[RELEASE] Boooggy's WMP 11 direct integration solution

boooggy · Post by **boooggy** » Sun Feb 04, 2007 12:05 pm

i know....but when this happen u should go back after some time.......
whatcounter sometimes crashes......

ENU_user · Post by **ENU_user** » Sun Feb 04, 2007 12:08 pm

i just tried now and works
something about to many net users out their

thanks .

---------------
i think that counter miss counts and crashes .then starts all over again

Xable · Post by **Xable** » Mon Feb 05, 2007 7:35 am

Just for the record whatcounter is a seperate service to my hosting and i nor boooggy are responsible for their downtime.

dolivas · Post by **dolivas** » Mon Feb 05, 2007 11:31 am

Hi everyone,

Looking for some help here I am trying to use the Boooggy's WMP 11 slipstreamer with OEM PRO. Every time I do the slipstream I get this error when trying the install can't find file wmlaunch.exe What is this file and where would it be located? This is the order I am doing the slipstream in.

Clean Windows XP PRO OEM
Boooggy's WMP 11 Slipstream
RyanVm Integrator

Tried doing RMV first then the Slipstream and same error....

I have tried not using any other addons and I still get the same error if I don't use the WMP 11 Slipstream the install works fine? Any suggestions would be great.

Thanks,
Dean

boooggy · Post by **boooggy** » Mon Feb 05, 2007 11:57 am

i will test dolivas and see if its something wrong.....

edit
found the problem...
please send me the eula.txt from your I386

dolivas · Post by **dolivas** » Mon Feb 05, 2007 3:19 pm

Boooggy ok I will send you the file but where do I send it to?

Thanks,
Dean

boooggy · Post by **boooggy** » Mon Feb 05, 2007 3:59 pm

no need dolivas......
we fixed it please redownload and try it.

updated
now it adds the kb929399

dolivas · Post by **dolivas** » Tue Feb 06, 2007 4:58 pm

Boooggy thanks for the quick fix what ever you did it works perfect now.....

Thanks again,
Dean

tsitouridis · Post by **tsitouridis** » Tue Feb 06, 2007 5:43 pm

boooggy wrote:ulysse
slipstreamer is build on addons but it also has new features that u will discover.....
tsitouridis
can u please tell me what exactly are the names for those files?
thx

I also downloaded and used v.04 with the exact same resault. Let me also say that if I use the i386 source of the installation and then install on top wmp11_gr, ti works perfectly.

boooggy · Post by **boooggy** » Fri Feb 09, 2007 3:17 pm

we fixed some buggies and also added kb928788 to it.
so...it is updated.

ricktendo64 · Post by **ricktendo64** » Fri Feb 09, 2007 4:21 pm

Thanks n7 and booogy your WMP11 Slipstreamer is awesome

DigeratiPrime · Post by **DigeratiPrime** » Sun Feb 11, 2007 10:18 pm

nice work on the slipstreamer!

Kiki Burgh · Post by **Kiki Burgh** » Mon Feb 12, 2007 2:47 am

hi boooggy! to which was the fixed applied - both the vanilla & the tweaked addon? date still shows 011507 & 011807, respectively? or has aspi addon been updated too? thanks!

Broly10000 · Post by **Broly10000** » Tue Feb 13, 2007 9:32 am

I wonder iif you could do the slipstreamer like the integrator: Just an app, nothing to install. I copy the WMP11Slipstreamer.exe to a portable HDD to test on other pcs and it works.

boooggy · Post by **boooggy** » Tue Feb 13, 2007 12:55 pm

then what is the problem????

MrNxDmX · Post by **MrNxDmX** » Wed Feb 14, 2007 2:12 am

Kiki Burgh, only slipstreamer updated.

willpantin · Post by **willpantin** » Thu Feb 15, 2007 12:27 am

I had something strange happen today. Will post it here to see if anyone else experienced this!
I used Windows Updates to install the Critical Updates that came out yesterday, February 13. I installed all of them, including updates for Windows XP, Office 2003, and ie7.

