[Release] Kels' UberPacK v16.6 & Notepad2-Mod

benjamminzIS · Post by **benjamminzIS** » Thu Jul 03, 2008 8:12 pm

it never worked until I added the other reg entries... doesn't make sense but I also never bothered to contact the developer to ask either...

benjamminzIS · Post by **benjamminzIS** » Thu Jul 03, 2008 11:57 pm

Kelsenellenelvian wrote:A quick test run shows this:

I can add in the other stuff in the next version if you agree it is still needed.

I am not sure how it works without these reg entries, as I JUST found out on a test install. I had forgot to change one character of the 2nd line that I posted and until I manually changed that value to be correct it had no "context menu" feature...

Kelsenellenelvian · Post by **Kelsenellenelvian** » Wed Jul 09, 2008 12:28 am

Updated UberPacK AND Notepad++

dkrus · Post by **dkrus** » Wed Jul 09, 2008 12:50 am

Thanks Kel

ton80 · Post by **ton80** » Wed Jul 09, 2008 1:27 am

Thanks Kel.. Just in time for my correction of burn over the weekend.

ENU_user · Post by **ENU_user** » Wed Jul 16, 2008 8:49 am

moved

larciel · Post by **larciel** » Thu Jul 24, 2008 2:42 am

anyone experience little delay in startup with this addon?
There's about 30second delay after desktop loads.

Also unlocker assistant isn't loading up.

Thanks in adv Kel

garson · Post by **garson** » Mon Aug 11, 2008 1:14 am

Notepade++ 5.0.3 is out.

Please update.

Cipherfx2 · Post by **Cipherfx2** » Mon Aug 11, 2008 7:21 am

Link is dead...

"Page cannot be found"

Kelsenellenelvian · Post by **Kelsenellenelvian** » Mon Aug 11, 2008 7:28 am

Updated the UberPacK doing notepad++ tomorrow..

Cipherfx2 · Post by **Cipherfx2** » Mon Aug 11, 2008 8:50 pm

Thanks Kels for the Update

Kelsenellenelvian · Post by **Kelsenellenelvian** » Fri Aug 15, 2008 2:49 am

Updated Notepad++ to 5.0.3

garson · Post by **garson** » Fri Aug 15, 2008 9:54 am

Kelsenellenelvian wrote:Updated Notepad++ to 5.0.3

Thanks man.

sgmihai · Post by **sgmihai** » Fri Aug 29, 2008 7:50 am

Kels_NotePad++_v5.0.3_addon_replacer.cab
this one had a bug for me, after integrating with nlite and installing windows, wen i doubled click a .txt file, notepad++ would start but without that file loaded. I went to notepad++ official site and followed their instructions for replacing windows' notepad, and now it works. does anyone know what's wrong ?

crashfly · Post by **crashfly** » Fri Aug 29, 2008 7:55 am

It sounds like the registry "hijack" method did not work on your computer.

sgmihai · Post by **sgmihai** » Fri Aug 29, 2008 8:03 am

is this because of nlite?

crashfly · Post by **crashfly** » Mon Sep 01, 2008 3:19 pm

sgmihai wrote:is this because of nlite?

No. I use nlite all of the time. Sounds like something did not get integrated properly.

Kelsenellenelvian · Post by **Kelsenellenelvian** » Thu Sep 11, 2008 1:36 am

Updated...

dkrus · Post by **dkrus** » Thu Sep 11, 2008 10:37 pm

Thanks Kel

crashfly · Post by **crashfly** » Thu Sep 11, 2008 11:00 pm

Yes, we cannot say it enough ... thank you very much Kelsenellenelvian.

RtOaNn · Post by **RtOaNn** » Mon Sep 15, 2008 1:15 am

After installing the above addon, can i still update Notepad++ in the future?

Kelsenellenelvian · Post by **Kelsenellenelvian** » Mon Sep 15, 2008 1:25 am

RtOaNn · Post by **RtOaNn** » Mon Sep 15, 2008 1:30 am

ok,cool! thanks!

