://download.softpedia.com/software/ ... ck2.1.1.7z
http://download.softpedia.ro/software/O ... ck2.1.1.7z

RVM Integrator 1.4.1
http://download.softpedia.com/software/ ... _1.4.1.exe
http://download.softpedia.ro/software/O ... _1.4.1.exe

Post by **RyanVM** » Sat Aug 26, 2006 1:39 pm

Meh, my bandwidth is actually holding up really well this month (and I've got three mirrors in reserve if I need them)

Us2002 · Post by **Us2002** » Thu Sep 07, 2006 10:03 am

2 Ryan

Are these updetes included in your pack?

KB885523, KB891781, KB894391, KB899587, KB900725, KB902400, KB904706, KB908521, KB914389

If it is, why they not showed in http://www.ryanvm.net/msfn/updatepack.html
if not, why not included

Thanks.

Post by **RyanVM** » Thu Sep 07, 2006 10:19 am

Updates get superseded over time. Without checking those updates specifically, my bet is that they're included by the fact that I include an update with a later version of the affected files. The best way to check is to compare the file versions from the KB articles to the ones included in my pack. If they're the same or newer, yes, they're included.

I don't put superseded fixes on the main Update Pack page due to space considerations.

chiners_68 · Post by **chiners_68** » Wed Sep 13, 2006 6:01 am

During install with 2.1.1 update pack im now getting the plug & play monitor window apear which needs manual imput. If I recall this was due to a previous microsoft update. is there a fix so this dosent apear or do i have to wait for an updated pack..?
Previous pack I usesd possibly 2.0.X didnt have this issue.

issue is with the intel 82915G/GV/910GL chipset. on a dell gx520.

cheers

biatche · Post by **biatche** » Sat Sep 16, 2006 8:23 pm

yeah yeah i know.. when its ready.. but ill ask this... are there any plans on making a 2.1.2 this month? im gonna format my own pc soon. thinking whether to wait for 2.1.2 or just use 2.1.1

ricktendo64 · Post by **ricktendo64** » Sat Sep 16, 2006 8:32 pm

Didnt you hear... RyanVM was sold on Ebay for $10.50

Just kidding...

Hes on Vacation

RyanVM wrote:I'll be home on Sunday the 17th and will work on updating the pack then.

Post by **RyanVM** » Sun Sep 17, 2006 1:29 pm

biatche wrote:yeah yeah i know.. when its ready.. but ill ask this... are there any plans on making a 2.1.2 this month? im gonna format my own pc soon. thinking whether to wait for 2.1.2 or just use 2.1.1

You know, announcements are there for a reason...

Post by **RyanVM** » Sun Sep 17, 2006 9:05 pm

2.1.2 is out

RyanVM.net Discussion Board

RyanVM Update Pack 2.1.1 - Released August 14, 2006

GREAT