RyanVM Update Pack 2.1.8 - Released March 20, 2007

Questions about Update Pack making? Ask here.
User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Fri Mar 23, 2007 10:00 am

Dude, the thread on that matter is like three down from this one.
http://www.ryanvm.net/forum/viewtopic.php?t=4505
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

User avatar
MrNxDmX
Moderator
Posts: 3112
Joined: Mon Jan 03, 2005 7:33 am

Post by MrNxDmX » Fri Mar 23, 2007 7:26 pm

Siginet wrote:Dude... joking about viruses on a site like this is not funny. 2.1.9 would be out in approximately 3 weeks. We release just after microsoft releases new hotfixes. So if you are thinking there are so many releases because the UpdatePack is buggy... you're strongly mistaken. It's been pretty bug free for quite a long time now.
Agreed.
I dont see any virus here, also dont remember any buggy update pack till a looong time.
Thanks for another complete release.

Broly10000
Posts: 53
Joined: Fri Dec 22, 2006 1:41 pm

Post by Broly10000 » Fri Mar 23, 2007 9:33 pm

HI. Great work your doing with your update packs and the integrator.I've been doing integrations since november and everything went fine until today. I still dont know what update pack is cousing this cause i havent tested every update pack individualy but I will soon. The instalation is telling me there's missing files in the XP CD(Virtual PC 2007, Also installed vista with it and everything went fine). The files are the following:

rio8drv.sys
riodrv.sys
tosdvd.sys
paqsp.dll
modem.sys
swenum.sys
pjlmon.dll
mssmbios.sys
pid.dll
sonydcam.sys
stream.sys

After that it follows with a stop error:
IRQL_NOT_LESS_OR_EQUAL
sTOP: 0x0000000A (0x00000014, 0x00000002, 0x00000000, 0x808244c6)

The order of my integrations is:

RVMUpdatePack2.1.8.7z
RVMAddonsWGAN_1.7.18.1.7z
RVMAddonsDX9_1.2.7z
wmp11slips0.6i.exe
NR_IE7en_Addon_1.0.2.7z

Everything downloaded yesterday and MD5 checked with digestIT 2004. I integrated the packs in that order closing the integrator after every pack, then build the iso with magicISO as always.

The integrator tells me everything went fine. I dont know what else to do. I hope someone find the problem. I'm thinking it could be the IE7 pack and the 2.8.7 update pack not being compatible.

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Fri Mar 23, 2007 10:00 pm

The "missing" files indicate to me that you've got a corrupted driver.cab. I'd start there if I were you.
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

Broly10000
Posts: 53
Joined: Fri Dec 22, 2006 1:41 pm

Post by Broly10000 » Fri Mar 23, 2007 10:08 pm

OK, I tested with only the 2.8.7 update pack and now it says the following files are missing:

Shell32.dll
amdk6.sys
amdk7.sys
arp1394.sys

No blue screen this time. I dont know what it is, but it isnt the machine cause on march 3 07 i did another updated instalation and i'm using it right now to write post. Same integration order same integrator and magic iso and the same virtual machine.I'm sending the log.