Kelsenellenelvian · Post by **Kelsenellenelvian** » Wed Sep 17, 2008 1:39 am

Updated Notepad2!

Thansk FLorian and Code!

dnoiz · Post by **dnoiz** » Sat Sep 20, 2008 7:34 am

http://www.wpiw.net/downloads/addons/Ke ... _v13.4.CAB

is dead?

r.

55ttt · Post by **55ttt** » Sun Sep 21, 2008 12:20 pm

dnoiz wrote:http://www.wpiw.net/downloads/addons/Ke ... _v13.4.CAB
is dead?

Same here.

dkrus · Post by **dkrus** » Sun Sep 21, 2008 12:45 pm

I seen on wincert it was updated to 13.5

crashfly · Post by **crashfly** » Sun Sep 21, 2008 1:14 pm

Well if it helps any, I already got the file from over off of wincert.

Thank you very much for keeping this as well as the notepad2 addon updated Kel. Your work is important to me. Keep up the great work.

55ttt · Post by **55ttt** » Sun Sep 21, 2008 1:39 pm

http://www.wincert.net/forum/index.php?showtopic=336

code65536 · Post by **code65536** » Sun Sep 21, 2008 3:18 pm

Suggestion: If you are going to turn on ClearType by default, you might want to consider the following registry entry as well:

Code: Select all

HKCU,"Control Panel\Desktop","FontSmoothingGamma",0x10001,b0,04,00,00

Background: I've noticed that Vista's ClearType usually looks fantastic out-of-the-box while XP's look pretty bad without tuning. I used to think that this was because Vista's ClearType was somehow better than XP's. But it turns out that they're the same, and that the only difference is that Vista's default gamma value is set to 1200 while XP's is set to 1400 (you can check this by making the SPI_GETFONTSMOOTHINGCONTRAST API call after a clean Vista install and after a clean XP install). This key will change the CT gamma value in XP to match that in Vista.

dnoiz · Post by **dnoiz** » Wed Sep 24, 2008 5:50 am

55ttt wrote:http://www.wincert.net/forum/index.php?showtopic=336

Thank you

.

r.

Kelsenellenelvian · Post by **Kelsenellenelvian** » Sun Oct 19, 2008 4:10 am

Updated.

dkrus · Post by **dkrus** » Mon Oct 20, 2008 5:07 pm

Thanks Kel

crashfly · Post by **crashfly** » Wed Oct 29, 2008 1:11 pm

Kelsenellenelvian, is there any possible chance that you have a x64 bit version of this addon, or could point me to one that has all of the programs your addon does?

I am hoping that you have made a 64 bit version of this addon, because I really like the addons that you make. I cannot see myself living without certain ones.

If you do not have a 64 bit version, is there a way to make this one compatible with a 64 bit install?

Kelsenellenelvian · Post by **Kelsenellenelvian** » Wed Oct 29, 2008 11:55 pm

Man my experiances with x64 have all been BAD!!!

I will gladly help you with making one, as for me though I won't be making one in the near future.

Remember though most of this stuff Will not work on x64 so we would have to find alternatives.

mindwarper · Post by **mindwarper** » Sat Nov 01, 2008 6:21 am

Kel it seems in the 1st post of this thread the link to the NotePad2 addon is invalid...
Please take a look, iof you find the time of course (no offense intended)...

EDIT:
Ok my mistake...
I saw over at that very wincert link, that it had been updated to the RC3 version

Sorry for the hassle

cynric · Post by **cynric** » Sat Nov 01, 2008 11:23 pm

Nice pack -- still going through all the tools. In the process, I found a few dead links. Suggestion provided.

Calculator Plus: http://www.microsoft.com/downloads/deta ... 47f157c091 Dead page.

RegShot: http://sourceforge.net/projects/regshot/ Site moved.

CabTool: Links to msfn ok, but the subsequent download link is broken. Haven't found another place to obtain it. The link does provide info on the tool so it's still informative.

Attribute Changer: http://www.petges.lu/ Site moved.

