[Release] Onepiece IE7-8 XP/2003 Addon Maker

Discuss & post Update Pack addons here.
Post Reply
User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Wed Aug 05, 2009 6:21 am

Onepiece 's IE8 addons are planned to strictly follow the default MS setup process that doesn't allow to copy file to System32 from ie.inf.

However we could build a "repair" addon to fit that specific requirement

EDIT:

Here it is:

OnePiece_IE8_WinXPSP3_v2009_Repair_for_USB_XP_Setup_Installation_AddOn_INTL.7z
http://www.qooy.com/files/S8WDWRZW/OneP ... On_INTL.7z
Hash MD5 8BB49CB2C1325F2C490C69DD03595287

add it in your integration list after IE8 Addon (or XP AIO UpdatePack)
Works with RVM Integrator only (not with Nlite)
Last edited by nonno fabio on Sat Aug 08, 2009 9:07 am, edited 1 time in total.
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

User avatar
wimb
Posts: 112
Joined: Thu Jun 21, 2007 6:08 am

Post by wimb » Thu Aug 06, 2009 3:48 am

Somehow the Repair Addon is NOT giving the desired result for me when using USB_XP_Setup.exe.
I get the same FileCopy Errors at level 99% in TXT-mode XP Setup as reported previously.

After using RVM Integrator there are still double entries in txtsetup.sif at the end of [SourceDisksFiles.x86] Section which seem to be responsible for the FileCopy Errors.

Code: Select all

ie4uinit.mui = 100,,,,,,,2,0,0,ie4uinit.exe.mui
iedkcs32.mui = 100,,,,,,,2,0,0,iedkcs32.dll.mui
ieframe.mui  = 100,,,,,,,2,0,0,ieframe.dll.mui
mshta.mui    = 100,,,,,,,2,0,0,mshta.exe.mui
msrating.mui = 100,,,,,,,2,0,0,msrating.dll.mui
sqmapi.dll   = 100,,,,,,,,3,3

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Thu Aug 06, 2009 5:50 am

Repair Addon uses [ExtraFileEdits] to disable those lines.
It has been successfully tested on XP SP 3 before uploading.

Code: Select all

;This section allows you to edit things that normally would not be possible to edit.
[ExtraFileEdits] 
TXTSETUP.SIF|ie4uinit.mui = 100,,,,,,,2,0,0,ie4uinit.exe.mui|;ie4uinit.mui = 100,,,,,,,2,0,0,ie4uinit.exe.mui|1
TXTSETUP.SIF|iedkcs32.mui = 100,,,,,,,2,0,0,iedkcs32.dll.mui|;iedkcs32.mui = 100,,,,,,,2,0,0,iedkcs32.dll.mui|1
TXTSETUP.SIF|ieframe.mui  = 100,,,,,,,2,0,0,ieframe.dll.mui|;ieframe.mui  = 100,,,,,,,2,0,0,ieframe.dll.mui|1
TXTSETUP.SIF|mshta.mui    = 100,,,,,,,2,0,0,mshta.exe.mui|;mshta.mui    = 100,,,,,,,2,0,0,mshta.exe.mui|1
TXTSETUP.SIF|msrating.mui = 100,,,,,,,2,0,0,msrating.dll.mui|;msrating.mui = 100,,,,,,,2,0,0,msrating.dll.mui|1
TXTSETUP.SIF|sqmapi.dll   = 100,,,,,,,,3,3|;sqmapi.dll   = 100,,,,,,,,3,3|1
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

User avatar
Stefhan
Posts: 78
Joined: Sun Feb 18, 2007 10:16 pm
Location: Groningen (NL)

Post by Stefhan » Fri Aug 07, 2009 8:45 am

nonno fabio wrote:Onepiece 's IE8 addons are planned to strictly follow the default MS setup process that doesn't allow to copy file to System32 from ie.inf.
The default MS Setup also doesn't allow IE8 to be integrated like this, should we respect that to? I just don't see the problem.
In the update.inf from the original IE8 these files are also copied to system32.
Don't get me wrong, i do appreciate you making the repair addon.

Why are these files copied to both system32 and the system32"MuiCultureDirectory" in the first place.
If I look at IE8 under vista those files are only present in the "MuiCultureDirectory".
If I delete the .mui files in system32 IE8 runs just fine.
It looks like they are redundant.

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Fri Aug 07, 2009 12:24 pm

I mean that the integrated IE8 is identical to the installed one. Onepiece has spent many hours to get such a goal: it's easier to copy files using ie.inf but it's cleaner to do it from txtsetup.sif

I don't know why MS decided to copy those files both to System32 and MuiCultureDirectory folders in XP and to MuiCultureDirectory only in Vista, but this is the default behavior.