23-03-2007 21¦16¦10
Log Startup @ 21:16:10 On 23-03-2007

21:16:10 - System Running: WIN_XP Service Pack 2
21:16:10 - RVMIntegrator v1.4.3
21:16:10 - J:\Tools\RyanVM.net\RVM_Integrator_1.4.3.exe
21:16:19 - Windows XP Professional - Corporate SP2 Found
21:16:26 -
21:16:26 - Source Drive = J:\XPCD\WXPVOL_EN
21:16:26 - Destination Drive = J:\XPCD\WXPVOL_EN
21:16:26 - Destination Size = 6299.3125
21:16:26 - Working Directory = J:\XPCD\WXPVOL_EN\I386
21:16:26 - Temp Directory = J:\XPCD\WXPVOL_EN\I386\rvmtemp
21:16:27 -
21:16:27 - Starting Integration
21:16:27 -
21:16:27 - Checking Destination For OS Type.
21:16:27 - Windows XP Professional - Corporate SP2 Found
21:16:27 - Clearing any Read Only Attributes.
21:16:34 -
21:16:36 - Extracting RVMUpdatePack2.1.8.7z
21:16:36 - MD5 Hash = 1f13095d2c018b3de4f6897736f4fedf
21:17:07 -
21:17:07 - Gathering temp files
21:17:07 - Expanding driver.cab
21:19:12 - Expanding SP2.cab
21:19:47 - Copying files for driver.cab repackaging.
21:19:48 - Moving files for driver.cab repackaging.
21:19:48 - Integrating XP Professional Files.
21:19:49 - Compressing Files
21:23:30 - Shifting Stuff Around
21:23:30 -
21:24:08 - Analyzing 1 Entry Files
21:24:08 - Processing RyanVM Update Pack v2.1.8 Build Date: 03/20/2007
21:24:14 - obsolete_files Found in entries.ini
21:24:15 - Processing Sysoc.inf
21:24:15 - Adding Components
21:24:15 - Processing svcpack.inf
21:24:15 - removing obsolete hotfixes
21:24:15 - adding ProductCatalogsToInstall
21:24:15 - Processing dosnet.inf
21:24:15 - Modifying any SP2.cab areas in dosnet.inf
21:24:15 - Editing [Files]
21:24:15 - Editing [Files] - XP Professional Only
21:24:16 - Processing txtsetup.sif
21:24:16 - Editing [Fileflags]
21:24:16 - Editing [WinntDirectories]
21:24:16 - Editing [SourceDisksFiles]
21:24:17 - Editing [SourceDisksFiles] - XP Professional Only
21:24:17 - Modifying any SP2.cab areas in txtsetup.sif
21:24:27 - Entire .ini Processing Completed in 19 Seconds
21:24:27 - Compressing and Moving Edited Files
21:24:27 -
21:24:27 - Processing mmssetup.cab
21:24:27 - Expanding mmssetup.cab
21:24:28 - Processing entries.ini
21:24:28 - Rebuilding mmssetup.cab
21:24:30 - Rebuilding mmssetup.cab Complete.
21:24:30 -
21:24:31 -
21:24:31 - Calculating the amount of files to pack into driver.cab
21:24:43 - Rebuilding driver.cab
21:32:43 - Rebuilding drvindex.inf
21:32:43 - Rebuilding drvindex.inf Complete.
21:32:43 - Moving Files
21:32:43 - Cleaning Up.
21:32:43 - Replacing driver.cab
21:33:02 - Integration is at 100%, Cleaning Up
21:33:07 - Integration Completed.
21:33:07 - Total Integration Time = 999 Seconds
21:33:07 - ==================================================================================
21:33:07 -

Log Shutdown @ 21:44:33 On 23-03-2007


PS. Forgot to say that all the files WXP setup complains about are in the disk (Driver.cab)

User avatar
mr_smartepants
Posts: 824
Joined: Thu May 18, 2006 5:56 am
Location: Cambridgeshire, UK

Post by mr_smartepants » Sat Mar 24, 2007 2:59 am

Are you integrating over a 'clean' or 'dirty' source?
Try burning your CD at a slower speed **edit** disregard, just noticed you used VPC2k7.

Submariner
Posts: 9
Joined: Fri Aug 26, 2005 3:21 am

Post by Submariner » Sat Mar 24, 2007 8:57 am

What have I done wrong? When I try to download, I get:
Forbidden
You don't have permission to access /files/RVMUpdatePack2.1.8.7z on this server.

Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
No download manager, just IE6.