When I rebooted, Windows Media Player 11 had disappeared, and seemed as though it had been uninstalled...!

The computer this happened on is my Desktop, which has a Pentium Extreme 3.47 GHz, nVidia 6800 GT and Windows XP Professional (Legit), which had been clean installed Unattended in December. Besides having slipstreamed the December RyanVM Update Pack, that install included Boooggie's December tweaked Windows Media Player 11...

I re-downloaded Windows Media Player 11 from Microsoft and installed it again, and it is working perfectly.

To further complicate figuring it all out, I had discovered "CoolWebSearch" on my computer; perhaps using Spysweeper (and for good measure CWShredder) prior to downloading the critical updates could have been a factor, if some of the infected files that were eliminated were system files...

If that was a factor, ignore my posting here. I just think it is more likely that the updates somehow detected that Boooggie's files were unsigned, and/or tweaked. If no one else here has had my problem, then it was related to CoolWebSearch.

boooggy · Post by **boooggy** » Thu Feb 15, 2007 2:40 am

well indeed strange....
but it has nothing to do with updates and my pack as long as i installed the updates also from wu/mu and wmp 11 is still there......but i have no spyware or related....so i guess it was that... not the updates

Broly10000 · Post by **Broly10000** » Thu Feb 15, 2007 4:01 pm

boooggy wrote:then what is the problem????

Its not really a problem but the thing is i have to install every new version, then copy the .exe to portable HDD then uninstall. I know its your program and you should have your reasons to keep it as an installer, but it should be easier to use as a stand-alone aplication. This is the reason why i dont use nlite, I dont want to install it iin every pc i go to do integrations. Well at least with your program i just need a to copy the exe and use at work. Just my 2 cents. Great program though.

boooggy · Post by **boooggy** » Mon Feb 19, 2007 3:12 pm

updated again
now works with xp sp2 N (reduced media edition)

Sanjay · Post by **Sanjay** » Mon Feb 19, 2007 4:41 pm

boooggy wrote:updated again
now works with xp sp2 N (reduced media edition)

The version and file name are the same as before, ie. wmp11slips0.5i.exe. Is that by design?

n7Epsilon · Post by **n7Epsilon** » Mon Feb 19, 2007 5:52 pm

Yes, i forgot to update the version information but yes it is updated (as evident from last edited post, last post and changed md5).

boooggy · Post by **boooggy** » Tue Feb 20, 2007 3:50 am

updated to version 0.6

c400 · Post by **c400** » Tue Feb 20, 2007 7:01 am

boooggy wrote:updated to version 0.6

after integrating wmp11 Windows Theme doesn`t work
i had this problem with 0.5 version and the same with the new one
i ve tested more then 12 times. with different combinations (vanilla, original, ryan 2.1.6 pack and 2.1.7 and so on)
if i do not integrate WMP11 everithing works great!

what is the problem?

boooggy · Post by **boooggy** » Tue Feb 20, 2007 7:05 am

please let me know what exactly do u do.
and how exactly u describe windows theme not working......

c400 · Post by **c400** » Tue Feb 20, 2007 7:45 am

i am using an alternative windows theme (integrate it through nLite)
if i do not integrate WMP11 everything is ok!
and your WMP integrator v0.3 worked great with absolutely the same my XP box

i integrate updates and addons winth nlite
and only after that i ran WMP11 integrator

starting from 0.5 version i can not use windows XP themes
only the classic one even when i try to run the theme manually (not integrating it)

boooggy · Post by **boooggy** » Tue Feb 20, 2007 8:23 am

ok...... please try like this: run slipstreamer and integrate wmp11 and then run nlite and please dont forget to apply the theme patch from nlite. also after this please report back.......

