[Release] RyanVM Addons Pack 1.9.0 (Updated 2008-08-25)

keloo05 · Post by **keloo05** » Sun Dec 16, 2007 2:34 pm

HashTab 2.0.7 released

Please Ryan update this addon when the 2.2.1 update pack is ready

Many thanks for your work.

orcoxp · Post by **orcoxp** » Sun Dec 16, 2007 3:20 pm

Link still points to 1.8.2

keloo05 · Post by **keloo05** » Sun Dec 16, 2007 6:03 pm

Also, UPX 3.02 is up

http://upx.sourceforge.net/download/upx302w.zip

rubab · Post by **rubab** » Mon Dec 17, 2007 2:11 am

Thanks for your AddOn.

Kelsenellenelvian · Post by **Kelsenellenelvian** » Mon Dec 17, 2007 3:27 am

HEY rubab look at the post right above yours captain obvious....

rubab · Post by **rubab** » Tue Dec 18, 2007 11:05 am

I actually clicked on "post reply" from the first page. when i saw it i already posted it and i don't know how to delete a post. For your sake i will edit it.
Thanks and sorry for my mistake.

kontini · Post by **kontini** » Tue Dec 18, 2007 12:33 pm

I suggest to replace copysend.dll with these two regs taken from Vista

Code: Select all

HKCR,"AllFilesystemObjects\shellex\ContextMenuHandlers\{C2FBB630-2971-11D1-A18C-00C04FD75D13}"
HKCR,"AllFilesystemObjects\shellex\ContextMenuHandlers\{C2FBB631-2971-11D1-A18C-00C04FD75D13}"

@kelsenellenevian
The suggestion is also valid for your pack.

Post by **RyanVM** » Tue Dec 18, 2007 10:48 pm

The CopyTo/SendTo registry tweak has issues. Hence the DLL. Seriously, the issue has been known for at least 5 years now...

keloo05 · Post by **keloo05** » Sun Dec 23, 2007 6:19 pm

HashTab 2.0.8 released

benjamminzIS · Post by **benjamminzIS** » Sat Dec 29, 2007 1:42 pm

orcoxp wrote:Link still points to 1.8.2

still

Post by **5eraph** » Sat Dec 29, 2007 2:09 pm

The following conversation snippet should be enough to explain why, benjamminzIS.

In the beta Update Pack thread, [url=http://www.ryanvm.net/forum/viewtopic.php?p=65488#65488]superdupe[/url] wrote:hey Ryan... Was the addons pack updated to 1.8.3? or is it still at 2? the thread shows the changelog but the link points to the older verison...
and thanks for the torrent link....

In response, RyanVM wrote:It hasn't been officially updated yet. I was just using it as a placeholder so I wouldn't forget what changed. I'll bump the thread when it's ready (you'll notice I wasn't the one doing it )

Tasslehoff · Post by **Tasslehoff** » Wed Jan 02, 2008 12:27 am

When Hastab is updated in the pack will it come preconfigured to show at least md5 checksums as I think the default installation doesn't include any checksum data from installing another pack with hashtab 2.x included ie: it took me a couple of minutes to figure out the new layout and manually set which checksums to display. Thanks Ryan.

Post by **RyanVM** » Sun Jan 13, 2008 9:57 am

v1.8.3 is up

dkrus · Post by **dkrus** » Sun Jan 13, 2008 10:56 am

Thanks Ryan

ChiefZeke · Post by **ChiefZeke** » Mon Jan 14, 2008 11:41 pm

Thanks for the update - good job.

Have one question; does 1.8.3 negate the need for sKz_RVMAddons_1.8.2.1.7z ?

Thanks again.

keloo05 · Post by **keloo05** » Thu Feb 28, 2008 6:04 am

Unlocker 1.8.6 released.
Download: http://ccollomb.free.fr/unlocker/unlocker1.8.6.exe

TechnoHunter · Post by **TechnoHunter** » Thu Feb 28, 2008 12:32 pm

umm you do realize that the main site for unlocker still only has available 1.8.5 yes?

the link you provided bounces to the main site btw

TechnoHunter

keloo05 · Post by **keloo05** » Thu Feb 28, 2008 6:19 pm

Yes, I know

The link doesn't work anymore. It will updated shortly. Anyway, if someone wants the 1.8.6 version, I can upload it for you...

MrNxDmX · Post by **MrNxDmX** » Thu Feb 28, 2008 8:18 pm

@ keloo05: I'm sure there was an error with 1.8.6 version, but i'd like to get it anyway

keloo05 · Post by **keloo05** » Sun Mar 02, 2008 3:43 pm

The unlocker site was updated with the 1.8.6 release

An update to this addon would also be great

Thanks a lot Ryan for your work...

datoknakal · Post by **datoknakal** » Fri Mar 28, 2008 5:29 pm

i can't download "RyanVM Addons Pack", i followed the link provided, but it says "forbidden to share",

need advice, pls, thanks.