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Sat Mar 24, 2007 9:41 am

Read the site FAQ
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

User avatar
Zyx_Maiden
Posts: 128
Joined: Mon Mar 12, 2007 9:32 pm
Location: Québec, Canada

Post by Zyx_Maiden » Sun Mar 25, 2007 12:46 am

Hi Guys, I have integrated the latest RMVUpdatepack2.1.8.7 + dotnet3fx_addon with a few other things... All goes very well. Windows install itself without any error. But when I go to WU and try to install .Net 3.0 (KB928416) the installation fail. :rolleyes:

Here is the log it give me:

Code: Select all

[03/24/07,23:43:57] MSXML 6.0 Parser: [2] Error - file does not exist: c:\b0b97594b8466e8c6e\.\wcu\msxml\msxml6.msi
[03/24/07,23:43:57] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[03/24/07,23:43:59] MSXML 6.0 Parser: [2] Error - file does not exist: c:\b0b97594b8466e8c6e\.\wcu\msxml\msxml6.msi
[03/24/07,23:43:59] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[03/24/07,23:43:59] WapUI: [2] DepCheck indicates MSXML 6.0 Parser is not installed.
:idea: It also open a web page to Microsoft site for Microsoft .NET Framework 3.0 Redistributable Package. So I try donwloading the X86 Redist Package called dotnetfx3.exe (50mb) and tried to install. This time the installation worked without error or problem. :shock:


Here is the Complete list of packages being integrated:

Code: Select all

Extract Source Files From Windows XP PRO SP2 English OEM CD

Use RVM integrator for CXP_AddOnSuppress_CD_TABLETPC
                       CXP_AddOnSuppress_CD_UPWIN9x
                       CXP_AddOnSuppress_CD_UPWINNT
                       CXP_AddOnSuppress_games
                       CXP_AddOnSuppress_igames
                       CXP_AddOnSuppress_msmsgs
                       CXP_AddOnSuppress_msnmsn
                       CXP_AddOnSuppress_netmeeting
                       CXP_AddOnSuppress_pinball
                       ZYX_AddOnSuppress_tour (This one is my modification from Vier's release)

Use RVM integrator for dotnet3fix_addon.7z
                       Jondar_RegeditCPL_Addon_v1.0
                       Kels_AutoPlay_addon_v5.2.3790.67
                       Kels_Bootvis_CPL_addon_v1.3.37.0
                       Kels_CMDHere_addon_v1.4
                       Kels_DirectX_CPL_addon_v9.0c
                       Kels_MS_MSICleaner_addon_v4.4
                       Kels_SafeXP_Addon_v1.5.7.14
                       Kels_TweakUI_Addon_v2.10.0.0
                       MrsP_Cabinet_Tools_SDK_Combo_Addon_v1.2
                       Ricks_CPUZ-CPL_AddOn_v1.39
                       RVMAddonsDX9_1.2
                       RVMAddonsWGAN_1.7.18.1
                       RVMUpdatePack2.1.8
                       
Use RVM integrator for RogueSpearAddonsDotNET_11SP1
                       RogueSpearAddonsDotNET20

Use RVM integrator for Boooggy_WMP11_Addon.7z

Use RVM integrator for NR_IE7en_Addon_1.0.2

Use RVM integrator for Ricktendo64_Zune_Theme_AddOn_v1.1
                       Cursor_Kels_FedoraInverse_addon_v1.1
                       LE505AddOn-DumpyDooby_v1.01
                       NR_DesktopIcons_Addon
                       PatchAddon_UXTHEME_v13c

Manual Integration of Raid drivers (PROMISE Fasttrack & VIA)

Manual Integration of (added to SVCPACK.INF) AdobeReader8
                                             jre511.exe
                                             klmcodec167.exe
                                             LiveMessenger81Final.exe
                                             TaskSwitchXP2011.exe /S
                                             VisualTaskTips21.exe /S

Manually tweak WINNT.SIF

Copy files oeminfo.inf & oemlogo.bmp to \$OEM$\$$\System32

Created ISO File with Nero 6.0.12
The test was done in VWare 5.5.3.