c400 · Post by **c400** » Tue Feb 20, 2007 11:18 am

boooggy wrote:ok...... please try like this: run slipstreamer and integrate wmp11 and then run nlite and please dont forget to apply the theme patch from nlite. also after this please report back.......

ohh thanks!!! it works great!!!
1)integrate WMP11
2)nlite

boooggy · Post by **boooggy** » Tue Feb 20, 2007 11:27 am

ok great....
that happened cause slipstreamer updates the uxtheme.dll and that one is not patched....so unsigned themes will not work if its not patched again.....

mr_smartepants · Post by **mr_smartepants** » Tue Feb 20, 2007 11:45 am

Great work guys!
Just one minor bug report...The first page of the installer text quotes "This will install WMP11 Slipstreamer 0.5 on your computer", but the installed version is 0.6

Told you it was minor.

boooggy · Post by **boooggy** » Tue Feb 20, 2007 12:10 pm

thx smartepants
fixed.

uvaguest · Post by **uvaguest** » Tue Feb 20, 2007 1:40 pm

Hello everyone, noob question here:

Has anyone had any problems with mp3 players after slipstreaming? I have a creative zen vision:m and after slipstreaming wmp11 and doing a clean install, Windows no longer recognizes the player. I always get an error saying that the MTP device failed to be recognized. My sequence of integrating was as follows:

Slipstream SP2
Slipstream WMP11 (tweak version)
Integrated post SP2 pack, IE7
nLite (removed windows messenger, tour)
Made ISO

Everything installed flawlessly, except now I'm getting this error. Before I reinstalled everything on my laptop I was also using WMP11 that I downloaded from M$ and my player was able to be recognized. Perhaps there is something in the tweaked version that's causing this error?

Thanks for your help!

mr_smartepants · Post by **mr_smartepants** » Tue Feb 20, 2007 2:49 pm

Oooh Boooggy...I found another one.
It's listed in Add/Remove programs as version 0.5, not 0.6.

I've uninstalled/clean installed and it persists.
Sorry.

boooggy · Post by **boooggy** » Tue Feb 20, 2007 3:02 pm

smartepants
i dont know what happened but i have version 0.6 into add/remove.
uvaguest
please be sure about what u removed with nlite.....i tried my mp3 player on wmp 11 tweaked and everything went great.
also found this on google
http://www.mcse.ms/message2377709.html

uvaguest · Post by **uvaguest** » Tue Feb 20, 2007 3:39 pm

boooggy

removed only msn explorer, windows messenger, and the tour, none of which have anything to do with wmp11 correct?

Which mp3 player do you have? Have also done extensive searches on google and creative forums but nothing suggested has helped so far.

boooggy · Post by **boooggy** » Fri Feb 23, 2007 4:38 pm

updated with kb929773

Lemonzest · Post by **Lemonzest** » Sat Feb 24, 2007 6:29 am

the update packs are not updated? is it only the slipstreamer thats updated with the new patch?

boooggy · Post by **boooggy** » Sat Feb 24, 2007 7:24 am

shon3i · Post by **shon3i** » Sat Feb 24, 2007 7:40 am

@boooggy, nice work as usual, one thing disturb me in tweaked addon, that is Show Classical Menu, can i somehow turn it off in you package.

Thanks

boooggy · Post by **boooggy** » Sat Feb 24, 2007 8:16 am

shon
unpack the pack
then go look for wmp11en.inf
open it
search for this line

Code: Select all

HKCU,"%WMP%\Preferences","ShowAppTitlebarVTen",0x10001,1

change it to

Code: Select all

HKCU,"%WMP%\Preferences","ShowAppTitlebarVTen",0x10001,0

save it and pack back the pack. done it

shon3i · Post by **shon3i** » Mon Feb 26, 2007 4:02 pm

Thanks boooggy, this working fine, one more thing is left, that is your icon

, i don't love it, did i can replace your exe with exe from microsoft lastest package?

boooggy · Post by **boooggy** » Tue Feb 27, 2007 12:20 am

if u use the slipstreamer u can choose the icon.....