The "repair addon" is language indipendent and works flawlessy on a clean (not modified by third party SW) XP source but is not a replacement of the modified NLD addon, instead an alternative for different localization
Last edited by nonno fabio on Sat Aug 08, 2009 9:16 am, edited 1 time in total.
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

User avatar
wimb
Posts: 112
Joined: Thu Jun 21, 2007 6:08 am

Post by wimb » Fri Aug 07, 2009 1:59 pm

My initial problem with IE8 Repair Addon in XP Setup with USB_XP_Setup.exe is almost solved
by using RyanVM Integrator in a two step process and Integrating first the IE8 Addon and then in a second run the IE8 Repair Addon.

Now the TXT-mode XP Setup FileCopy errors are gone, but file sqmapi.dll is not found in GUI-mode of XP Setup.
I verified that After TXT-mode Setup the file sqmapi.dll is present in C:\WINDOWS\system32\dllcache folder.

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Sat Aug 08, 2009 9:10 am

Please redownload the USB XP Setup Repair Addon and retry: the issue should be fixed.

Thanks.
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

User avatar
wimb
Posts: 112
Joined: Thu Jun 21, 2007 6:08 am

Post by wimb » Sun Aug 09, 2009 2:32 am

nonno fabio wrote:Please redownload the USB XP Setup Repair Addon and retry: the issue should be fixed.
The IE8 Repair Addon applied after integration of OnePiece IE8 Addon is working now OK.
It allows now to make use of USB_XP_Setup.exe for Install of XP from USB using XP Setup Source with Repaired OnePiece IE8 Addon.

Thanks and Cheers,

wimb

User avatar
vmanda
Posts: 1634
Joined: Wed Apr 18, 2007 12:25 pm
Location: TM.Romania

Post by vmanda » Tue Aug 18, 2009 5:38 am

Running for few times run_automatic_ie78_xp2k3_own_addon_creator_intl.exe
to create IE7 addon, it works, addon creation are succesfull,
integrating in xp ok , but trying to install XP I got complains about missing msfeedsbs.dll..
Doing some researches I have find the problem: files in addon do not match with entries_ie7.ini file.
See foto:
http://img87.imageshack.us/img87/1141/opie7err.jpg
Here is the list of files provided to addon creator:
IE7-WindowsXP-KB889333-x86-ENU.exe
IE7-WindowsXP-KB935560-x86-ENU.exe
IE7-WindowsXP-KB938127-v2-x86-ENU.exe
IE7-WindowsXP-x86-enu.exe
WindowsXP-KB972260-x86-ENU.exe

After unpaching and renaming msfeedsbs.dll as msfeedsb.dll repacking back, integrrating again, all xp setup went ok.
Originated file are msfeedsbs.dll from IE7-WindowsXP-x86-enu, that needs to be renamed,
I just think, to 8.3 compliant name by creator, but she don't rename it, just registering it with desired name into entries ini file
I have solved mine's issue, but maybe creator needs to be corrected...

Best regards. vmanda

User avatar
OnePiece Alb
Posts: 525
Joined: Sat Sep 01, 2007 7:01 pm
Location: Albania
Contact:

Post by OnePiece Alb » Tue Aug 18, 2009 7:34 pm

is true, in the latest releases or touched that thing because it intends to pass or even ie7 feeding, in 8.3 Mod, and we forget or change the script

for the time you changed the name of the file in question, otherwise we will release all right, because even Nonno Fabio and holidays, so when Nonno Fabio returns, we will update the link

Thanks for reporting.

Ciao.

User avatar
vmanda
Posts: 1634
Joined: Wed Apr 18, 2007 12:25 pm
Location: TM.Romania

Post by vmanda » Tue Aug 18, 2009 8:26 pm

I have allready do it by hand, I have posted just to report issue.
Thank for yours response. Best regards, vmanda

User avatar
dumpydooby
Posts: 530
Joined: Sun Jan 15, 2006 6:09 am

Post by dumpydooby » Thu Aug 20, 2009 12:42 pm

nonno fabio wrote:@kaitsevaim: Onepiece will add a fix for your instance in next release. In the meantime you could try to delete the suspected codelines from registry after Windows setup.

@all: if you want to add your own tweaks to Onepiece's IE7 true addon, unpack the addon and put them in a [IE_ADDREG] section of entries.ini:

Code: Select all

[EditFile]
I386\IE.INF,IE.Tweaks.AddReg,IE_ADDREG
I386\IE.INF,IE.Tweaks.DelReg,IE_DELREG

[IE_ADDREG]
........