Post by **5eraph** » Fri Mar 28, 2008 6:03 pm

If you're behind a software firewall, shut it down temporarily. Otherwise, try Ryan's bittorrent tracker.

suniltr77 · Post by **suniltr77** » Sun Mar 30, 2008 9:43 pm

Is it 1.5.1 compatible?

Post by **RyanVM** » Tue Apr 01, 2008 9:29 am

J.C. · Post by **J.C.** » Fri Apr 18, 2008 8:44 am

Thanks Ryan, this pack is always a must have on my list

.

Just a quick question about this pack,
is there a way to workaround so that calc.exe and makecab.exe will stiil be signed ?

i know calc had to be changed so it'll open the right help file
but is there any real harm in keeping the original and letting it open calcplus.chm ?

Post by **RyanVM** » Sat Apr 26, 2008 9:17 am

No, just a little extra bloat.

keloo05 · Post by **keloo05** » Sat Apr 26, 2008 9:52 am

Ryan, would you be kind to update this pack with the 1.8.6 version of Unlocker? Thank you very much.

Wicked · Post by **Wicked** » Tue Apr 29, 2008 7:47 pm

Will this pack work on a XP SP3 ? I'm just downloading it and i plan to integrate it tomorrow....

crashfly · Post by **crashfly** » Tue Apr 29, 2008 7:52 pm

Wicked wrote:Will this pack work on a XP SP3 ? I'm just downloading it and i plan to integrate it tomorrow

All indications would be yes, since the added files do not appear to directly affect SP3. However, the final say would have to come from Ryan on that issue.

Wicked · Post by **Wicked** » Tue Apr 29, 2008 7:54 pm

crashfly wrote:
Wicked wrote:Will this pack work on a XP SP3 ? I'm just downloading it and i plan to integrate it tomorrow
All indications would be yes, since the added files do not appear to directly affect SP3. However, the final say would have to come from Ryan on that issue.

Thanks for quick answer

. I will try integration tomorrow and test clean install. I will post results here

.

Thanks again.

Post by **RyanVM** » Tue Apr 29, 2008 9:31 pm

1.8.4 is up

ChiefZeke · Post by **ChiefZeke** » Wed Apr 30, 2008 1:17 am

Downloaded - good work.

Will give it a try after slipstreaming SP3 into my Pro and Home CDs; then I'll be making an new Integrated CD for both systems.

Wicked · Post by **Wicked** » Thu May 01, 2008 9:41 am

I have bad news with 1.8.3... Integration with SP3 went fine but installation of windows reported numerous errors.. I will try with 1.8.4 again.

Have anyone tried this maybe ?

krieger546 · Post by **krieger546** » Fri May 02, 2008 11:12 am

Yay!

Unlocker got updated to 1.8.7 the next day.

marzsyndrome · Post by **marzsyndrome** » Fri May 02, 2008 1:31 pm

Just out of interest, Ryan........ what tool do you use to create R_Addons.cab?

When I try to modify addons myself to add updated files for my own use, I just tend to use PowerArchiver. If there's a good freeware alternative out there however (when it comes to CABing), feel free to point me out to it.

Post by **5eraph** » Fri May 02, 2008 2:37 pm

If I recall correctly, he uses jdoe's CAB Tool. It's free.

bryanh · Post by **bryanh** » Mon May 05, 2008 3:01 pm

Hi all,

Has anyone gotten this to work with SP3? I assume it will not work. Here is what I get

1) Although my winnt.sif sets the default display to 1024x768, after this addon XP starts in 800x640

2) The items that are supposed to be added are not (no powertoys, not hashtab, etc)

3) The items to be removed are in fact removed

4) IE is gone (IE6) - the icon on the start menu that SHOULD open IE, is now the icon for setting IE settings, and in fact brings up IE settings tab.

Ideas? Or just "This is not for SP3"

Thanks
Bryan

Post by **RyanVM** » Mon May 05, 2008 9:09 pm

I haven't personally tried it with SP3, but I don't know why it *wouldn't* work...

bryanh · Post by **bryanh** » Mon May 05, 2008 9:38 pm

RyanVM wrote:I haven't personally tried it with SP3, but I don't know why it *wouldn't* work...

Seems a LOT of things are breaking SP3, or at least SP3 on XP Corp.