Tr110022 · Post by **Tr110022** » Tue Feb 27, 2007 5:47 am

thanks for the great slipstreemer.
i tried it in windows xp and all went ok. but when i try it in windows vista (as host os, i am integrating it to win xp files) it didnt work, and it gave the following error ..

WMP11Slipstreamer.ArchiveMethods+ArchiveProcessException: An error occurred while creating "wmp11.cab" ---> System.ApplicationException: AddFile failed with code None
at Mischel.CabDotNet.CmpRoutine.AddFile(String filename, String nameInCab, Boolean execOnDecompress, FciCompression compressType)
at System.IO.Compression.CabCompressor.recursiveCompress(String fileOrFolderPath, String stripPrefix)
at System.IO.Compression.CabCompressor.CompressFiles(String sFolder, Boolean recursive, CompressorProgressCallback callbackMethod)
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetCreate(String cabinetPath, String sourceFolder, Boolean recursive, Boolean log, CompressorProgressCallback callback)
--- End of inner exception stack trace ---
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetCreate(String cabinetPath, String sourceFolder, Boolean recursive, Boolean log, CompressorProgressCallback callback)
at WMP11Slipstreamer.Backend.CompressFiles()
at WMP11Slipstreamer.MainGUI.workerMethod(Object addonSettings)

Deleting "D:\Documents\Microsoft\Windows Updates Packs\02.07\i386\wmp11temp"... Done!

The source being modified has not been damaged.
All changes have been successfully reverted.

i tried v. 0.5 and 0.6

thanks

n7Epsilon · Post by **n7Epsilon** » Tue Feb 27, 2007 6:47 am

The problem is in cabinet.dll v6.0 bundled with Vista.

To solve the problem temporarily while I investigate the changes needed, please expand cabinet.dl_ from your Windows XP source to the same folder as the WMP11Slipstreamer and then try slipstreaming again.

This will force wmp11slipstreamer to use the xp version of the cab functions.

Tr110022 · Post by **Tr110022** » Wed Feb 28, 2007 2:28 am

thanks for the help

its working now.

MrNxDmX · Post by **MrNxDmX** » Fri Mar 02, 2007 6:12 pm

The latest slipstreamer worked OK on my turkish windows xp test system. Thanks for the update.

bober101 · Post by **bober101** » Sun Mar 04, 2007 10:26 am

i have exprianced only one issue with the slipstreamer.
i have win mce.
when patching the uxtheme.dll with an addon like for example zakam's patch, it edits the file.
if after i use the slipstreamer to add wmp11,it overwrites the uxtheme.dll file insted.
wich results in a non hacked uxtheme file.i think it would be better to use an edit patch than to overwrite the file,or in the gui ask the user to add the uxtheme fix or not..

boooggy · Post by **boooggy** » Sun Mar 04, 2007 10:44 am

bober that uxtheme is the original one provided by microsoft....and we add it casue its fixing the theme issues that many reported after slipstreaming wmp11 into windows source. i wont modify anything on slipstreamer regarding this. and please dont blame me, blame m$ cause they're only able to create more bugs with their new products........

if u want to have the patched one just use slipstreamer first and then integrate your patched one.

updated both addons with
kb928788
kb929399
kb929773
kb931756

bober101 · Post by **bober101** » Sun Mar 04, 2007 11:08 am

dont get me wrong im not "blaming" any one. do you know exatcly what ms is doign to the uxtheme? or is it replacing the current one in the os by an other one with a new build number?

but if the uxtheme.dll in the slipstreamer was patched,wouldint it be ok?

Protagonist. · Post by **Protagonist.** » Sun Mar 04, 2007 3:47 pm

Which is better to use, addon or slipstreamer?

RyanVM.net Discussion Board

[RELEASE] Boooggy's WMP 11 direct integration solution

Missing wmlaunch.exe file

eula.txt files

Thanks

is it woking from windows vista?