A special thanks to RyanVM, Siginet, Vier, Roguespear, Kelsenellenelvian, DumpyDooby, Ricktendo, MrNxDmX, Jondar and Mrs. Peel for their great release. Keep doing great job! :D

- Zyx Maiden

Broly10000
Posts: 53
Joined: Fri Dec 22, 2006 1:41 pm

Post by Broly10000 » Sun Mar 25, 2007 1:30 am

mr_smartepants wrote:Are you integrating over a 'clean' or 'dirty' source?
Try burning your CD at a slower speed **edit** disregard, just noticed you used VPC2k7.
A clean Original XP with SP2 Slipstreamed as always. I have an idea, I'll try to do the integrations in my server to see of there was a problem with my last integration (Installed in this pc) that could be causing problems now. Ill give a report back to see if the problem is solved on wednesday...

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Sun Mar 25, 2007 8:41 am

Zyx_Maiden wrote:<snip>
Read the first post a bit more carefully (or the other thread going a few down from this one) ;)
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

User avatar
Zyx_Maiden
Posts: 128
Joined: Mon Mar 12, 2007 9:32 pm
Location: Québec, Canada

Post by Zyx_Maiden » Sun Mar 25, 2007 8:25 pm

:oops: Sorry Ryan, I've readed all those posts and figured it is a version problem. I just tough my post may help you or someone else as I was able to install .NET 3.0 anyway without problem. So i'll wait your Switchless AIO .Net installer. I can snip out the very long post i've sent if it is useless, just les me know...

Eiffel
Posts: 73
Joined: Fri Nov 03, 2006 3:36 am

MCE2005 Problem

Post by Eiffel » Mon Mar 26, 2007 8:19 am

Hi I've tryied to integrate your pack in an Media Center 2005 using the slipstreamer (not nlite ). It ask for the Components folder and then start the integration. It install well - no erors, but I get no Media Center and MCE aplications. They are displayed in Add/Remove Windows Components, but even check or uncheck the option - they are not installed. More - the eHome folder is present but contains only one file.

Strange as for XP Pro I have no problems.

pmi
Posts: 35
Joined: Thu Feb 03, 2005 2:35 pm
Location: Romania

Post by pmi » Mon Mar 26, 2007 8:24 am

Read the FAQ:
What versions of Windows are supported by this pack?
The only versions of Windows that this pack officially supports are English versions of Windows XP Home and Windows XP Professional.

Broly10000
Posts: 53
Joined: Fri Dec 22, 2006 1:41 pm

Post by Broly10000 » Mon Mar 26, 2007 9:25 pm

Broly10000 wrote:
mr_smartepants wrote:Are you integrating over a 'clean' or 'dirty' source?
Try burning your CD at a slower speed **edit** disregard, just noticed you used VPC2k7.
A clean Original XP with SP2 Slipstreamed as always. I have an idea, I'll try to do the integrations in my server to see of there was a problem with my last integration (Installed in this pc) that could be causing problems now. Ill give a report back to see if the problem is solved on wednesday...

OK, Early report. It seems that my last (2.1.7, Installed in this machine) integration got wrong because I did the integration again in my server to see if it works now and guess what, no errors. What do you think could be the culprit? It is corrupting the cabs. Well, I’m going to reinstall my windows then try to do the same integration again to see if it works. At lest it is working now in VPC2007, let’s see how this behave in real hardware. Keep the good work Ryan, this works perfectly now.

Thanks for the help and for pointing me in the right direction about the corrupted cabs. I still find strange that the integration didn’t give me errors about the corrupted cabs.