Create ISO: Wrong link (looks like you got off by one). See next.

File Extension Toggle: This link is actually for Create ISO. FET should point back to http://www.msfn.org/board/index.php?showtopic=52524

HashTab: Site appears to be down. Temporary thing?

cybpsych · Post by **cybpsych** » Sun Nov 02, 2008 4:21 am

nore sure if you know this, but Notepad2 v3.0.20 (Final) is out.

EDIT: Open Command Prompt Shell Extension has been updated to v1.1.2

cheers!

EDIT: Attribute Changer updated to v6.1 with new URL as well: http://www.petges.lu/windows/changelog/changelog.html

TechnoHunter · Post by **TechnoHunter** » Sun Nov 02, 2008 4:37 am

cynric wrote:HashTab: Site appears to be down. Temporary thing?

link works for me.. check dns cache maybe?
good luck!

TechnoHunter

Kelsenellenelvian · Post by **Kelsenellenelvian** » Sun Nov 02, 2008 5:18 am

Looks like its time to update it all :O

I will try tonight but it's been a long day and I have a long day tommorow

@Cynric thanks for the leg work!

Kelsenellenelvian · Post by **Kelsenellenelvian** » Sun Nov 02, 2008 7:54 am

I still have the original CabTool Setup so if you want it just shout please.

Every component has been updated!

I am running the VM test now though

They have passed the other normal tests though

cynric · Post by **cynric** » Sun Nov 02, 2008 9:21 am

Bah. I should have checked versions while I was peeking at everything. Downloading update now.

If you don't mind, I would like tuck a copy of CabTool away in case the internet is nuked :)

Kelsenellenelvian · Post by **Kelsenellenelvian** » Sun Nov 02, 2008 9:31 am

Sure no prob...

http://www.wpiw.net/downloads/cabtool.exe

I checked around and am pretty sure the uber-pack is fully upto date now

cynric · Post by **cynric** » Sun Nov 02, 2008 9:32 am

Thanks for the link. No problems using 13.7 so far.

cybpsych · Post by **cybpsych** » Tue Nov 11, 2008 7:07 pm

hi kel, Notepad++ v5.1.1 is out

Changelog:
- Fix Unicode version display Korean/Japanese language problem.
- Fix bug : Open in new instance not allowing spaces in paths.
- Fix "Global Styles" string incorrectly displayed in Unicode version.
- Fix filters for open/save dialog not showing or incorrectly (showing 'L').
- Fix calltip argument with 'L' leader character bug.
- Fix tab control draw bug.

cybpsych · Post by **cybpsych** » Tue Nov 25, 2008 4:07 am

Attribute Changer 6.10a released

Code: Select all

http://webplaza.pt.lu/rpetges/download/ac.exe

Some issues were reported for Attribute Changer 6.10 and they are now fixed in this maintenance release.

Updates

- Picture date and time checkboxes now unchecked by default

Bug fixes

- JPEG Error 52 while modifying EXIF data
- 'Failed to set calendar date or time' error on Windows Vista
- Copy buttons fail on Windows Vista for DateTimePicker operations

Microsoft decided to change the way the DateTimePicker common control behaves for Windows Vista and this broke Attribute Changer. The only way to work around this problem is to use native Win32 API calls instead of Delphi class methods .... but it took me a long time to figure out what broke.

Kelsenellenelvian · Post by **Kelsenellenelvian** » Wed Nov 26, 2008 3:04 am

Updated.

dkrus · Post by **dkrus** » Fri Nov 28, 2008 5:39 pm

Thanks Kel

Raoul90 · Post by **Raoul90** » Sun Nov 30, 2008 4:31 am

OpenCMD v1.1.3 is out.

Thank you.

Kelsenellenelvian · Post by **Kelsenellenelvian** » Sun Nov 30, 2008 5:37 am

Yeah I got the memo

RyanVM.net Discussion Board

[Release] Kels' UberPacK v16.6 & Notepad2-Mod

Notepad++ Uninstallable Version