[IE_DELREG]
........ 
Quick question about this:

Is it actually necessary to unpack the files to do this? Couldn't we just create a whole new entries.ini file? I know that RVMi is (or at least was ... it's been nearly a year since I used it) capable of integrating a standalone entries.ini file.

Seems like it would make sense to integrate your addon, and then afterwards integrate an entries.ini file of our own.

eethball
Posts: 56
Joined: Thu Mar 01, 2007 2:31 pm

Post by eethball » Tue Oct 20, 2009 12:16 pm

Quick question. Does the addon maker need to be updated to support KB974455? Thanks again for your time.

eethball
Posts: 56
Joined: Thu Mar 01, 2007 2:31 pm

Post by eethball » Thu Nov 12, 2009 10:00 am

eethball wrote:Quick question. Does the addon maker need to be updated to support KB974455? Thanks again for your time.
Hey nonno. I was just wondering if this addon creator was still going to be maintained, or can I just pull the KB972260 out and put in KB974455 in it's place (and the post-KB974455 fix KB976749). I'm assuming the script needs to be modified to support those two hotfixes, but let me know. Thanks for all you guys do for this community.

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Fri Nov 13, 2009 3:49 am

you can just pull the old KB out and put the newer one in its place
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

Kakaru
Posts: 10
Joined: Fri Jan 19, 2007 2:26 pm

Post by Kakaru » Sun Nov 15, 2009 12:53 pm

So, until the addon is updated:
1) i extract the 2 updates and the addon
2) i copy the files from qfe folder over the ones in addon
3) i copy the .cat from the 2 updates to the scvpack folder from addon
4) i 7z the files

And that's all?

User avatar
5eraph
Site Admin
Posts: 4621
Joined: Tue Jul 05, 2005 9:38 pm
Location: Riverview, MI USA

Post by 5eraph » Sun Nov 15, 2009 1:18 pm

No, Kakaru. You also need most of the registry entries from the [Product.Add.Reg] section within Update.inf.

Kakaru
Posts: 10
Joined: Fri Jan 19, 2007 2:26 pm

Post by Kakaru » Sun Nov 15, 2009 1:56 pm

Too bad then, I'll wait for the update.

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Mon Nov 16, 2009 2:42 am

Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

Kakaru
Posts: 10
Joined: Fri Jan 19, 2007 2:26 pm

Post by Kakaru » Mon Nov 16, 2009 3:35 pm

I used it (intuitive). Now to test it.

Kakaru
Posts: 10
Joined: Fri Jan 19, 2007 2:26 pm

Post by Kakaru » Mon Nov 16, 2009 4:42 pm

Test report:
Yesterday, with the original addon, all went smooth.
Today, I used the Universal to create an updated ie7 addon, and it worked ok, to the best of my knowledge. I checked the 7z and the updated files were present.
However, when slipstreaming in the exact same config as yesteday (with driverpacks mass storage-method2) i get an error when dp setup is supposed to run, complaining that the normaliz.dll is missing.
Went over to dp forum and learned that this is not their error but an error with the IE slipstreaming addon

Any more help? Thanks.

SelfMan
Posts: 50
Joined: Tue Jan 15, 2008 12:43 pm

Failing KB978207

Post by SelfMan » Thu Jan 28, 2010 9:39 pm

I've got a small problem. I did the following:
- integrated SP3
- added
Addon_Microsoft.Net_Family.35SP1_ROE_1.07.7z
Kels_Runtimes_addon_v6.rar
OnePiece_IE7_WinXPSP3_AddOn_ENU.7z
OnePiece_Microsoft.NET_Framework_v1.1.4322.2443_True_AddOn_ENU.cab
onepiece_windows_media_player_11_true_addon_v2.0.0_enu.7z
RedDX_0.8.1_32bit_AddOn.7z
XPSP3_QFE_UpdatePack_1.1.7_20100122.7z
Everything went ok, but when I've entered the ms update site after the installation the KB978207 wanted to install but failed.

So I've started the installer manually and got an error:
Installation cannot continue because the following packages might not be valid.
KB889333-IE7 C:\Windows\system32\dllcache\iepeers.dll 7.0.6000.20661
KB889333-IE7 C:\Windows\system32\iepeers.dll 7.0.6000.20661
Reinstall the packages listed above and then install KB978207.