PS.
An Admin friend I have is asking me how I can come up with an updated Windows XP with WMP11 and IE7 CD and I tell him he has to study a little more to start learning this stuff. Maybe I’ll tell him next week about this page; meanwhile I’ll keep bothering him he needs to have advanced PC knowledge to do this.

pretz
Posts: 2
Joined: Wed Mar 28, 2007 10:25 am
Location: Chicago, IL

SQL Server 2005

Post by pretz » Thu Mar 29, 2007 7:11 pm

FYI, the new update pack (with nLite 1.3.0.4) also causes setup failures in SQL Server 2005 Developer Edition... other editions probably affected but I didn't test them. I verified the problem by reverting to the 2.1.7 update pack (with nLite 1.3.0.4) and SQL Server installs without incident. I suspect that MSXML 6 SP1 is the problem, but I don't know how to remove/test it. Just thought you should know (if you didn't already).

-=Bob :-)

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Thu Mar 29, 2007 8:19 pm

Did you try using the addon in the first post? That would answer your question pretty fast...
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

pretz
Posts: 2
Joined: Wed Mar 28, 2007 10:25 am
Location: Chicago, IL

Post by pretz » Fri Mar 30, 2007 1:05 pm

RyanVM wrote:Did you try using the addon in the first post? That would answer your question pretty fast...
I thought the addon from the first post was for .NET Framework 3.0... but apparently it works for SQL Server 2005 too (what exactly does it do?). Anyway, I applied the addon to the install and everything works fine now. Thanks for the quick response.

-=Bob :-)

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Fri Mar 30, 2007 3:47 pm

It removes some registry entries I really shouldn't have added in the first place.

(/me is already looking forward to 2.1.9 coming out)
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

Broly10000
Posts: 53
Joined: Fri Dec 22, 2006 1:41 pm

Post by Broly10000 » Mon Apr 02, 2007 12:26 am

Broly10000 wrote: OK, Early report. It seems that my last (2.1.7, Installed in this machine) integration got wrong because I did the integration again in my server to see if it works now and guess what, no errors. What do you think could be the culprit? It is corrupting the cabs. Well, I’m going to reinstall my windows then try to do the same integration again to see if it works. At lest it is working now in VPC2007, let’s see how this behave in real hardware. Keep the good work Ryan, this works perfectly now.

After Doing the integration in another pc, i reinstalled the pc with the new integration and everything went fine. Re-did the integration in the pc that was corrupting the cabsand the integration went fine. Well, problem solved for me. Thanks for all your help.

mara-
Posts: 49
Joined: Wed Feb 21, 2007 5:20 pm

Post by mara- » Mon Apr 02, 2007 1:29 pm

Hi Ryan!

First your pack is great! But I think that you need to exclude from your pack patch that upgrades Windows Update to Microsoft update! I have Windows Update, and I opened it, and on page is used to be banner for installation of Microsoft update, but not anymore and I think Microsoft stoped offering instalation of it. Also, I sow on some forums that Microsoft update have some bug, that causes 100% CPU with svchost.exe process! This also happend to my frined, who was using Microsoft update, and as soon as she connect to Internet her computer became so slow (because of hi cpu), that you cant do anything exept "hard" restart! So to check is Microsoft update causes problem, I disabled Automatic updates service, and everything was perfect, so I reverted back to Windows update and everthing is fine now!!!
Office 2000/XP/2003/2007 Slipstreamer: http://www.msfn.org/board/Office-2000-X ... 21357.html

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Mon Apr 02, 2007 4:19 pm

2.1.8 includes the patch for msi.dll which supposedly helps alleviate the 100% CPU issue. Also, I'm pretty sure MU removal addons exist on this forum already.
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

Skram
Posts: 26
Joined: Wed Mar 07, 2007 1:14 am

Post by Skram » Wed Apr 04, 2007 1:45 am

I've seen that 100% CPU issue on a lot of comps. Especially HPs. I just go to the MU settings and disable it for the problem comps. I didn't notice any delay on two 2.1.8 comps though. Hopefully that's fixed.