This is one of those "things"

UPDATE - it works if you add this first

kontini · Post by **kontini** » Tue May 13, 2008 2:30 am

New Unlocker 1.8.7
and, if possible, an updated version of makecab that doesn't mess up file dates
Bye

Post by **5eraph** » Tue May 13, 2008 4:12 am

bryanh wrote: Has anyone gotten this to work with SP3?

This addon works for me.

Raoul90 · Post by **Raoul90** » Tue May 27, 2008 3:55 pm

HashTab 2.0.9

kontini · Post by **kontini** » Wed Jun 04, 2008 1:06 am

kontini wrote: ... if possible, an updated version of makecab that doesn't mess up file dates
Bye

I've found what i was searching inside Windows Installer 4.5 SDK

Post by **RyanVM** » Thu Jun 05, 2008 9:25 pm

Thanks for the heads-up on that. I'll have a new addon ready to be released along with the new packs next week.

pmi · Post by **pmi** » Sat Jun 14, 2008 6:16 pm

HashTab 2.10 is out

Post by **RyanVM** » Mon Aug 25, 2008 10:14 pm

1.9.0 is up.

bibia · Post by **bibia** » Thu Sep 04, 2008 7:23 pm

RyanVM wrote:Current Version: 1.9.0
What's In It:
Copy To/Move To Context Menu Shell Extension
HashTab 2.1.1
Microsoft Calculator Plus 1.0 (Replaces calc.exe)
Microsoft HighMAT CD Writing Wizard (KB831240)
Microsoft Makecab 6.0.6001.22192 (From Windows Installer 4.5 SDK, doesn't mess up file dates)
Microsoft OpenType Font Properties Extension 2.30
Microsoft Power Calculator PowerToy 1.0
ModifyPE 0.81
Microsoft TweakUI PowerToy 2.10
Unlocker 1.8.7
UPX 3.03
What's New:
Version 1.9.0
Removed SyncToy
Updated HashTab to version 2.1.1
Updated Makecab to version 6.0.6001.22192
Updated Unlocker to version 1.8.7
[/size]
Download: http://download.ryanvm.net/files/RVMAddons_1.9.0.7z (1.57MB)
MD5 Checksum: 888209EFCE3149127E778D3E513E517A

ryan..
could u pls tell me how do i manually remove "Copy To/Move To Context Menu Shell Extension"?

i prefer using copyto/move to made with tuneup utilities.., coz the one that u gave me in ur past sp2 update pack really annoying me. i can't make a new folder whenever using that copy to/ move to..

i just want to get rid of it..
but forget which one to remove in regedit.. (i don't wanna messing around after fresh install xp). i learned about it in the past.. but sadly, forget how to remove it..

so pls..
tell me how do i remove it in regedit..
or if u kind enough, pls make me the .reg file..

or can i just simply remove "copysend.dll" in ur .7z archive?
i doubt it, coz in "R_Addons.inf", there's

Code: Select all

[DLLs.Register]
11,,CopyToSendTo.dll,1

pls respond my question a.s.a.p..

p.s. i like the rest of it (in that add-on u made), except that "Copy To/Move To Context Menu Shell Extension".

Post by **5eraph** » Thu Sep 04, 2008 8:23 pm

The easiest method to disable it within the addon is to place a semicolon ( ; ) in front of the line to register the DLL, like so:

Code: Select all

[DLLs.Register]
[color=yellow];11,,CopyToSendTo.dll,1[/color]
11,,HMTCD.dll,1

Leaving the file in the addon won't hurt anything, but if you want to completely remove it then you'll need to remove (or add semicolons to) the following lines in entries_addons.ini in addition to making the change above.

Code: Select all

d1,copysend.dll

Code: Select all

copysend.dll = 100,,,,,,,2,0,0,CopyToSendTo.dll

Code: Select all

rvmtemp\extracted\copysend.dll

If you want to disable it on a system where the addon has already been used, type the following at a command prompt:

Code: Select all

regsvr32 /u CopyToSendTo.dll

bibia · Post by **bibia** » Wed Sep 10, 2008 11:59 am

thx..

it's worked!

i really2 appreciate ur help..

Falcon4 · Post by **Falcon4** » Mon Oct 13, 2008 12:14 am

This needs to be stickied in this forum.
Why is this not stickied?

I was unable to find *any* information about what's in the new official Addons pack, until I actually searched this forum for this topic... only to find it was buried. I can't live without this addons pack now

Keep up the great work, but seriously, make the information about what's inside it more accessible from the main pages!

RyanVM.net Discussion Board

[Release] RyanVM Addons Pack 1.9.0 (Updated 2008-08-25)

UPX 3.02 is out

Breaks SP3 installs?

Re: [Release] RyanVM Addons Pack 1.9.0 (Updated 2008-08-25)