I've had to manually extract the iepeers.dll from KB978207 and place it to the system32 and dllcache folder. Then the update succeeded.
p.s.> sory if I've missed a post with this problem already mentioned

eethball
Posts: 56
Joined: Thu Mar 01, 2007 2:31 pm

Re: Failing KB978207

Post by eethball » Wed Feb 10, 2010 3:02 pm

SelfMan wrote:I've got a small problem. I did the following:
- integrated SP3
- added
Addon_Microsoft.Net_Family.35SP1_ROE_1.07.7z
Kels_Runtimes_addon_v6.rar
OnePiece_IE7_WinXPSP3_AddOn_ENU.7z
OnePiece_Microsoft.NET_Framework_v1.1.4322.2443_True_AddOn_ENU.cab
onepiece_windows_media_player_11_true_addon_v2.0.0_enu.7z
RedDX_0.8.1_32bit_AddOn.7z
XPSP3_QFE_UpdatePack_1.1.7_20100122.7z
Everything went ok, but when I've entered the ms update site after the installation the KB978207 wanted to install but failed.

So I've started the installer manually and got an error:
Installation cannot continue because the following packages might not be valid.
KB889333-IE7 C:\Windows\system32\dllcache\iepeers.dll 7.0.6000.20661
KB889333-IE7 C:\Windows\system32\iepeers.dll 7.0.6000.20661
Reinstall the packages listed above and then install KB978207.

I've had to manually extract the iepeers.dll from KB978207 and place it to the system32 and dllcache folder. Then the update succeeded.
p.s.> sory if I've missed a post with this problem already mentioned
I had the same issue, so I've removed the KB889333 request-only hotfix from the folder that has all the hotfixes in it and re-created the add-on without it and then the problem went away. Why MS does a check to see if a DLL is valid when it's going to replace it anyways it beyond me.

User avatar
fajar
Posts: 7
Joined: Sat Oct 17, 2009 4:15 pm

Post by fajar » Sun Feb 21, 2010 12:07 pm

is this support for 64bit built ?

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Mon Feb 22, 2010 2:40 am

@SelfMan/eethball: issue not reproducible, sorry. In this case, removing KB889333 from hotfix list is the better choice.

@fajar: Addon creator works in x64 systems but it isn't able to create x64 addons/updatepacks.
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

User avatar
5eraph
Site Admin
Posts: 4621
Joined: Tue Jul 05, 2005 9:38 pm
Location: Riverview, MI USA

Post by 5eraph » Mon Feb 22, 2010 10:19 am

nonno fabio wrote:@fajar: Addon creator works in x64 systems but it isn't able to create x64 addons/updatepacks.
An x64 IE8 addon exists that works for x64 editions of XP/2003, and should work with several languages.

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Tue Feb 23, 2010 8:54 am

@5eraph: thanks for your suggestion and sorry for haven't suggested it before...
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

eethball
Posts: 56
Joined: Thu Mar 01, 2007 2:31 pm

Post by eethball » Wed Feb 24, 2010 12:04 pm

nonno fabio wrote:@SelfMan/eethball: issue not reproducible, sorry. In this case, removing KB889333 from hotfix list is the better choice.
If you create an IE7 addon with the previous cummulative update and KB889333, and then try to install KB978207 manually by running the IE7-WindowsXP-KB978207-x86-ENU.exe you'll see a message saying something about the following images may not be valid and it says to reinstall the update and try again. Then it points to C:\Windows\System32\iepeers.dll and C:\Windows\System32\dllcache\iepeers.dll. If your test includes KB889333 and the latest KB978207 update then the iepeers.dll from KB978207 is used instead so you have no problems. I had 14 computers all reloaded using an addon where KB889333 was included and the problem existed on all of them. Some of these PCs were reloaded back when you guys used to maintain the addon yourself so I know I know it wasn't just a bad integration or something.

I'm sure all new addons that include KB889333 will be fine for the reason I described above, but the problem will exists for users that installed Windows using an addon that included KB889333 before KB978207 was released/integrated into the source.

I didn't mean for this to come off as a rant or anything because I'm very grateful for all your and OnePieces efforts. I just wanted to let you know how to reproduce the error we're talking about. Thanks again for everything.

User avatar
nonno fabio
Posts: 1627
Joined: Mon Jun 06, 2005 10:36 am
Location: Northern Italy
Contact:

Post by nonno fabio » Thu Feb 25, 2010 2:47 am

Thank you very much for pointing this out and for your clear explanation.
You're right, actually Microsoft hasn't considered the presence of KB889333 on existing systems when you install KB978207 running its executable.
For this reason KB889333 has been deleted from the IE7 hotfix integration list.
Don't ask for a different configuration of Onepiece's XP AIO Update Pack: use one of the existing vanilla XP UpdatePack with your preferred addons instead

Post Reply