SoKoOLz
Posts: 180
Joined: Tue Jul 11, 2006 3:53 am

Post by SoKoOLz » Wed Apr 04, 2007 2:22 am

Skram wrote:I've seen that 100% CPU issue on a lot of comps. Especially HPs. I just go to the MU settings and disable it for the problem comps. I didn't notice any delay on two 2.1.8 comps though. Hopefully that's fixed.
Hmm 100% CPU problem.. is that caused by svchost.exe?
It's going to be like that for a while, Windows is running the update engine to check whether u have the latest patches or not and after a while 100% CPU will disappear.
Image

newsposter
Posts: 1131
Joined: Wed Sep 14, 2005 11:31 am

Post by newsposter » Wed Apr 04, 2007 3:31 am

svchost.exe takes a lot of uninformed heat for cpu usage.

svchost.exe is (mostly) a 'host' (duh) for miscellaneous system processes that for various reasons are not their own 'service'. The processes are called and started via svchost.exe and one of the startup parameters is the relative CPU priority a process should be started at.

If that startup priority is set too high, either deliberately or by accident, then your CPU gets maxed out quite easily.

A lot of the so-called 'fixes' to svchost.exe are nothing more than refinements to process definition and startup parameters. Since MSFT 'owns' svchost.exe, it should be easy to deduce which way to point the fingers.

Using something like sysinternals process monitor/explorer (both recently updated) or even prio.exe (also recently updated) from prnwatch.com, it's very easy to look into the background processes in each instance of svchost.exe and decide for yourself if they are even necessary and if they are, to determine if they are running at a too-high cpu priority.

User avatar
ENU_user
Posts: 1253
Joined: Wed Jan 25, 2006 1:42 pm

Post by ENU_user » Wed Apr 04, 2007 9:01 pm

ryan! do you update the former updatepack you keep on the tracker to a ( stabilized pack ) like if and when their are found issues with it ..
what i mean is .. when the new hotfixes are released and we find later that they are buggy .etc. or something wrong found in the pack ( knock on wood )
you may have fixed some of the issue's had on former pack in a newer pack but with new hotfixes added aswell you cannot know what to expect
not knowing how these will work in the longer run as they are due to change in the following month anyways, as are maintained by wu.
and finally this is how it works
so you got one stable not so far behind pack that can be downloaded and used as an error proof pack but not updated fully and so only few hotfixes left to install on wu no biggi ..

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Wed Apr 04, 2007 9:24 pm

No, I don't update previous releases. I don't even personally seed them.
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

User avatar
ENU_user
Posts: 1253
Joined: Wed Jan 25, 2006 1:42 pm

Post by ENU_user » Wed Apr 04, 2007 9:42 pm

thats the reason i brought this up ..
but such a pack can act more like sp3 on for core changes since sp2
and can be updated relatively for any new core file changes
just same ideas running out and about...

biatche
I can't read
Posts: 326
Joined: Thu May 04, 2006 2:49 am

Post by biatche » Fri Apr 06, 2007 4:23 pm

uncle ryan, everyone except me is running out of patience. wheres 219 uncle ryan? :rolleyes:

newsposter
Posts: 1131
Joined: Wed Sep 14, 2005 11:31 am

Post by newsposter » Fri Apr 06, 2007 4:39 pm

you know damned well that update packs come out a week or so AFTER 'patch tuesday' which isn't until NEXT WEEK.

Get a life.

biatche
I can't read
Posts: 326
Joined: Thu May 04, 2006 2:49 am

Post by biatche » Fri Apr 06, 2007 5:07 pm

people hate me now. haha =]
Last edited by biatche on Sat Apr 07, 2007 12:16 am, edited 1 time in total.

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Fri Apr 06, 2007 7:04 pm

Suddenly your title seems very fitting...
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

User avatar
MrNxDmX
Moderator
Posts: 3112
Joined: Mon Jan 03, 2005 7:33 am

Post by MrNxDmX » Fri Apr 06, 2007 7:32 pm

Which bug you're talkin about biatche? You cant read, also you cant understand people???
Its not funny to talk people like that, especially to those who help others without any bucks :evil:

User avatar
ENU_user
Posts: 1253
Joined: Wed Jan 25, 2006 1:42 pm

Post by ENU_user » Fri Apr 06, 2007 7:37 pm

@ryan, i would say biatche works for you if i wasn't 100% sure it could possibly be you, impersonating some user ..
which isn't a bad idea. "the ryanvm 'bug'" or "the ryanvm 'virus'"
this can be great! @ biatche, only 2 days ago .. was Aprils fools day ahh you'r late again!
hahahaa ( j/k guys ) enjoy .

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Fri Apr 06, 2007 8:34 pm

Unless my ISP recently changed to tm.net.my (speaking of which, they're one of the hosts that's notorious for slamming my server after every release), I assure you he and I aren't at all the same.
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

newsposter
Posts: 1131
Joined: Wed Sep 14, 2005 11:31 am

Post by newsposter » Fri Apr 06, 2007 9:28 pm

gee, if you ban both biatche and his isp, that might take care of two problems at once.....

sambenin
Posts: 43
Joined: Wed Mar 29, 2006 8:21 am

Post by sambenin » Fri Apr 06, 2007 9:53 pm

newsposter wrote:gee, if you ban both biatche and his isp, that might take care of two problems at once.....
There are some regular and NORMAL users from tm.net.my who also download ryan packs, so just try just to post ur news as ur title suggests instead of suggesting bad things!!!

biatche
I can't read
Posts: 326
Joined: Thu May 04, 2006 2:49 am

Post by biatche » Sat Apr 07, 2007 12:16 am

Haha ok.. I'll keep quiet... =]
It removes some registry entries I really shouldn't have added in the first place.
just worries me :/

thanks for the lesson fellas... made me realize 1 thing about myself, and people generally... sorry guys hehehe

Thanks for all your packs and hard work so far ryanvm. Hope you'll like me now :D :lol:

TheSickman
Posts: 103
Joined: Mon Jul 17, 2006 12:17 pm

Post by TheSickman » Sat Apr 07, 2007 3:55 am

tanks a lot , i did try a english release with ur pack and al went fine

User avatar
Wesmosis
Posts: 350
Joined: Tue Feb 21, 2006 7:53 pm

Post by Wesmosis » Sun Apr 08, 2007 6:24 pm

thanx

Chrysalis
Posts: 104
Joined: Fri Mar 03, 2006 8:37 am
Location: UK
Contact:

Post by Chrysalis » Mon Apr 09, 2007 6:26 am

RyanVM wrote:
Protagonist. wrote:Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
You can thank the asshats sending thousands upon thousands of requests at my server all at the same time. I maintain a rather large .htaccess block list as they pop up, but it's extremely difficult to stay on top of it. I'm going to have to resort to using the torrent tracker as the primary distribution method for the first few days I think. Dreamhost is getting rather pissed at me because my site is constantly bringing down the server it's hosted on.
I know you dont want mirrors but what about if I offer a mirror that you in control off? sponsored link.

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Mon Apr 09, 2007 8:29 am

I would say you're crazy for wishing that kind of punishment on yourself. That said, I already have two mirrors available to me should I need them. But I don't see the point since that just means the attack would shift to a different server. Big whoop.
Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

superleiw
Posts: 127
Joined: Wed Aug 03, 2005 11:22 am

Post by superleiw » Wed Apr 11, 2007 8:28 pm

are the updates that you will be including in 2.1.9 already avaible on the mu page ?

sorry I don't have acces to it at the moment so maybe someone can tell me

User avatar
RyanVM
Site Admin
Posts: 5188
Joined: Tue Nov 23, 2004 6:03 pm
Location: Pennsylvania
Contact:

Post by RyanVM » Thu Apr 12, 2007 7:21 pm

Get up to $200 off on hosting from the same people who host this website!
http://www.ryanvm.net/forum/viewtopic.php?t=2357

Locked